1993 Mazda Miata Limited Edition on 2040-cars

Auto blog

Perk up your Mazda Miata with BBR's new 248-horsepower turbo kit

For three decades, enthusiasts have argued whether the Mazda MX-5 Miata needs more power. For its part, Mazda seems fine with leaving the Miata as is, even reducing the horsepower from the third- to fourth-generation models, though the car lost a little weight. That's where tuners like BBR in the UK and Flyin' Miata here in the US step in, offering aftermarket solutions for those that crave a little more grunt. BBR announced today that its new 248-horsepower Stage 1 turbo kit is ready and waiting for the new 2.0-liter-powered ND Miatas, including the new Miata RF. BBR's first Miata turbo kit was released all the way back in 1990. Since then, the shop has been tuning and honing its craft, releasing ever-more potent variations its comprehensive power kit. This new version, like the previous ones, focuses not only on adding more power but maintaining the level of drivability and refinement you expect from all Miatas. The Mazda electronic safety features are retained, and the team is working on CARB emissions approval. That said, with BBR tune an ND Miata will hit 60 mph in just 5.0 seconds, roughly two seconds quicker than stock. To get the peak 248 horsepower and 236 lb-ft of torque, BBR does more than simply slap on a big turbo. In 2014, BBR began using a Mazda3 as a development vehicle in preparation for the new Miata's launch. A twin-scroll turbocharger is mounted onto a custom cast-iron manifold. A front-mounted aluminum intercooler keep things cool and doesn't require cutting up the bodywork. The engine breathes in through a K&N air filter and exhales through a stainless steel downpipe. The whole thing is controlled by BBR's Starchip / EcuTek RaceRom ECU software package. Other upgrades include silicone turbo pipes, an aluminum battery tray, a recirculating piston type dump valve, a carbon-fiber heat shield, and stainless steel oil and water lines. BBR is offering extended warranties from 12 to 36 months. In the US, the sole distributor is Flyin' Miata in Colorado. At $5,695, it's not a cheap proposition, but it is less expensive than one of Flyin' Miata's V8 swap kits. Less expensive (and less potent) performance kits are also available. Related Video: News Source: BBR Aftermarket Mazda Convertible Performance turbo tuner tuning

2021 Mazda3 to gain a turbocharged engine, finally, probably

Buckle up, Mazda fans. The Mazda3 turbo might really be happening, says a report from Jalopnik. Some details from Mazda’s dealership extranet system observed by Jalopnik suggest weÂ’ll see a 2021 Mazda3 turbo in both sedan and hatchback form. We donÂ’t have eyes on the documents ourselves, but the report says both the sedan and hatchback versions will be all-wheel-drive only with no option for front-wheel drive. In addition to that, it looks like the turbo models will be exclusively automatic, as theyÂ’re both only listed as “6A” in MazdaÂ’s system. Sorry to break the hearts of those who were hoping for a manual turbo. The hatchback manual with the naturally aspirated 2.5-liter from the modelÂ’s first two years appears to be sticking around for a third, in case you were worried. There is one minor mystery that's a possible glimmer of hope for someone wanting more performance, though. The report says that a “MAZDA3 HB PP TURBO” is listed in the docs. Our hearts are yearning for the PP to stand for Performance Package, but it probably stands for “Premium Package.” ThatÂ’s the name of MazdaÂ’s highest trim Mazda3 right now, and itÂ’d make sense to offer the turbo engine on the upmarket model. The last we heard on this front was from a report published over a year ago. It suggested MazdaÂ’s 2.5-liter turbocharged four-cylinder as a possible drop-in. That motor makes 250 horsepower and 310 pound-feet of torque on premium fuel and would be a big upgrade to the 186 horsepower and 186 pound-feet of torque made by the naturally aspirated 2.5-liter under the hood now. Without a manual, the obvious transmission would be MazdaÂ’s traditional six-speed automatic. ItÂ’s a solid transmission for cars like the Mazda6 and CX-5, but itÂ’s not meant for sports cars, as we recently found in the automatic Miata RF. So no, this Mazda3 turbo wonÂ’t be a Mazdaspeed. It would simply be a quicker Mazda3, and while we can still pine for a true Mazdaspeed, this will be a welcome addition to the lineup. ThereÂ’s even more ancillary news in the report, too. The docs that Jalopnik saw say weÂ’ll be getting a Mazda3 with a 2.0-liter four-cylinder in 2021. That one has to be the Skyactiv-X engine weÂ’ve been patiently waiting for. It has already launched in Europe, but was delayed in the U.S. Those 100th Anniversary Edition Mazdas get a callout, too. The Mazda3 version of that is reportedly set to be equipped with the turbo engine, making that particular model even more enticing.

2019 Mazda3 gets only two engines in U.S.; here are details on suspension, AWD

We learned a lot about the 2019 Mazda3 hatchback and sedan when it made its debut at the L.A. Auto Show. It will still have a manual transmission, it will offer all-wheel drive for the first time, and it's a stunner inside and out. But we still had questions about some of the details, so we spoke with folks from Mazda, including a couple of engineers for details on engines, suspension and drivetrains. First off, of the five engines announced for the Mazda3, just two of them are slated for the United States. At launch, the Mazda3 will be offered only with a naturally aspirated 2.5-liter four-cylinder. It's mechanically pretty much the same as what you'll find in the Mazda CX-5 and Mazda6. It even features cylinder deactivation. The only real difference between this engine, its predecessor, and the one in other Mazdas is some minor engine tuning tweaks. Power is almost the same with 186 horsepower and 186 pound-feet of torque, gains of 2 horsepower and 1 pound-foot. Fuel economy is rated at 27 mpg in the city, 36 on the highway, and 30 overall for front-wheel-drive models. We would expect the all-wheel-drive model to have slightly worse fuel economy simply due to extra weight and having to power two extra wheels. The Skyactiv-X engine will become available later in 2019. It will be rolled out in Europe first, with America coming after. When it does come here, it will be offered in states with stricter emissions regulations before coming to other states. While we're on the topic of engines, we also probed a bit about the possibility of the turbocharged 2.5-liter engine coming to the Mazda3. We did get the typical response of not being able to comment on future product. However, they did confirm that the turbocharged engine does in fact fit in the new Mazda3, since it and the naturally aspirated engine are very similar, and the naturally aspirated engine still uses an enormous header, meaning turbo plumbing wouldn't be an issue. Everyone we spoke with at Mazda did emphasize that they are listening closely to buyers, which is what led to the turbo engine being offered on the Mazda6 and CX-5, as well as the introduction of all-wheel-drive to the Mazda3. So, if you, like us, want to see the turbo engine added to the Mazda3, let the company know. They might just do it. Now as for drivetrains, the company is still deciding which trims and which combinations of engines will be offered.