2011 Silver Bluetec! on 2040-cars

Auto blog

Mercedes G 500 4x4 is mighty mean and bright lime green

The Mercedes-Benz G500 4x42, finally ready to meet the crowds at the Geneva Motor Show, might just be the best factory-prepped expedition off-roader on the market, should Mercedes choose to build it. The short story is that some well-heeled admirers of the G63 AMG 6x6 said, "It's nice, but can you take it down a notch?" And by "notch" they meant "an axle." So the G500 4x42 gets just two portal axles instead of three, and a slew of other features. The 4x4 squared offers up a standard G-wagen body, but instead of the 5.5-liter twin-turbo V8 from the G63, there's a new 4.0-liter twin-turbo V8 with 422 horsepower and 450 pound-feet of torque. Compared to the standard G500, the track is 11.8 inches wider, the street-cred rims being 22-inchers on 325/55 R-series tires. When it's time to get dirty, they can be swapped for an optional set of 18-inch wheels with 37-inch beadlock tires. With that setup and the same wheelbase as the G500 LWB, ground clearance and fording depth are more than doubled to 17.7 inches and 39 inches respectively, the angle of approach goes from 36 degrees to 52 degrees and the angle of departure leaps from 27 degrees to 54 degrees. Breakover angle is bumped from 21 degrees to 47 degrees, a two-piece stainless steel undertray protecting the sensitive bits when you push it. The only parts that get a raised eyebrow are the carbon fiber wheel arches and bumpers, which might behave badly when they meet an immovable granite object. To escape the sensation of driving the Taj Mahal in urban environments, there's a twin spring-and-damper setup at each wheel. One of the spring-damper combos is electronically controlled and adjustable, and when called into action via the Comfort or Sport mode, takes control of wheel action; even when passive, it will kick in to automatically to stiffen the body if it detects evasive maneuvers. On top of all that, to remind you that you're in a Mercedes the interior is fitted out with Designo leather trim and diamond-quilted microfiber. Mercedes is going to gauge its Geneva reception before deciding to build it, a hurdle we're sure will be overcome. Car and Driver drove it and verified it's the real deal, with pricing - if it's built - speculated to land between the G63 AMG and G65 AMG. The press release below has all the details. Related Video: Near-series show car G 500 4x42: The G-Class Squared Stuttgart, Feb 21, 2015 -- Only a G-Class can be better than a G-Class.

Mercedes highlights dangers of counterfeit wheels

Mercedes-Benz Australia is getting the word out that consumers need to make sure they get the real deal when purchasing auto parts. To demonstrate that concept in dramatic fashion, the company bangs an imitation and genuine wheel through a pothole at Holden's proving ground to see what happens. The results speak for themselves. While counterfeiting is often associated fashionable goods like handbags or sunglasses, it wreaks havoc on the auto industry, too. A 2007 study estimated Ford lost $1 billion a year from fake parts, and Aston Martin had to recall a huge swath of vehicles because a sub-supplier used knock-off plastic. To fight the problem here, the US government and some states have passed laws to ban counterfeit components. In this case, Mercedes uses the stunt to argue the fake parts are a safety issue Down Under. While the two wheels look practically identical at first, they definitely don't perform the same. The slow-mo footage of the impact clearly shows just how differently the pair takes the punishment, and why counterfeit wheels are such a safety issue. Related Video:

Mercedes-Benz expands GLC production to Valmet in Finland

Mercedes assembles the GLC (alongside several other model lines) at its plant in Bremen, Germany, just like its predecessor. But starting in 2017, it will also begin outsourcing additional production of the compact crossover to Valmet in Uusikaupunki, Finland. The move is earmarked to give the German automaker additional capacity, especially as it rolls out a right-hand-drive version for markets like the UK, Australia, and Japan. The new GLC was introduced this year as the successor to the GLK and crossover counterpart to the C-Class. It slots into Benz's realigned SUV lineup above the smaller GLA and below the larger GLE and GLS models. A four-door coupe variant is also expected to follow. Like the GLK before it, the GLC is assembled in Bremen, where Mercedes also builds the C-Class, the two-door versions of the E-Class, and the SL and SLK roadsters. This isn't the first crossover whose production Mercedes has outsourced, nor is it the first time it has contracted Valment for automotive assembly. Though only offered in China at this point, the R-Class is built by AM General in South Bend, Indiana. And the G-Class is assembled by Magna Steyr in Graz, Austria. Aside from past clients like Porsche and Fisker, Valmet has also produced the A-Class for Mercedes since 2013, and will continue to do so, albeit at a reduced output in order to focus on the new crossover.Related Video:   Manufacturing contract for Valmet Automotive: Mercedes-Benz Expands Production Capacities for the GLC Stuttgart, Germany, Nov 26, 2015 - From 2017, the new GLC will also roll off the line in Uusikaupunki, Finland. - The Bremen plant continues to be the main production plant. - Markus Schafer, Member of the the Divisional Board Mercedes-Benz Cars, Produktion and Supply Chain Management: "Working with contract manufacturers is an important factor in our global production strategy at Mercedes-Benz Cars." Mercedes-Benz is continuing its growth strategy and expands production capacities for the new GLC. The main production facility continues to be the Mercedes-Benz plant in Bremen, Germany, where the GLC has been produced since July. The Finnish contract manufacturer Valmet Automotive will produce additional volumes of the new mid-range SUV from 2017, at its plant in Uusikaupunki.