2020 Mazda Mx-5 Miata Grand Touring on 2040-cars

Auto blog

Will the Mazda2 be offered as a PHEV with a rotary engine range extender?

Every few months, it seems a rumor crops up about plans from Mazda to revive the rotary engine. Last November, its CEO said the only way another one could happen is if the project was profitable, and then a month later the automaker showed off the Mazda2 RE Range Extender with a 330cc Wankel engine mounted in the rear. Now, Australian auto site Motoring reports that the PHEV may actually make production in the next-gen Mazda2 sometime after it's initial launch.
Martin Benders, managing director of Mazda in Australia, spoke to Motoring about the company's future with hybrids and basically reiterated what the CEO said last year. The Japanese automaker only plans to offer electrified powertrains in places where they can sell in sufficient numbers to be profitable, like Japan.
Mazda has been playing with the rotary range-extender idea for years. In the RE prototype, the engine was exclusively used to charge the lithium-ion batteries when they were running low, and a 100-horsepower electric motor provided all of the propulsion. It gave the little hatch an estimated range of about 250 miles. The company reportedly took inspiration from its Skyactiv engines to make the Wankel have lower friction and a lighter weight.

2019 Mazda CX-5 turbo model seemingly confirmed, doesn't come cheap

We reported last month on some leaked documents that announced the 2019 Mazda CX-5 would get the turbocharged 2.5-liter four-cylinder as an option, and it's looking even more official now that additional documents have appeared on Reddit. The new information comes from a "Product Information Bulletin" that not only confirms the engine's availability but reveals pricing, trims and feature sets for the new model year. As it turns out, the turbo CX-5 won't be cheap. The base price for a CX-5 with that engine will be $35,865 with destination. That's about $5,500 more than the cheapest turbocharged Mazda6. There are a couple of reasons for this. The turbo engine will only be available on two new high-end trims for the CX-5, Grand Touring Reserve and Signature. Both of those trims bring a variety of high-end features and options with them. It can also only be paired with all-wheel drive. The Mazda6 turbo engine is available on the slightly lower Grand Touring trim and is only paired to a front-drive drivetrain. Conspicuously absent from the 2019 documentation though is the elusive Skyactiv-D diesel engine. This is strange, since the engine has been rated by the EPA, so it's presumably ready for introduction to the U.S. market. We'll be curious to learn that engine's fate. We could see the turbo gas engine threatening the diesel's U.S. introduction, since it delivers the same amount of torque as the diesel with more horsepower. Plus the diesel didn't get amazing EPA numbers. But that's just speculation on our part, and it's entirely possible the diesel will still come here. The rest of the CX-5 lineup sees some welcome upgrades, too. The infotainment on CX-5s starting with the second-lowest Touring model will get standard Apple CarPlay and Android Auto compatibility. All models also will receive G-Vectoring Plus. The feature, along with the turbo engine option, was announced for the Japanese CX-5 recently. What this system adds is a little bit of braking force to the outside wheel as the driver winds the wheel back to a straight position when exiting a corner or completing a lane-change. The idea is that it helps make the car more stable when straightening out after a turn. Also, although the turbo CX-5 models will be rather pricey, the other CX-5 models won't change much in price. The base Sport trim starts at $200 more than the 2018, the Touring model increases just $100, and the Grand Touring goes up by $400.

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.