04 Mazda Rx-8, 1.3l R2, Aut Trans, Sunroof, 1 Owner, No Accidents, No Reserve. on 2040-cars

Auto blog

Mazda plans to launch an EV in 2020, plug-in hybrid by 2022

Thanks to an interview Automotive News Europe conducted with Mazda president and CEO Akira Marumoto, we have more insight on Mazda's plans to lower its vehicle emissions in Europe. This will undoubtedly bring changes to the U.S. lineup, too, but The Continent sees the first fruits in part because Mazda is well over the European Union's fleet CO2 emissions target for 2021 of 95 g/km. In response to how Mazda plans to achieve the necessary reduction, Marumoto said the carmaker will launch its first EV in 2020 and have a plug-in hybrid on the road in 2021 or 2022. First, some clarification on the emissions numbers and timeline. The 95g/km figure is based on the New European Driving Cycle (NEDC) emissions schedule being phased out next year; the AN piece cites JATO Dynamics findings that Mazda Europe's fleet CO2 average is 135.2 g/km. The new Worldwide Harmonised Light Vehicle Test Procedure (WLTP) schedule comes into full effect in 2020, the fleet CO2 target under that methodology translating to 114.9 g/km. The rules dictate that 90 percent of an automaker's range needs to meet the cap number by the end of 2020, the rest of the lineup must come into compliance by the end of 2021. Failure means enormous fines. Industry analyst IHS Markit estimates "average fines for those not complying could reach ˆ624 ($707) per vehicle at the end of 2020, with a further ˆ190 ($215) increase in 2021." The penalties quickly grow so large that Fiat will reportedly pay Tesla hundreds of millions of euros to pool their fleets and avoid an even larger bill. Mazda's most popular vehicle in Europe is the CX-5 with CO2 emissions ranging from 128 g/km to 150 g/km. On top of that, for a small automaker, the size of potential fines has material effect on the R&D budgets necessary to develop the technologies that will lower emissions, and whatever EV Mazda launches in 2020 needs to sway legions of customers into purchases to be of practical use. This will be challenging. A line in the IHS Markit summary about the industry in general states, "Once in 2021 and subject to full WLTP regulatory monitoring, only a seismic shift (over the baseline) in consumer demand for BEV ('Electric-Plug-In') and PHEV ('Hybrid-Full Plug-In) will result in the full mitigation of EU28 fleet level excess emissions premiums." Mazda hooked up with Toyota and Denso in 2017 on a joint venture called EV Common Architecture Spirit Co Ltd to develop EV technology.

Mazda starts production of new MX-5 Miata in Japan

We often regard a new model as having arrived when its manufacturer reveals it for the first time. But you might argue that nothing is official until actual production gets underway. And that's just what's happened now with the new Mazda MX-5. The fourth-generation Miata was unveiled a few months ago, and now the first examples have begun to roll off the assembly line at Mazda's Ujina plant in Hiroshima. The first ones are set to stay in Japan, where the new roadster is being introduced initially. Deliveries are set to launch in June. After that, we can expect the new MX-5 to proliferate to markets around the world, including our own. To date Mazda has sold more than 950,000 of its little roadsters, making it the best-selling two-seat sports car in the world. It shouldn't be long, then, before the new model tips it past the million-unit mark. 2015/03/05 Mazda Starts Production of All-new Mazda MX-5 HIROSHIMA, Japan-Mazda Motor Corporation today began production of the all-new Mazda MX-5 two-seater lightweight sports car (known as Mazda Roadster in Japan) at Ujina Plant No.1 in Hiroshima. The first models produced are destined for the Japanese market. Sales of the all-new MX-5 will begin in Japan around June this year and interested buyers can make an appointment for pre-sale discussions through a dedicated website from noon on Friday, March 20. Following sales start in Japan, the MX-5 will be progressively rolled out to overseas markets. The MX-5 is an iconic model representing Mazda's vehicle engineering philosophy: the pursuit of driving pleasure. With production exceeding 950,000 units as of the end of January 2015, the MX-5 continues to hold the Guinness World Record for the world's best-selling two-seater sports car. In order to respond to ever increasing demands for safety features and environmental performance while maintaining the element of fun that has always defined the model, development of the fourth generation MX-5 was carried out under the motto "innovate in order to preserve". In addition to incorporating SKYACTIV TECHNOLOGY and KODO-Soul of Motion design, development focused on enhancing the senses and sensations through which people enjoy cars. Moving forward, Mazda will continue to enrich the lives of its customers through a variety of touch points including the production of high-quality vehicles, and become a brand that maintains a special bond with its customers. Related Video:

Mazda CX-5, Mazda6 and Mazda3 could stall due to software glitch

Mazda is recalling 262,220 vehicles due to a software error that could cause the engine to unexpectedly stall out. The recall affects 2018-2019 CX-5 crossovers, 2018-2019 Mazda6 sedans and 2019 Mazda3 models.  According to NHTSA recall No. 19V497000, which was filed June 27, a programming issue in the powertrain control module (PCM) on select Mazda vehicles could cause the engine to shut down. More specifically, "the software controlling the hydraulic valve clearance adjuster may operate improperly when transitioning from cylinder deactivation to full cylinder activation modes." This could potentially cause the intake valve rocker arm to come out of position and hit something else in the engine. If this occurs, the engine could misfire, the engine could lose power, and the Malfunction Indicator Light would be triggered. The recall affects 143,004 2018 CX-5s, 81,236 2019 CX-5s, 18,295 2018 Mazda6s, 2,551 2019 Mazda6s, and 17,134 Mazda3s. Some cars from those model years received the improved software at the factory and won't be affected by the recall. Although the first report of a related issue was chronicled in January 31, 2018, no injuries tied to the problems have been reported. Mazda is expected to start its recall on or before August 26, 2019, and will reprogram the PCM with improved hydraulic valve adjustment control programming for free. Contact Mazda at 1-800-222-5500, reference No. 3719F, for more information.