No Reserve 1-owner Clean Carfax Leather Navigation Back Up Camera New Tires on 2040-cars

Auto blog

Mercedes C-Class Cabriolet advances to prototype stage

Following up on last month's sighting of the Mercedes-Benz C-Class Coupe, we've got a pretty sizable update on the C-Class Cabriolet, after a prototype of the new droptop was spotted undergoing testing in Germany. A quick comparison with last year's spy photos shows that Mercedes has made a lot of progress, moving on to full-blown production prototypes with a minimal amount of camouflage. Really, though, we already knew what the C-Class Cab would look like – identical to a C-Class sedan below the beltline, although the tail will likely be a bit more sporting – these spy photos merely confirm that. Expect to see the production C-Class Cabriolet debut at (or more likely shortly before) the 2015 Frankfurt Motor Show, where it will appear alongside the next-generation C-Class Coupe. Check out the spy photos up top. Related Video:

Mercedes-AMG to phase out 5.5-liter V8 after next year [UPDATE]

UPDATE: A previous version of this story indicated that AMG's 6.0-liter twin-turbo V12 was still mated to a five-speed automatic transmission, however the latest models (including the S65 AMG sedan and coupe, SL65 roadster and G65 sport-ute are equipped with the newer seven-speed unit. Mercedes also reached out to point out that the 5.5-liter engine will be phased out gradually, not overnight. There's a lot to love about AMG's 5.5-liter twin-turbo V8. It produces as much as 577 horsepower and 590 pound-feet of torque, and delivers blistering performance to even the heaviest of vehicles. But try not to get too attached, because like its 6.2-liter, naturally aspirated predecessor, it's not long for this world. The latest word comes from Autocar, which reports that Mercedes will release the last applications for the 5.5 biturbo within these next two calendar years in the new GLE63 AMG and upcoming S63 AMG convertible. After that, even though it was only introduced in 2011, it will be phased out. Fortunately Affalterbach has a worthwhile successor already in place in the 4.0-liter twin-turbo V8 from the Mercedes-AMG GT. The smaller powerplant, already in store for the new C63, is already producing 503 hp and 479 lb-ft in S spec. That's still shy of the larger unit's output, but where the 5.5 is nearing the end of its production cycle, the 4.0 is just starting out. Of course the 4.0-liter biturbo isn't the only engine AMG is making these days. Smaller models (based on the front-drive platform) employ the 45-designation, high-output 2.0-liter turbo four. Models at the very top of the lineup, however, use a 6.0-liter twin-turbo V12 that may be a dinosaur, but with 621 hp and 738 lb-ft of torque on tap, still can't be beat.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...