2.0l Convertible Automatic Black Clean Car Fax Touring Leather on 2040-cars

Auto blog

1993 Mazda RX-7 Retro Review | A '90s hero turns 25

Boom times build interesting cars. In the late 1980s, Japan was flush with capital, and automakers spent like the party was never going to end. Suddenly building the third-generation RX-7 — the world's most advanced twin-turbo rotary sports car — seemed like the most natural thing a small car company hailing from Hiroshima could do. On this side of the Pacific, however, there was no context for the sudden influx of unusually tricked-out Japanese hardware flooding American dealerships. And none of the Japanese sports cars of the era was more unusual than the FD-generation Mazda RX-7, imported from 1993 to 1995 (and continuing on in Japan until 2002). Although the island nation's economy was headed on a downward spiral by the end of 1990, Mazda was in no position to pull back and walk away from the development dollars that had already been spent on its latest RX-7. As a result, Americans were able to briefly bask in the glow of one of the most unique engineering experiments ever unleashed on unsuspecting buyers. For its time, the Mazda RX-7 was a spaceship. With fluid lines that screamed "exotic," it joined the NSX in showing that supercars didn't have to have European blue blood running in their cooling systems to elegantly snag eyeballs. The twin-rotor, 1.3-liter 13B-REW situated behind the RX-7's front axle revved all the way to 8,000 rpm on its quest to produce 255 horsepower and 217 pound-feet of torque, with a pair of sequential turbos handing boost duties back and forth around the 4,500 rpm mark. A five-speed manual gearbox was standard with the FD (a four-speed automatic was optional), as was a curb weight in the neighborhood of 2,800 pounds — nearly 500 lbs less than the contemporary Toyota Supra. Significant figures for the era, to be sure. While they might pale in comparison to the average sports car today, slide into the RX-7's cockpit and drive the car, rather than just crunch the numbers. You'll quickly discover what can be accomplished when the company that engineered the Miata pulls a full John Hammond and "spares no expense" developing a world-beating sports car platform. The 1993 Mazda RX-7 I've been loaned from Mazda's classic collection is an R1 car, which means tighter suspension tuning, a few cosmetic upgrades, and a Competition Yellow paint job.

2016 Mazda CX-5 recalled to address failing DRLs

Mazda announced Tuesday that it will recall more than 35,000 examples of the 2016 CX-5 crossover to address an issue that may lead to deterioration or failure of its LED daytime running lights.  In affected models, the gasket used to seal the wiring harness to the LED module was not manufactured to Mazda's specification. As it degrades over time, it can release sulfur, which in turn can potentially corrode the LED control circuit, causing the LEDs themselves to flicker, illuminate poorly or even fail outright.  Per Mazda, there is no alert for this condition, so drivers can potentially lose daytime running light function without realizing it, leaving them tougher to spot in poor light.  The campaign will cover 36,761 CX-5s sold in the U.S. and U.S. territories. Mazda says no accidents or injuries related to the issue have so far been reported.  This new campaign has not yet been published in the National Highway Transportation Safety Administration (NHTSA) recall database, and Mazda's statement did not include details of the proper remedy for the issue or when customers can expect to be contacted to arrange for service.  We expect that all 2016 CX-5s with LED DRLs will receive new harness gaskets and that those showing signs of LED module corrosion will have those replaced as well.  The 2016 CX-5 has been the subject of four other recall campaigns — including one for an improperly torqued steering knuckle bolt and another for a defective fuel filler pipe — but this is the first  new campaign for that model year since 2016.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

New Mazda CX-4 teaser shots emerge ahead of Beijing debut

The Kodo styling language seen on last year's Koeru concept seems to translate well to a production car, judging by these teaser images of the upcoming CX-4 from Mazda's Chinese press site. And, as has been seen on several recent Mazdas, concept cars can be quite close to their eventual production versions. An earlier press release implies the CX-4 should be seen as a more coupe-like counterpart to the CX-5, with some of the MX-5's characteristic and often emphasized jinba ittai feel injected into it – if the MX-5 is all about the rider and horse being one, the CX-4 would just be a slightly bigger steed. The 19-inch wheels and LED headlights are some of the more attention-grabbing details on the car. Inside, there's a head-up-display and a MZD connect infotainment screen as seen on other current models. The hardware on the "Exploring-Coupe SUV", as Mazda call it, should match the CX-5: 2.2-liter SKYACTIV-D turbodiesels in some markets, 2.0 and 2.5-liter SKYACTIV-G gasoline engines in most. There will also be a choice of front-wheel-drive or all-wheel-drive. The Beijing Motor Show opens to the public on April 29th, so we won't have to wait a whole lot longer to see the whole thing. Related Video: