2004 Mazda Mx-5 Miata on 2040-cars

Auto blog

2019 Mazda CX-5 Turbo First Drive Review | Two-row crossover perfection

Listen: If you're shopping for a crossover, and by all accounts most Americans are, there is no better option on the market than the 2019 Mazda CX-5. When we test drove the all-new 2017 CX-5, we were astounded by its marked improvements over the already-great previous generation. We noted then its biggest drawback was its average 187 horsepower. The CX-5 didn't feel slow, and it certainly made up for it in other ways, like by delivering superior road-hugging abilities. But, it was probably enough to turn off buyers who do their shopping by analyzing spec sheets. For 2019, Mazda addressed that exact issue with a vengeance. With an all-new 2.5-liter SkyActiv Turbo good for 250 horsepower, the CX-5 not only leapfrogs bestselling rivals like the Honda CR-V and Toyota RAV4, but lands squarely in the realm of luxury stalwarts such as the Audi Q5 and BMW X3. When we drove the 2017 CX-5, we likened the handling to that of a Porsche Macan. Now it has the power to match. Among its direct competition, only the 2019 Toyota RAV4 breaks the 200-horsepower mark, ringing in at 203 (and the Hybrid makes an even more impressive 219 ponies), while the Honda CR-V, Subaru Forester and VW Tiguan all sit between 180 and 190. Now, to get the full herd you must fill the tank with 93 octane premium, but if you don't mind leaving a few ponies in the stable you can pump 87 octane for a slight dip to 227 horsepower. The engine adjusts with no ill effects. Even better, torque stays the same no matter what, and the stump-pulling 310 pound-feet of torque comes quick at just 2,000 rpm. The SkyActiv turbo is full of clever engineering tricks, too. There's an exhaust port restrictor, for instance, a narrower channel used only at low engine speeds. Mazda engineer Dave Coleman likened it to a thumb over a firehose, making more exhaust pressure at idle to spool up the turbo, and thus delivering more oomph when you take off from a standstill. Mazdafarians will recognize the mill as the same one that debuted on the 2018 Mazda6. It powers the CX-9 too, Mazda's highly acclaimed three-row crossover. The 3,825-pound CX-5 has 558 fewer pounds to shuffle around than its larger stablemate, making it downright snappy. However, that extra pep does come with a fuel economy penalty, 22 city and 27 highway mpg versus the naturally aspirated version's 24 city and 30 highway mpg.

Mazda CX-30 Luggage Test | How much cargo space?

The Mazda CX-30 is pretty much a lifted Mazda3 hatchback. Same platform, awfully similar dimensions, and the interior's a spitting image (if not identical). Ditto cargo capacity. On paper, the two have virtually the same amount of space behind their raised back seats, with the CX-30 at 20.2 cubic-feet and the 3 with just a teensy less at 20.1.  Now, before I go any further, let's see how much that 20.1 cubic-feet relates to in the Mazda3. I wasn't yet doing this test format back then, hence the video.  For reference, both tests used my standard luggage selection of two midsize roller suitcases that would need to be checked in at the airport (26 inches long, 16 wide, 11 deep), two roll-aboard suitcases that just barely fit in the overhead (24L x 15W x 10D), and one smaller roll-aboard that fits easily (23L x 15W x 10D). The bag of baseballs shown in the video is slightly smaller than my new small-bag go-to, my wife's fancy blue overnight bag (21L x 12W x 12D). So, the mark to beat is therefore all the bags minus the smallest roller.  Here is what 20.2 cubic feet looks like in the CX-30. To move beyond the Mazda3 comparison, that figure is in keeping with the CX-30's niche placement between subcompact (the teens) and compact SUVs (upper 20s to upper 30s). The Mazda CX-5 has 30.9 cubic-feet.  Now, typically, I start off by seeing how much I can fit inside with the cargo cover in place. Sadly, this particular CX-30's cargo cover is missing. We'll just have to hope it doesn't rob the CX-30 of as much space as the CX-5's does.  First off, it's immediately noticed that the CX-30's cargo area is not as long as the 3 hatchback's. The largest bag just barely squeezed inside, whereas there was some room to spare in the 3. Now, let's keep loading.  Whattya know? All of the roller bags fit inside. That includes the smallest one, which didn't fit in the 3, fitting atop the stack with perhaps 30% of it over the back seat line. Now, I could've done the same Tetris stack in the 3, but I'm virtually certain the hatch wouldn't have closed. Advantage, then, to the CX-30 and its extra height.  And surprise, the fancy bag also fits. Technically. It robs rear visibility, is pretty far above the seat line and it just barely fits under the back light. If it was filled, I have my doubts about its inclusion. Nevertheless, with or without it, there's still a bit more space on the right side for that bag of baseballs.  Now let's discuss the power liftgate.

Mazda RT24-P brings KODO style to the Rolex 24 at Daytona

In addition to its new CX-5 crossover, Mazda revealed its new racecar, the RT24-P, at the Los Angeles Auto Show. The car has been designed for the Daytona Prototype international (DPi) class in IMSA's WeatherTech SportsCar Championship and will make its racing debut at the Rolex 24 at Daytona. It was designed using Mazda's KODO design language, which the brand has so successfully applied to its road-going cars. The racer's relation to Mazda's production cars is made obvious by the small five-point grille at the tip of the RT24-P's nose. While plenty of credit needs to go to the stylists and aerodynamicists at Mazda and Multimatic, one of the companies Mazda partnered with on the car, some of the credit needs to go to IMSA's new DPi rules for 2017. The new DPi class is very similar to the LMP2 class that it competes with in the WeatherTech series, with some noteworthy differences. The DPi class allows manufacturers to create unique bodies and engine packages for one of the four chassis available. The LMP2 class requires competitors to use the chassis companies' bodies, and are restricted to one engine package. View 14 Photos As for the powertrain, the Mazda RT24-P uses a turbocharged 2.0-liter four-cylinder that puts out roughly 600 horsepower. Mazda used the same engine in its P2-class race car last season. Mazda's body and engine will ride atop a chassis developed by Riley Technologies and Multimatic. You may remember that latter company as the one that developed the awesome spool valve shocks on the Chevrolet Colorado ZR2. The RT24-P will be campaigned by Speedsource, a company that has been racing Mazdas in American endurance racing for years, including last year's P2 cars. Considering Mazda's success in making such a cool race car, we're excited to see what other manufacturers do with the extra design freedom of the DPi class. Both Chevrolet and Ford competed last year in the WeatherTech prototype class with Daytona Prototype-style cars, and Honda competed with an LMP-style racer. Depending on what other makes decide, this year's WeatherTech line-up could have some nifty designs. Related Video: Related Gallery 2017 Mazda RT24-P race car View 9 Photos News Source: Mazda, IMSAImage Credit: Live photos copyright 2016 Drew Phillips / Autoblog Motorsports LA Auto Show Mazda Racing Vehicles Videos Original Video 2016 LA Auto Show