2003 Miata Ls 5 Speed With Only 47,000 Miles!! Leather!! on 2040-cars

Auto blog

2019 Mazda CX-3 crossover updated with a tad more power and refinement

NEW YORK — Mazda's smallest vehicle, the CX-3 subcompact crossover, is getting a refresh for the 2019 model year. Visually, you'd be hard-pressed to tell what changed, and that's because not much did. The grille now has slats that are grouped in pairs, and the rear taillights have been redesigned. But there are a number of changes aside from visuals that separate this model from the 2018. Under the hood is still a 2.0-liter naturally aspirated four-cylinder engine. It picks up two more horsepower and pound-feet of torque for totals of 148 for each, though Mazda says that it also picks up torque across more of the rev band and gets better fuel economy. Mazda didn't have official mileage numbers, though. The CX-3 will also now come with the G-Vectoring Control system that helps improve turn-in by reducing torque and shifting weight forward. The steering and suspension have been slightly retuned, and the tires developed to better absorb bumps. Deeper inside the CX-3, several changes should make the driving experience more calm and refined. These include thicker door panels and rear door glass to make things quieter. The seats are now wider with redesigned foam cushions for greater comfort. A new integrated armrest in the center console and one in the rear seats with cup holders help the same cause. Mazda will also add faux suede trim to the cabins of CX-3s for a more premium feel. Pricing hasn't been announced for the new CX-3, but the little crossover will go on sale in late spring. So expect pricing to come soon. Fuel economy numbers will likely be available soon, too. Related Video:

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7

Mazda still really wants to bring diesels to America

Mazda's Skyactiv program has delivered much of what it promised for the brand's latest crop of products, namely great fuel economy and excellent driving dynamics. However, the Skyactiv diesel engine has yet to reach our shores. It's been promised ever since the new Mazda6 showed up here for the 2014 model year. According to a new report from Automotive News, Mazda's CEO Masamichi Kogai said that the Mazda Skyactiv D diesel powertrain is still set to make an American appearance. He told Automotive News that there is an internal timeline to get it to the States, and while he didn't reveal the timeline, he said he wants it to come here before he steps down as CEO. The powertrain is offered elsewhere, so it fits in the company's current vehicles, but the US has specific regulatory hurdles, and the engine's extra cost has to make sense from a sales and volume perspective. We doubt VW's diesel scandal helped the engine's sales pitch, either. Automotive News also reports that the next generation of Skyactiv designs and engines are also on their way and will advance and improve on the current generation's strengths. Engineers revealed to Automotive News that they expect a 30 percent improvement in efficiency and are developing an engine with the sky-high compression ratio of 18:1. This impressive ratio could be a further indication of Mazda's pursuit of homogenous charge compression ignition (HCCI) engines. Mazda has had plenty of success with its strategy of making very efficient internal-combustion engines, but there are some concerns that the company can only improve so much. The main worry comes from the company's lack of investment in hybrid and electric powertrains. Even Mazda's North American CEO Masahiro Moro expressed concern about meeting a 54.5 mpg mandate for 2025. That mandate will no longer take effect, but increasing fuel economy requirements will always be an issue. Related Video: