2012 Mercedes Cls 550 V8 Twin Turbo With Navigation And Lane Departure System on 2040-cars

Auto blog

Mercedes recalls 2,600 S-Class models in two campaigns

If you're the owner of a 2015 S-Class, you may get a notice soon from your local Mercedes dealership to bring in your pride and joy. But only if you own one of the specific models being recalled in two separate campaigns. The larger of the two affects the Mercedes-Benz S550 4Matic, Mercedes-AMG S63 4Matic, and Mercedes-AMG S65 coupes – all from the 2015 model year and manufactured between January 27, 2014, and April 2, 2015. Those models could have had their front seat belts installed on the wrong side, so the driver's side belt may have been fitted to the front passenger seat, and vice versa. Since the seat belt mechanisms are designed for specific sides of the vehicle, they may not lock as required, and the child seat restraint on the passenger side might not work, either. As a result, Mercedes is recalling 2,580 such units in the United States to have those belts inspected and replaced as necessary. In parallel, the Silver Star automaker is also calling in four – that's right, just four – examples of the 2015 S550 Hybrid. In those few units, the fuel pump may not be able to restart the internal combustion engine when needed, and the vehicle could stall. You can read both of the recall notices from the NHTSA below. RECALL Subject : Incorrect Seat Belt Position/FMVSS 208, 209 Report Receipt Date: OCT 14, 2015 NHTSA Campaign Number: 15V657000 Component(s): SEAT BELTS Potential Number of Units Affected: 2,580 Manufacturer: Mercedes-Benz USA, LLC. SUMMARY: Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2015 S550 4Matic Coupe, AMG S63 4Matic Coupe, and AMG S65 vehicles manufactured January 27, 2014, to April 2, 2015. In the affected vehicles, left-side front seat belts may have been installed on the right-side and vice versa. As a result, the installation angle may be incorrect, affecting the seat belt locking behavior. Additionally, the child seat restraint function for the passenger seat would not be available. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection," and FMVSS number 209, "Seat Belt Assemblies." CONSEQUENCE: If the seat belt is installed improperly, it may not properly restrain the seat occupant in the event of a crash, increasing the risk of injury. REMEDY: MBUSA will notify owners, and dealers will inspect the installation of the seat belts, correcting them as necessary, free of charge.

2015 Mercedes C-Class owners reporting bleeding seats [UPDATE]

UPDATE: Daimler AG became aware that, in a small number of individual cases, it is possible for temporary spots and/or shiny patches to form on the man-made leather surfaces of the 2015 C-Class in sub-freezing temperatures. No accidents or injuries have been reported, and we have no reason to believe that there are any hazards to customers. Replacement parts are expected to start shipping to dealers by next week. Owners of the 2015 Mercedes-Benz C-Class are learning the hard way that you don't necessarily want to buy a new vehicle in its first model year. Besides reports of poorly fitting taillights and faulty infotainment touchpads, a number of reports are popping up on the forums of MBWorld.org claiming that the compact luxury sedan's seats are, for lack of a better term, bleeding. Owners of US-built, 2015 C-Classes fitted with MB Tex vinyl interiors are reporting a white, oily, shiny residue discoloring their seats that shows up, often after cold cars are quickly heated. It's important to note that this residue is not necessarily staining the seats permanently – warm, soapy water is often all that's needed to restore the original finish. In other cases, the residue disappears of its own accord, only to reappear in an entirely different pattern. That doesn't make things any more acceptable to owners, many of whom have reached out to Mercedes with complaints. It's not clear how many vehicles are affected, but there are a sizable number of forum threads on the issue on MBWorld alone, and the problem is prevalent enough that Mercedes has issued a technical service bulletin to its dealers. According to the forum postings, the TSB instructs service technicians to replace the headrest and seat cover (except for the front, passenger-side seat bottom because of "factory calibration issues") in affected customer vehicles. New C-Class models in dealer inventories, meanwhile, are to get the soapy water treatment if they're showing signs of the residue. Neither one of those moves seems to represent a long-term fix, though. Black MB Tex seats – both the standard and sport variety – seem to be particularly susceptible to the residue, although we stumbled across at least one image of what looks like Silk Beige MB Tex with speckles of residue.

Hydrogen could deliver one fifth of world carbon cuts by 2050, industry says

BONN, Germany — Increasing the use of hydrogen in power, transport, heat and industry could deliver around one fifth of the total carbon emissions cuts needed to limit global warming to safe levels by mid-century, a report by the Hydrogen Council said on Monday. To encourage industries to use hydrogen, Toyota and Air Liquide helped set up the Hydrogen Council, a global lobby launched in January this year. Its 27 members include automakers Audi, BMW, Daimler, Honda and Hyundai, and energy firms such as Shell and Total. The council said using hydrogen for transport, energy generation, energy storage, industry, heat and power could cut annual carbon emissions by 6 billion tonnes by 2050. "This would ... contribute roughly 20 percent of the additional abatement required to limit global warming to two degrees Celsius," the council said in a report released on the sidelines of a U.N. climate conference in Bonn. To achieve a two-degree limit this century agreed by governments in Paris in 2015, the world must reduce energy-related carbon emissions by 60 percent by 2050. The report said one in 12 cars sold in California, Germany and Japan were expected to be powered by hydrogen by 2030. By 2050, hydrogen could power 400 million cars, 15 million to 20 million trucks, around 5 million buses, a quarter of passenger ships and a fifth of non-electrified train tracks, as well as some airplanes and freight ships. Achieving this shift in transport and other sectors would require investment of $280 billion by 2030, with about $110 billion to fund hydrogen output, $80 billion for storage, transport and distribution, and $70 billion to develop products. Fuel cell vehicles combine hydrogen and oxygen to produce electricity to power an electric motor, producing water as a byproduct. However, making hydrogen from fossil fuels, a common route, also produces some greenhouse gas emissions. So far the take-up of hydrogen vehicles is tiny and industry experts say their wider use is years away, with high purchase prices and a lack of refueling stations the major barriers. But some firms, such as miner Anglo American and carmaker Toyota, are pushing for fuel cell cars to play a role even with the rise of battery-powered electric vehicles (EVs). Woong-chul Yang, vice chairman of automotive research and development at Hyundai said EVs and hydrogen fuel cell cars were needed because EVs were better for city driving and fuel cell vehicles better for longer journeys.