2003 Mazda Miata Ls Convertible 2-door 1.8l on 2040-cars

Auto blog

Alfa Romeo takes Spider in-house, Mazda-Fiat roadster partnership not dead

It's officially off. Following a report in March of this year that the marriage of Mazda and Alfa Romeo to produce a MX-5-based Spider was in trouble, the Italians have confirmed that it will take development in-house. "As far as the Spider goes, the final version is of course no longer the two-seater FCA co-developed with Mazda but a derivative of Project Giorgio," Maserati and Alfa Romeo brand boss Harald Wester told Car. For those not in the know, Project Giorgio is Alfa's codename for the rear-drive platform that will underpin the next-generation Spider, not to mention the replacement for the 159 sedan and a few other products. All is not lost for the Japanese-Italian partnership, though. "The Far East import will probably find a new home with Fiat-Abarth," Wester told Car. Yes, you read that correctly, Mazda is still working with FCA, and the result will eventually end up with Abarth's scorpion badge. If anything, we're more excited over this news than the idea of an Alfa MX-5. But we want to know what you think – would you rather Alfa build a new Spider on the Miata's bones, or does an MX-5 Abarth sound like more fun? Have your say in Comments.

Mazda will have a new rotary concept at Tokyo show, trying to bring it to production

Despite ending production of the rotary engine in 2012, Mazda has repeatedly insisted that it's still working on rotary engine tech, and it has continued to tease a potential future rotary car with concepts, the latest of which was the RX-Vision. The company even continues to file patents on rotary tech. It seems the company is continuing this pattern, since the vice president for Mazda's European R&D center told Auto Express that it has another rotary concept ready for this October's Tokyo Motor Show. According to Auto Express, the car expands on the groundwork laid by the RX-Vision concept. In addition to revealing the existence of the concept, the executive also reiterated the fact that there's still a team in Mazda working on the rotary engine, and people are still trying to make a business case for a new rotary sports car. Auto Express expects a production car could come in 2020. The news outlet also asked if the hypothetical car would be hybridized, and the Mazda executive didn't give much of an answer beyond it being possible, though he would prefer a purely rotary-powered car. We at Autoblog think a hybrid rotary of some sort would make the most sense. It would make for an impressive halo vehicle that could be used to promote future Mazda hybrids. This would also help with the business case side of things. An electric motor, or motors, would be highly complementary to the rotary engine as well. Electric motors produce oodles of torque from down low, which rotaries don't, and the rotary engine's high-rpm horsepower would compensate for the electric motors when they've started running out of power. Not only that, but using a hybrid powertrain could help a thirsty rotary engine meet fuel economy and emissions requirements while still producing plenty of power. A hybrid system is also more possible now that Mazda is teamed up with hybrid expert Toyota. Related Video:

Mazda Mexico debuts Mazda3 Turbo before official U.S. reveal

We should have been keeping an eye on our neighbors to the south, who did us the favor of showing off the turbocharged 2021 Mazda3 last week. The automaker teased the reveal for the U.S. market to happen on July 8. It's reasonable to expect slight changes between our two countries, but the Mexico introduction makes a good base to know what we're getting. The prime specs: 2.5-liter Skyactiv-G turbocharged four-cylinder with 227 horsepower and 310 pound-feet of torque. As suspected, this is the same engine found in the Mazda6, CX-5, and CX-9. As such, we expect those output figures are based on using 87 octane gasoline; in the other three Mazda offerings, 93 octane gas unlocks 250 hp and 320 lb-ft. So at worst, the Mazda3 turbo makes 41 hp and 124 lb-ft more than the naturally-aspirated engine in the current hatch and sedan. At best, the improvement runs to 64 hp and 124 lb-ft. Comparing the turbo Mazda3 to the segment-standard Volkswagen Golf GTI, the incoming 2021 German will make 241 hp and 273 lb-ft. Only a test drive will reveal how the battle of sportiness vs luxury turns out for the Mazda. The numbers make a case for the former, but there's enough of the latter to sway us into believing this will primarily be a quicker Mazda3, with nary a hardcore edge. The only transmission mentioned is a six-speed automatic with paddle shifters that sends power to both axles via mandatory all-wheel drive. In Mexico there are only two Mazda3 trims, which start at 329,990 pesos ($17,050 U.S.) and 429,900 pesos ($19,294 U.S.). The turbo will introduce two new trims there that start at 489,900 pesos ($21,987 U.S.) and 529,900 pesos ($23,782 U.S.), MSRP increases of about 29%. For the supplemental dosh, the Mazda3 turbo in Mexico comes with a leather interior, sunroof, 12-speaker Bose audio, Android Auto and Apple CarPlay, LED headlights, blind-spot monitoring and auto-tint side mirrors, reversing sensors, and black 18-inch aluminum wheels.  Other than those black wheels and some badging, though, there's nothing to differentiate the forced-induction model from the naturally aspirated one. When a Jalopnik source tipped that site to some 2021MY Mazdas based on dealer codes, there was a "MAZDA3 HB PP TURBO." That "PP" likely stands for Premium Package, which is the highest trim offered on our Mazda3 right now, already comes with 18-inch black wheels, and starts at $28,445 after destination.