2012 Mercedes-benz Cls63 Amg, Matte Finish, Low Production! on 2040-cars

Auto blog

2014 Mercedes-Benz C63 AMG Edition 507 still lights our fire

The current Mercedes-Benz C63 AMG may be in the autumn of its years, but it's still one of our very favorite sport sedans. Ever. Yes, its paddle-shift transmission may not always follow orders, but with stupendous levels of thrust from its charismatic naturally aspirated 6.2-liter V8, ebullient rear-wheel-drive dynamics and that noise, we frankly don't care that it's getting on a bit.
As a sendoff of sorts for the current generation, Mercedes-Benz has just introduced a new Edition 507 model at the Geneva Motor Show, with 507 horsepower and 450 pound-feet of torque - an increase of 56 horses over the standard car. Mercedes credits the substitution of low-mass internals from the SLS AMG gullwing for the power bump, a tactic shared with the AMG Development Package upgrade that has been subsumed by this Edition 507. 0-60 is quoted at 4.1 seconds and top speed at 174 mph.
The Edition 507 borrows its aluminum hood from the C63 AMG Black Series Coupe, along with spidery new 19-inch wheels in either titanium gray finish or matte black with shiny rim flanges. As seen on our gallery car above, a sports striping package is also featured, as are glossy black grille, daytime running lamps, spoiler and mirror caps.

Mercedes-Benz releases US-spec 2014 Sprinter details

Last week, Mercedes-Benz released the details for the updated 2013 Sprinter intended for global markets, but this week it has announced what changes are being made to the US-spec version of the van for the 2014 model year, including the Freightliner model. As expected, most of the changes made to the European model will be present on the 2014 Mercedes-Benz Sprinter when it goes on sale in the US, which is expected to be this fall.
The biggest difference between the Sprinter announced last week and the one headed to our shores is what is found under the hood. While European Sprinters will come with diesel engines and offer the availability of a supercharged four-cylinder gasoline or CNG engine, US Sprinters will still offer the 3.0-liter V6 BlueTEC diesel. This year's Sprinter now comes standard with a new base engine, the 2.1-liter four-cylinder BlueTEC diesel. This smaller engine will produce 161 horsepower and 265 pound-feet of torque, and will be paired to a seven-speed automatic transmission; the optional 3.0 V6 puts out 188 hp and 325 lb-ft of torque, and will be mated to a six-speed auto.
Fuel economy for the new Sprinter has not been announced, but Mercedes-Benz has made numerous changes with the goal of improving efficiency. To this end you'll find a new, low-friction rear axle and the optimization for the generator, fuel pump and power steering pump.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...