1988 Mazda Rx-7 Convertible 2-door 1.3l on 2040-cars

Auto blog

Will Mazda sell diesel hybrids in Japan in 2016?

Could the "Zoom Zoom" automaker start making hybrids that go "glug glug glug"? Mazda, known for its fuel-efficient Skyactiv engine line, will be the first Japanese automaker to make a diesel-hybrid vehicle for Japan and Europe. According to the Yomiuri Shimbun, Mazda may start making its oil-burning hybrids as soon as 2016, and the powertrain may reach fuel efficiency levels of as much as 95 miles per gallon (one the more lenient Japanese driving cycle). That'd make such a vehicle line about 30 percent more fuel-efficient than standard diesels and about eight percent more fuel efficient that the Toyota Prius C compact hybrid (known as the Aqua in Japan). Mazda has been dismissive of hybrid and electric powertrains, instead focusing on Skyactiv technology to maximize fuel efficiency from conventional gas-powered engines. Diesel powertrains account for about half of the light-duty vehicles sold in Europe each year, while Japan's diesel sales of 76,000 vehicles last year were about three times as many as were sold there in 2012. In January, Mazda said that it would delay the introduction of its Skyactiv-D diesel engine from what was to be a spring 2014 debut. The reason was to fine-tune the engine's performance/fuel economy balance. Mazda representatives didn't immediately respond to a request for comment from AutoblogGreen about the diesel hybrids.

Next-gen Mazda6 reportedly getting RWD, straight-six it shares with Toyota

Last June, Japan's Best Car magazine laid out what we considered a whopper series of rumors about future Mazda developments. The mag said it had been speaking to a Toyota source on an unrelated matter, and found out that Mazda's work on a straight-six Skyactiv engine was predicated on that engine's use in Toyota Group vehicles, including Lexus models. Car and Driver has apparently consulted its own sources, and in a new report utters many of the same pronouncements as Best Car. The next-generation Mazda6, due around 2022, will molt out of its transverse engines on a front-driver platform, and be the first home for the longitudinally-mounted straight-six on the automaker's new rear-wheel drive "Large Architecture."  The gas-powered Skyactiv-X six-cylinder, a shade under 3 liters of displacement, will get help from a 48-volt hybrid system, and top output could hit 350 horsepower. A second straight-six will come in an oil-burning Skyactiv-D flavor, and PHEVs are certain to eventually factor into the equations. The sheetmetal around the bodywork will draw inspiration from the four-door Mazda Vision Coupe concept that debuted at the 2017 Tokyo Motor Show. Describing a scenario we can only cross our fingers for, C/D writes "there's a chance Mazda will mimic Lexus and put inline-six into both four- and two-door bodies," grabbing another unused concept as a design guide for the latter, the two-door RX Vision concept from the 2015 Tokyo Motor Show. C/D suspects the increasing cooperation between Mazda and Toyota will not only pay the bills for Mazda's sports sedan, but compel the Large Architecture to take a couple of side jobs in Toyota City. C/D writes, "Toyota may adopt the six-cylinder Skyactiv-X for the next-generation Lexus IS and RC." According to the recently leaked dealer report, the next-gen IS could be with us in 2021 as a 2022MY offering. Betting money seems to be on the sedan sticking with Toyota's TNGA platform and Lexus engines until a brand new model shows around 2026, though.

Leaked images show digital gauge cluster for Mazda3

Most everything divulged about the 2019 Mazda3 so far has focused on the trick Spark Controlled Compression Ignition (SPCCI) Skyactiv-X engine. If a series of photos posted on a Chinese website are accurate, it looks like Mazda has novel plans for the cockpit as well. The three images show a three-color, all-digital gauge cluster in two different configurations. The first configuration places a three-digit speedo in the center of a blue-ringed tachometer, with gear indicator and water temp displays on the left, fuel range calculator and what appears to be a funky clock on the right. The second configuration splits the tachometer to the left and the speedo to the right. In between them is what looks like a road surface display for automatic cruise control. Trip info lies just under the blue-banded road, while water temp, fuel gauge, gear indicator and range info line up across the bottom. A swath of empty space on the left could be where Mazda's relocated the current car's passel of warning signals. Of note: Everything around the digital gauges appears to come straight from the current Mazda3. The instrument panel surround, the steering wheel and buttons, the stalks, all of it is lifted from today's car. If the photos are what's headed our way on some trim of the 2019 Mazda3, though, they show a clean, handsome evolution of the no-nonsense cluster in the current compact hatch. Mazda's worked up a head of good press on the run-up to the Mazda3 launch for both the engine and the dynamics. We're told we'll get between 10 and 30 percent more torque from the 2.0-liter SPCCI Skyactiv-X, and about 25 percent better fuel economy compared to today's 2.0-liter Skyactiv-G. Handling-wise, the jinba ittai philosophy — horse and rider as one — has led to engineers reworking everything from tire sidewall stiffness to multi-contoured torsion elements and the mounting and shape of the seats. The hatchback's torsional stiffness climbs by 30 percent, any excess rigidity countered by 7.5 meters of "matrix resin material" applied in 16 places on the body "to absorb vibration and dissipate it as heat." The point has been to eliminate dynamic static between the driver and the road, and then to give the driver the best natural seating position to take advantage of the body's reflexes to dynamic input. At the same time, this digital gauge cluster might also give that driver something tasty to look at. Related Video: