2006 Mazda on 2040-cars

Auto blog

Junkyard Gem: 1991 Mercury Capri

Ford has gotten a lot of use out of the Capri name in the United States. First, there was the Lincoln Capri in the 1950s, followed by the Ford Capri Mk1 (which was sold by Mercury dealers in the USA but never actually badged as a Mercury). Then came the 1979-1986 Mercury Capri, built on the very successful Fox Platform and essentially a clone of the Mustang. Finally, in 1991, the Australian Ford Capri came to the United States. Here is an example of this rare car that I spotted in a Northern California self-service yard not long ago. Mechanically speaking, the 1991-1994 Capri was a Mazda 323 under the skin, complete with a member of the same B-series engine family that went into such cars as the Miata and Ford Escort. So, for a few years in the early 1990s, car shoppers who wanted a sporty Mazda convertible could choose between a Miata and a Capri. The Capri had front-wheel-drive, but could be had with factory turbocharging. These cars were reliable and fun, but had a tough time competing with the Miata in the showroom battles. You'll see the occasional example now and then, but most of the 1991-1994 Capris have met the same fate that awaits this one. Related Video:

Mazda details diesel prototype at Daytona test

Diesel has without a doubt become the dominant fuel in the modern era of endurance racing. The 24 Hours of Le Mans has been won under diesel power for the past eight years running, as has every race in the FIA World Endurance Championship since its inauguration in 2012. Yet there will only be one diesel prototype entered in the top tier of the new Tudor United SportsCar Championship this year, and it belongs to Mazda.
The last Japanese manufacturer to win at Le Mans outright, Mazda has been gradually working its way back up the endurance racing ladder once again, following the example set by Audi with diesel power. Last year it campaigned a competition-spec Mazda6 Skyactiv-D in the GX class of the Grand-Am series, but rather than simply port over the existing racer into the new series, it's fielding a new prototype instead, just as it promised a couple of months ago. And now that prototype has hit the track for the first time, prompting Mazda to release its basic specs for the first time.
Tentatively referred to simply as the 2014 Mazda Prototype, the purpose-built racecar is testing this weekend in the Roar Before the 24, the official test session at Daytona that kicks off the racing season. It packs a 2.2-liter SkyActiv-D engine that's based heavily on the production version but tuned to produce 450 horsepower and 580 pound-feet of torque in race trim. Power is channeled through a six-speed sequential transmission from Xtrac, carbon brakes from AP and 18-inch racing slicks from Continental. With the Daytona-spec aero setup, it'll top out at around 186 miles per hour.

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.