C300 Luxury Premium 1 Pkg Ipod Msrp $40k Warranty Must See!!! on 2040-cars

Auto blog

Brabus 850 6.0 Biturbo Coupe is an extroverted, 217-mph Mercedes S63 AMG

The Mercedes-Benz S-Class is a prime example of handsome, restrained design. It's classy but not shouty, stylish without trying too hard. Of course, Brabus can address that um, problem, for you, without much issue. Meet the Brabus 850 6.0 Biturbo Coupe, an extensively modified version of the S63 AMG Coupe. Larger intakes and lots of carbon fiber typify the front end, while the tail sports a new diffuser and rear spoiler, both of which are finished in carbon fiber. Meanwhile, Brabus is offering a variety of wheel designs, ranging in size from 18 to 22 inches, and with the customer's choice of Continental, Pirelli and Yokohama rubber. The most questionable changes, though, happen in the cabin, where black Mastik leather is finished with copper stitching and piping. Brabus then takes 219 different interior trim pieces and lines them in Shadow Gold paint, just like the Monoblock wheels featured on the vehicle above. Of course, Brabus does much, much more than just offer its own take on the normally conservative Mercedes aesthetics. There's a bit of tweaking to the powertrain. Despite the "6.0" in its name, the donor S63 AMG's 5.5-liter, biturbocharged V8 has been enlarged to just over 5.9 liters (5,912 cc, to be precise), thanks to a larger cylinder bore and a longer stroke, the latter of which comes from a Brabus-spec crankshaft. While Brabus may be exaggerating about the size of its new coupe's engine, the tuning firm is not overstating said powerplant's output. A stout 850 horsepower is teamed with an electronically limited 848 pound-feet of torque. There's more to this modded Mercedes than that, though, as Brabus claims the 5.9-liter is actually capable of turning out a silly 1,069 lb-ft, but that it needed to be limited "in the interest of the longevity of the entire powertrain." All this extra oomph comes from a pair of "special" Brabus turbochargers, as well as new exhaust manifolds and a stainless steel exhaust system. A new intake module also helps breathing, while the engine's ECU has been updated for extra performance. Aside from a new set of paddle shifters, the S63 AMG's seven-speed gearbox was left unaltered, as was the 4Matic all-wheel-drive system. Oh, and if you live in Europe and really want to scare yourself, Brabus will offer the same engine treatment to the rear-drive S63 AMG that we don't get Stateside.

Mercedes-AMG GT and C63 to serve as F1 safety, medical cars

Mercedes has spent nearly 20 years providing the safety and medical cars for Formula 1, so it was hardly a shock when the company announced that the new Mercedes-AMG GT and C63 AMG S Estate would serve as ushers in the F1 circus. The two turbocharged monsters replace the old SLS AMG safety car and C63 AMG wagon medical car, which have served in one trim or another since 2010 and 2008, respectively. The biggest change for either car is, of course, the lightbar. It's been mounted atop a carbon-fiber hoop on the AMG GT that Mercedes says optimizes airflow to that big rear wing. Meanwhile, the location of the lights was confirmed via wind tunnel testing. In the cockpit, two iPads allow the AMG GT's passenger, fuel analyst Peter Tibbetts, to monitor the race's world feed while also keeping an eye on race data. The tablets stay connected via an in-car, wireless internet connection. Changes for the C63 S wagon are less extensive. It gets a lightbar and the usual signaling systems in the headlights and taillights, while the cargo compartment includes both a respirator and a defibrillator, to manage more serious medical emergencies. As with the AMG GT, the C63 is finished in F1's traditional silver safety/medical car livery. Beyond these changes, both vehicles are just as potent as those that can be purchased at dealers. Both cars feature a 4.0-liter, 510-horsepower, twin-turbocharged V8, while a seven-speed AMG Speedshift transmission dispatches the grunt with lightning-quick shifts. So equipped, the AMG GT will hit 60 in 3.8 seconds and the C63 can get there in 4.1 seconds. Check out the full gallery of both cars, decked out in their F1 liveries, available up top. Related Video: Mercedes-AMG GT S and C 63 S in action for the 2015 Formula 1® season: Maximum safety, maximum performance Affalterbach, Mar 06, 2015 Baptism of fire on the race track: The GT S and the C 63 S – the new high-performance cars from Mercedes-AMG - provide for maximum safety in the 2015 FIA Formula One World Championship™. At the first Grand Prix in Melbourne, Australia (12 to 15 March 2015) the GT S will debut on the race track as the Official Safety Car of the FIA Formula One World Championship™. As the Official Medical Car of the FIA Formula One World Championship™, the C 63 S Estate will be on hand to provide fast emergency medical care. Mercedes-AMG has been active continuously at the pinnacle of motorsport since 1996.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...