Mazda Rx-7 R1 Twin Turbo on 2040-cars

Auto blog

This California rally is vintage Japanese car heaven

What's so good about the future? This is what I was thinking when some folks at Mazda invited me and a handful of other journalists to join them on the second-annual Touge California. It's a rally for classic Japanese cars that covers a huge chunk of Southern California's twistier roads, where fans get to test their beloved machines. Oh, and it attracts swarms of admirers with cameras. "It is not a race. It is a vintage touring rally," said Ben Hsu, editor in chief of Japanese Nostalgic Car, and one of the coordinators of the event. "In Japan, touge most definitely refers to racing, whether timed, in touge battles, or drifting antics. Touge California was created to give drivers of Japanese classics a taste, as close as possible, of the types of roads their cars were forged on." Touge California was created to give drivers of Japanese classics a taste, as close as possible, of the types of roads their cars were forged on. We started the day on a mundane stop-and-go freeway drive from Mazda's Irvine headquarters to Escondido, me riding shotgun with my journalist co-driver in a 2016 Miata. But Mazda also brought along three heritage products on this trip – a 1985 RX-7 GSL-SE, a 1978 GLC three-door hatchback, and a 1975 REPU (rotary engined pickup) – serving as reminders of the company's history in the U.S. The group of Mazdas was joined in Escondido by many more Mazdas. And Toyotas, Hondas, Datsuns – so many 240Zs – and the odd Subaru and Mitsubishi. In total, 28 cars were at the start line. "We doubled the field this year, and made the route longer – 200 versus 120 miles," Hsu said. "We separated the cars into two run groups based on speed and a mix of makes and models." I spent the first part of the rally in the Mazda pickup to get a taste of rotary power. It was my first experience behind the wheel of a Wankel-powered vehicle, my first time driving a small Japanese truck from the '70s, and my God that thing has a lot of power. I had a few scares when I had to stand on the brakes, and I found the shift throw's immense length disconcerting – it felt like third gear engaged somewhere in front of the dashboard, with fourth somewhere in the bed. The truck was a great introduction to the rotary, however, and to '70s Japanese cars. Especially in Southern California, old Japanese cars aren't as novel to casual observers as they might be in other parts of the country.

Why is it called Mazda CX-30? Plus other questions answered

GENEVA — Mazda just introduced its latest crossover, the CX-30, and it left us raising an eyebrow. It's planned for a global release, including the United States, and it's supposed to slot between two compact crossovers that one might not think had room for another model. Plus it has a name that doesn't fit Mazda's typical nomenclature. So we thought we'd take a little time to explain some of those things, starting with the name. Mazda arrived at the CX-30 name because of a self-created problem: the Chinese Mazda CX-4. The CX-4 name would be perfect for the CX-30, since it would fall right between the CX-3 and CX-5 where it's positioned. But with the name taken, and evidently no plans to discontinue, replace, or rename that Chinese model, Mazda needed something else, and fractions and decimals weren't on the table. So appending a zero was the plan. Talking with a Mazda representative, there were hints, though no concrete confirmation, that this naming scheme could possibly spread throughout the Mazda line. There would be advantages to such a system, such as bringing the CX-30 into line with other Mazda products, but it would also provide room for other in-between models named CX-35, CX-25, etc. Now for the size. Mazda says it fits between the CX-3 and CX-5, both of which will be sold alongside it for the foreseeable future. But is it closer to one than the other? Length-wise, the CX-30 is 4.7 inches longer than the CX-3 and 5.9 inches shorter than the CX-5. It's also an inch wider than CX-3 and 1.8 inches narrower than CX-5. Interestingly, the CX-30 and CX-3 are the same height, which is 5.9 inches shorter than the CX-5. The CX-30 does have a bit more ground clearance than the CX-3, but only by a few hundredths of an inch. To add some context outside the Mazda brand, the CX-30's size also puts it on par with crossovers such as the Mitsubishi Eclipse Cross, Subaru Crosstrek and Jeep Compass. All of those are sort of in-betweeners themselves. By contrast, the CX-3 is one of the smallest subcompact crossovers and aligns more closely with a Hyundai Kona. In other words, there actually was a segment gap Mazda could fill as the CX-30 fall pretty squarely between the CX-3 and CX-5. As such, we also imagine that pricing will fall between the two. The CX-3 starts at $21,435 and the CX-5 at $25,395. So about $23,000 seems reasonable for the base Skyactiv 2.0-liter engine, and probably more for the Skyactiv-X engine.

Mazda RT24-P brings KODO style to the Rolex 24 at Daytona

In addition to its new CX-5 crossover, Mazda revealed its new racecar, the RT24-P, at the Los Angeles Auto Show. The car has been designed for the Daytona Prototype international (DPi) class in IMSA's WeatherTech SportsCar Championship and will make its racing debut at the Rolex 24 at Daytona. It was designed using Mazda's KODO design language, which the brand has so successfully applied to its road-going cars. The racer's relation to Mazda's production cars is made obvious by the small five-point grille at the tip of the RT24-P's nose. While plenty of credit needs to go to the stylists and aerodynamicists at Mazda and Multimatic, one of the companies Mazda partnered with on the car, some of the credit needs to go to IMSA's new DPi rules for 2017. The new DPi class is very similar to the LMP2 class that it competes with in the WeatherTech series, with some noteworthy differences. The DPi class allows manufacturers to create unique bodies and engine packages for one of the four chassis available. The LMP2 class requires competitors to use the chassis companies' bodies, and are restricted to one engine package. View 14 Photos As for the powertrain, the Mazda RT24-P uses a turbocharged 2.0-liter four-cylinder that puts out roughly 600 horsepower. Mazda used the same engine in its P2-class race car last season. Mazda's body and engine will ride atop a chassis developed by Riley Technologies and Multimatic. You may remember that latter company as the one that developed the awesome spool valve shocks on the Chevrolet Colorado ZR2. The RT24-P will be campaigned by Speedsource, a company that has been racing Mazdas in American endurance racing for years, including last year's P2 cars. Considering Mazda's success in making such a cool race car, we're excited to see what other manufacturers do with the extra design freedom of the DPi class. Both Chevrolet and Ford competed last year in the WeatherTech prototype class with Daytona Prototype-style cars, and Honda competed with an LMP-style racer. Depending on what other makes decide, this year's WeatherTech line-up could have some nifty designs. Related Video: Related Gallery 2017 Mazda RT24-P race car View 9 Photos News Source: Mazda, IMSAImage Credit: Live photos copyright 2016 Drew Phillips / Autoblog Motorsports LA Auto Show Mazda Racing Vehicles Videos Original Video 2016 LA Auto Show