2012 Mazda Miata Grand Touring on 2040-cars

Auto blog

Mazda RX-Vision GT3 concept slinks into Gran Turismo Sport next year

The World Final of the FIA World Tour in Gran Turismo Sport just went down in Monaco, and Mazda was there with a couple of big announcements. The first is that the Hiroshima-based automaker will become an official video game partner next year, 2020 also happening to be Mazda's centenary year. The second reveal was a sketch of the Mazda RX-Vision GT3 Concept, a GT3-class racer based on the RX-Vision Concept shown at the 2015 Tokyo Motor Show. Game creator Kazunori Yamauchi and Mazda's North American design chief Julien Mountousse wouldn't get into details, such as how close the final car would look to the drawing or whether there'd be a rotary engine under the hood. Yamauchi would only say Polyphony Digital is modeling the car right now, and Montousse added that designers wanted the Vision GT3 to be a car players really wanted to drive. As much of a looker as the race car is, it's clear some changes will be in order; the front fenders, roof, and rear wing are nearly on the same plane. The brunt of aero accessorizing happens down low, a massive front splitter leading to extended side sills with vertical planes, and what must be a massive rear diffuser with an even larger set of vertical planes. It's hard to tell by the drawing, but it looks like the rear wing supports angle out from the body to merge with the end plates. When the RX-Vision GT3 shows up to contest the 2020 FIA-certified championships in GT Sport, it will join the Atenza Gr.3 as Mazda's only GT3-class car in the game — the Atenza effectively a near copy of the Speed Source Mazda6 that raced in the U.S. Grand-Am series until a couple of season ago, but with four doors instead of two, and a gas engine instead of diesel. Mazda didn't qualify for the GT Sport Manufacturer's Cup this year, they'll be hoping their team can change that next year with the RX-Vision GT3 since, as Montousse said, "That car has all the Mazda spirit in it." There will be more coming from Mazda in GT Sport as well. Word is that the official partnership won't stop at a single new car, and Yamauchi remarked on the partnership, "I think we can keep our expectations high for next year." Fast forward to 17:50 in the video to see the sketch presented, or roll back a bit to 14:00 to listen to comments from Mazda global head of design Ikuo Maeda.

Driving a $500 junker in a 500-mile off-road rally race | 'The List' #0500

Jessi and Patrick have done some insane rally races on "The List," but in an effort to continually out-do themselves, this might be the craziest yet. It's called the Gambler 500, and the idea is that 2,000-plus participants take $500 cars and drive them 500 miles across Oregon, mostly off-road. It's a maniacal mishmash of cars with not enough doors, too many doors, airplane wings strapped to the tops, graffiti'd cartoons on the hoods, stuffed animals hanging out the windows — you get the idea. Our hosts start the race with an absolutely epic Mazda Miata sitting atop super swampers. It didn't have a top, but have no fear because it had a roll cage, so ... that's better? Unfortunately though, they didn't have time to customize the car fully to their liking before the race, so the first stop after the starting gun was naturally a garage sale for some knickknacks to give the car a little more flair. One of the defining aspects of the Gambler 500 is having the most obnoxious, bonkers car possible, and the old Miata needed a bit of a kick in the ass. Thankfully, the crew found the largest teddy bear in existence, strapped that bad boy to the roll cage, and they were on their way. There are a few routes you can choose to take in the Gambler 500, and our crew chose the most challenging, called "The Devil's Butthole." A hilarious name for an outrageously fun route, it's definitely not one that many Miatas have likely tackled. And therein lies the gamble: Will they make it to the end? As always, you'll have to watch the episode above to find out. If you liked the episode, don't forget to subscribe to our YouTube page and like our Facebook page for more exclusive content from "The List" and if you're interested in learning more about the Gambler 500 or even participating in the event, check out their official website or follow them on Facebook! Click here to find more episodes of "The List" Click here to learn more about our hosts, Jessi and Patrick Auto News Celebrities Weird Car News Mazda Convertible Special and Limited Editions The List Videos Original Video jessi combs patrick mcintyre

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.