1984 Mazda Rx-7 12a Turbo on 2040-cars

Auto blog

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.

2019 Mazda Miata officially announced with 181 horsepower

It turns out the rumors and leaks are true. The 2019 Mazda MX-5 Miata will indeed get a slight performance increase. This fall, the car's naturally aspirated 2.0-liter inline-four will make 181 horsepower and 151 pound-feet of torque. That's a 26 horsepower and 3 pound-feet bump over the 2018 model. It may not sound like a lot on paper, but consider the fact that it's a nearly 17 percent increase in power in a car that weighs just 2,332 lbs. When the current ND generation debuted a few years back, the Miata actually took a slight hit to power. It was offset by a sizable weight loss program, but it didn't stop people from making a fuss. These days, it's not often that a newer model actually loses power compared to the outgoing car. The new car now makes roughly the same power as the old turbocharged Mazdaspeed MX-5 from 2004. Peak power for the 2019 model comes at 7,000 rpm while peak torque arrives at 4,000 rpm. That's 1,000 more and 600 fewer revs respectively. The Miata's redline is now 7,500 rpm, up from 6,800. It should make the car feel more lively through the rev range and should drop the car's 0-60 mph time back under 7 seconds. The 2019 model only weighs 7-pounds more than the outgoing model, so it's essentially a non-issue. In order to get the extra juice, Mazda engineers did some significant work to the engine's internals. Piston mass has been reduced 27 grams while the connecting rods are down 41 grams. The exhaust system and inner exhaust manifold have been modified to reduce pumping losses by 30 percent. The intake and fuel injectors have been changed, too. A new dual-mass flywheel replaces the single-mass unit. This should help better manage engine vibrations and responsiveness. Lastly, the final drive ratio has been increased from 3.454 to 3.583. Other gear ratios remain unchanged. There are other minor but welcome changes for 2019. The steering wheel now telescopes, a boon for drivers with long legs. The doors are easier to open and feature revised door stops. The cupholders and seat levers have both been updated. Finally, there are new 17-inch wheels and a new brown canvas soft top. How all these changes will affect the car remain to be seen. While many people have been clamoring for more power, some of us here at Autoblog feel the Miata may lose some of its current character with such a significant shift in power and torque. Either way, we're as excited as ever to get behind the wheel. Related Video:

Mazda's rotary engine may live on as a range extender (UPDATE)

Update: We received a response from Mazda that confirmed plans for a 2019 electric car available in battery-only and range-extended models, but there was no comment on any other details. The text has been updated to reflect this. It may be time for rotary fans to start getting their hopes up a little for a return of the spinning triangle engine. Automotive News spoke with Mitsuo Hitomi, the man in charge of Mazda powertrains, who said there's a very good chance the next implementation of the rotary engine will be as an electric car range extender. The news source also suggests that such a vehicle could be just around the corner, since Akira Kyomen, Mazda's vehicle development program manager, confirmed to Automotive News that the company will have an EV out in 2019 in both pure electric and range-extended versions. We reached out to Mazda for more information, and a representative confirmed both the pure electric and range-extended models for 2019, but couldn't comment on anything else regarding those vehicles. Looking back, we have reason to believe that this really might happen. As far back as 2013, Mazda was working on a rotary-engine range-extended electric car in the form of the Mazda2 RE Range Extender. It had a total range of 250 miles, half of which came from its battery, the other half from a 330 cc rotary engine generator fueled by a 2.6-gallon gas tank. More recently, Mazda has also teased rotary power with the RX-Vision concept at the 2015 Tokyo Motor Show and another rumored rotary concept at this year's show, which could be the design concept teased recently. But most convincing is the patent we found from Mazda that described a range-extended electric car that would specifically use a rotary engine. The powertrain layout looks just like the one used in that Mazda2 concept. There's also the fact that, as we've previously pointed out, and as Hitomi mentioned to Automotive News, the rotary could be a good range-extender due to its compact size and smoothness. Of course it also isn't known for being the most efficient engine, but if it isn't required to provide all the forward propulsion, it could be made small enough that it's frugal, and the added space and weight savings would be important for making the vehicle more practical, adding more batteries, or simply keeping the car lighter. This news might not excite rotary die-hards who have been waiting for an RX-7 and RX-8 successor, but they shouldn't quite abandon hope yet.