Texas 1 Owner Rx-8 Renesis Multi Side Port 4dr Coupe Loaded Sun Roof 85 Pix Vido on 2040-cars

Auto blog

Fiat 124 Abarth Spider spied, may get Alfa 4C power

We've long been excited to see, hear, and drive the car that results from the in-process Fiat-Mazda partnership. The Italian brand has had access to the excellent 2016 Mazda MX-5 Miata on which to base its own roadster, and the fruits of that labor will soon ripen. Spied here is not only the ensuing Fiat 124, but a hotter Abarth tuned version of the spider. At least, that's what we're hoping. Our spy shooters indicated that the car seen here not only sounded more aggressive than 'standard' 124 mules seen previously, but that it also accelerated away from their long lenses with a smartness. The 124 Spider is already rumored to make use of the 1.4-liter turbo I4 that makes 160 horsepower in the Fiat 500 Abarth, and this version may have a still-more-powerful engine. Another tell about the added output are the quad tailpipes in place of the lesser car's set of two. There's no hard evidence to support exactly which engine might be under the 124's hood, however. It's possible that the 1.7-liter turbo from Alfa Romeo 4C could be in play – with its 237-hp output – as the 124 was originally going to wear an Alfa badge. If that were to happen, however, the Fiat would almost certainly get a dual-clutch transmission instead of the purer manual box. In any event, more details about the car will no doubt crop up closer to the expected reveal this fall. Related Video:

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.

Mazda: Penn & Teller

Mazda turned to magic to highlight its refreshed CX-5, bringing in Las Vegas staples Penn and Teller to saw the CUV in half. The glitzy spot has a very Sin City feel to it, although considering some of the ads we've seen tonight, it's short on shock value, humor and heart-tugging imagery. Have a look, though, and let us know what you think.