1982 Mazda Rx-7 S 2d Coupe on 2040-cars

Auto blog

2019 Mazda CX-5 to get 2.5-liter turbo and revised G-Vectoring

The 2019 Mazda CX-5 is getting Mazda's 2.5-liter turbocharged four-cylinder engine if this supposed internal document from Reddit is correct. The user claims a salesperson showed him the document in question. In addition to the availability of the turbo engine, Apple CarPlay and Android Auto appear to be added onto every trim level. Do take note that the document says it's from Mazda Canada at the bottom, so that's why the trim levels don't have the same names as they do in the U.S. Another interesting mention in there is G-Vectoring Control Plus. We've had Mazda's G-Vectoring Control technology for a little while, but never has a car come out with the Plus moniker on there. Our best bet is Mazda has revised its original G-Vectoring system for 2019; we'll have to wait for official information to see what exactly changed though. At the top of the page Mazda lists "substantial visual changes to the interior" as one of the highlights. The biggest change we can find related to that is a seven-inch LCD display added to the gauge cluster on what would equate to the Grand Touring trim in the U.S. At least Canada — and maybe we too — seems to be getting a fourth trim level called "Signature." This will probably consist of more expensive materials used throughout and maybe a few bonus tech features over the Grand Touring. The page shared looks plenty legitimate, but it's still best to maintain some healthy skepticism. It's also from Canada, so there could be some slight variations between how those cars are equipped versus those coming stateside. We're excited to see the 2.5-liter turbo in the smaller CX-5, though. It should give that car the extra punch it needs to fend off faster rivals in the ever-expanding crossover segment. Featured video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Mazda CX-5 diesel gets EPA fuel economy ratings

Mazda has been promising that it will bring the Skyactiv-D diesel engine to the United States pretty much since the last Mazda6 redesign for the 2014 model year. And even in the wake of delay after delay, the company has insisted it will happen. Well, it looks like we may not be far from the fulfillment of this promise, since the EPA and DOT's FuelEconomy.gov website now has numbers for the diesel-powered Mazda CX-5. What's surprising, besides the existence of hard numbers, is that those numbers aren't actually that big of an improvement over the gas engine. In fact, highway numbers are the same as the gasoline versions. The front-drive CX-5 diesel gets 31 mpg on the highway, and the all-wheel-drive one gets 30 on the highway. The diesel does see improvements in the city. The front-drive model gets 28 mpg versus 25 for the gas equivalent. The all-wheel-drive model gets 27 mpg rather than 24 for the gasoline version. Also concerning is the fact that the CX-5 diesel isn't the only diesel in the segment. The Chevy Equinox is available with a diesel, too, and while city mpg is about the same, it can hit 38 mpg with all-wheel-drive and 39 with front-drive on the highway. With this in mind, Mazda will probably market the engine as more of a performance upgrade, and maybe something with a bit of extra towing capacity. This is because the engine is expected to make a bit over 170 horsepower and 310 pound-feet of torque. The power number is a smidge below that of the 187 from the 2.5-liter naturally aspirated gas engine, but the torque number is much higher than the gas engine's 186 pound-feet. We've also reached out to Mazda for comment on this development. A representative offered no further comment beyond the company staying committed to diesels. Related Video:

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video: