2003 Mazda Mx-5 Miata, 6 Speed Manual Transmission, Very Nice! on 2040-cars

Auto blog

2016 Mazda MX-5 Miata first engine shot revealed

We've dug deep for just about every scrap of 2016 Mazda MX-5 Miata info available out of the car's California reveal celebration, but powertrain particulars have been especially hard to come by. While we still don't have engine specifications, the folks over at Autoweek have scored a nice scoop - the first underhood photos of one of the display cars.
In the image above, the ND-generation Miata is clearly shown to be powered by a Skyactiv inline four-cylinder, as expected, but its displacement remains unclear. The engine is most likely either the 2.0-liter Skyactiv-G engine offered in low-end Mazda3 and CX-5 models or the 2.5-liter Skyactiv-G found in those same vehicles' upper trims. In those iterations, the 2.0-liter generates 155 horsepower and 154 pound-feet of torque, while the larger-displacement engine nets out at 184 hp and 185 lb-ft. There is no sign of a turbocharger, a feature rumored to be fitted to at least one test mule. There has also been previous rumors of a 1.5-liter Skyactiv engine, possibly for overseas markets.
The 2.0-liter strikes us as the most likely scenario, particularly as Mazda has worked diligently to save every gram in the new car, dropping a pledged 100 kilograms (220 pounds) over the current model, even while adding content. It's entirely possible that the alleged turbo car was, in fact, a mule for the Miata's Alfa Romeo sister car, which is expected to have a wholly different powertrain. Or it could simply be a second engine option for an eventual Mazdaspeed variant, perhaps.

Mazda explains the thinking behind the MX-30's small battery pack

Mazda's first production-bound electric car, the MX-30, relies on a 35.5-kilowatt-hour lithium-ion battery pack for power. That's relatively small, but the Japanese firm argued it's exactly what the model needs to let motorists drive electric while keeping their environmental footprint in check. Christian Schultze, head of Mazda's European research and development center, told Automotive News Europe the MX-30's battery is responsibly-sized. He explained engineers took a variety of factors into account when debating kilowatt-hours, including how much energy is required to build the pack, how much electricity is needed for a full charge, and the environmental impact of replacing the battery, which Mazda expects could be necessary after the MX-30 has covered about 100,000 miles. Sticking with a smaller pack yields total CO2 emissions on par with a turbodiesel-powered Mazda3. In contrast, using a 95-kilowatt-hour battery (which is close to what Tesla's bigger models use) would have increased the MX-30's life-long CO2 output considerably by requiring more energy to build, and needing far more electricity to achieve a 100% charge. We're not quite sure that math or battery longevity assumption hold up under scrutiny. In any case, small is the direction Mazda decided to go. The trade-off is that the MX-30 (pictured) is expected to drive for about 124 miles between charges, and that figure was achieved on the hugely optimistic WLTP testing cycle; real-world mileage will be lower. That's hardly a jaw-dropping number, and the crossover doesn't qualify for the coveted long-range label, but Schultze told British magazine Autocar it's more than enough to cover the daily transportation requirements of the average European motorist, which stands at a total of 31 miles. That's significant, because Europe will be one of the MX-30's key markets. Deliveries are scheduled to begin in early 2021. Mazda hasn't announced whether it will sell the MX-30 in the United States, or if it will wait until it has a longer-range electric car to enter the segment.

Watch what happens inside a rotary engine

Since it looks like Mazda may very well revive the Wankel rotary engine as a range extender for electric cars, there's no better time to become reacquainted with the quirky internal-combustion engine. And there's hardly a better way to become reacquainted than by peering into a running rotary engine, which you can do with the video above. The video comes to us from the YouTube channel Warped Perception. The channel has already shown what happens inside a conventional internal-combustion piston engine by putting a clear cylinder head on top of a flathead engine. This new video shows off the rotary engine by adding a clear side to a tiny model-airplane engine, something that we weren't aware existed and are glad to know about now. Despite the tiny size, the engine is functionally almost exactly like the bigger versions you'll find in Mazdas from about 1967 to 2012. It has intake and exhaust ports on the edges of the rotor housing, and the triangular rotor swings about in a peanut-shaped housing. For maximum effect, jump to right around the 7:40 timestamp. This is the point at which a bit of acetylene is added to the air-fuel mix for a brighter flame. It's at this point that you can really see when the mixture combusts and how the pressure of the flame pushes the rotor to produce rotational motion. Each stage of the video does slow things down to make everything as clear as possible. Even if you already knew how rotary engines worked, it's still fascinating to watch, first because it's something you don't get to see usually, and also because of the engine's elegant simplicity. Related Video: Image Credit: YouTube / Warped Perception Weird Car News Mazda Technology Videos rotary rotary engine