Hard Top on 2040-cars

Auto blog

2018 Mazda6 2.5T First Drive Review | Smooth operator

ANN ARBOR, Mich. — We like driving Mazdas, even if it's not the Miata, because they've always got an underpinning spirit of enthusiasm that makes even the slowest Mazda3 or the heaviest CX-9 at least somewhat entertaining. So when Mazda announced the refresh of the Mazda6 for the 2018 model year, we perked up. A new engine and some other refinements are exciting, sure, but maybe more important is the redesigned interior. Mazda's interiors haven't always impressed, but over the years they've improved — and this generation of the Mazda6 up until now has been an example of that improvement. Fortunately, because they're fun to drive, we've been able to overlook some interior foibles. Much attention was paid to noise, vibration and harshness (NVH). The company says it made 70 changes, from tires to suspension geometry to sound deadening materials, in order to make the car more comfortable going down the road, while maintaining its fun driving dynamics, and none of them include active noise cancellation. Of course, the turbocharged version of the 2.5-liter Skyactiv-G engine should help with the fun. We got behind the wheel of the 2018 Mazda6 2.5T, in top-tier Signature trim, to drive it on some of our favorite Michigan roads. We were especially interested in figuring out whether the interior lived up to the hype, and whether the other refinements would dull the car's driving dynamics. Mazda seems like it's laying the groundwork to pushing its brand upmarket. With exterior design nailed down — the Mazda6 is a handsome sedan, and receives minor tweaks for 2018 to make it more so. In fact, this car is laden with the automotive equivalent of sex appeal (which some would just call sex appeal). It's absolutely magnetic. If you're not feeling it, check it out from a different angle; it'll change your mind. As we mentioned, the company has turned its attention to the experience inside the car, and in addition to new materials inside, it has a new top-tier Signature trim level, which Mazda refers to as "aspirational" — but at $35,640, it's not exactly out of reach. It's rare that we get into any sub-$40k car and start caressing the interior with both eyes and fingertips. It happens rarely – the last one was the Honda Clarity PHEV, which was a real surprise. The 2018 Mazda6 marks the second occasion. Both times we were taken completely off guard by it. The Mazda, though, has the exterior charm to match. The new seats are fantastic, too.

Yes, the Mazda BT-50 pickup is real. No, you can't get one.

Mazda exited America's pickup segment when it deep-sixed the Ford Ranger-based B-Series after the 2009 model year, but it remains committed to the body style overseas. The third-generation BT-50 introduced online wears an unusually stylish design for a global truck, while its interior looks and feels more car-like than before. The BT-50 is based on the Isuzu D-Max, but the familiar shield-shaped grille hides the common DNA well. Horizontal slats and a thick chrome frame create a visual link between the pickup and members of Mazda's line of sedans and crossovers, while stylists gave the rear end more utilitarian-looking lines characterized by vertical lights. The variant depicted in Mazda's images is an upmarket trim built for users who need a rugged daily driver, and more basic versions that feel at home on a construction site will ship will inevitably look a lot cheaper. It measures 208 inches long, 74 inches wide, and 70 inches tall when buyers select the double-cab model and order four-wheel drive. These figures give it a footprint almost identical to the four-door Ranger's. Inside, the BT-50 shares some parts with the D-Max, including its 9.0-inch touchscreen and its HVAC controls. Motorists in global markets are increasingly using pickups as daily drivers, so Mazda chased this trend by adding more technology and safety features to the BT-50. Those willing to climb the trim hierarchy are rewarded with conveniences like an eight-speaker stereo, digital gauges, automatic headlights, parking sensors on both ends, and dual-zone climate control, among other features. Mazda wants to peg its truck a little bit higher than Isuzu's. The only engine detailed by the firm is a 3.0-liter four-cylinder turbodiesel built by Isuzu and tuned to deliver 190 horsepower at 3,600 rpm and 332 pound-feet of torque from 1,600 to 2,600 rpm. Rear-wheel drive and a six-speed manual transmission come standard, and motorists can pay extra for four-wheel drive, a six-speed automatic, or both. It's reasonable to assume a smaller, entry-level turbodiesel will join the range later on. With the 3.0-liter, the BT-50 can haul 2,347 pounds, and its towing capacity checks in at 7,716 pounds. That's more than enough to tow an enclosed trailer, your stripped-out Miata, an extra set of slicks, and a boxful of tools. Making your dreams of Mazda-Mazda towing come true will require moving far overseas, because the Japanese company isn't planning on returning to America's pickup segment.

Junkyard Gem: 1985 Mazda 626 Sedan

Mazda began selling cars in the United States all the way back in the late 1960s, with the Cosmo Sport 110S, and many interesting(ly strange) Wankel-powered machines followed, but they eventually gave way to much more conventional piston-powered cars such as the the original 626 that the ex-cork-making company from Hiroshima offered here starting in 1979. That car didn't sell so well, though it looked good and boasted build quality as good as the better-known Japanese brands. Starting with the 1983 model year, a new 626 with front-wheel-drive appeared here, with production continuing through 1987. That car did a better job at luring buyers away from Nissan and Toyota showrooms, but examples are nearly nonexistent today. Here's one of those cars, found in a Colorado yard overseen by Pikes Peak. Just as the GLC became the 323, which became the Mazda3 (after first dabbling with the Protege name), the 626 eventually became the Mazda6 (with coupes badged as MX-6s or Ford Probes for a while in the late 1980s through middle 1990s). The last year for the 626 name here was 2002. This one made it well past the 200,000-mile mark, which was serious stuff for a mid-1980s car (yes, I've found some Toyotas of the same era that doubled that figure and a couple of Mercedes-Benzes that tripled it). The 2.0-liter straight-four in the 1985 626 made 84 horsepower. Not great, but good enough for a 2,500-pound car in that period. Once BMW started adding the "i" to the designation of fuel-injected cars during the late 1970s, everybody else jumped on board the moment they ditched the carburetor. The 626 and subsequent Mazda6 held onto the manual transmission all the way until the 2018 model year, though finding a 6 from the last decade with three pedals in North America is an unusual happenstance. This car even has the optional air conditioning, something that was still considered a rich-people-only luxury by a large swathe of the American car-buying public in 1985. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Do you think the only way to get into a serious road car is to empty your bank account and buy something from the Black Forest? Not so, according to James Garner! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In its homeland, this car was pitched as highly opulent. This content is hosted by a third party.