1993 Mazda Miata Base Convertible 2-door 1.6l on 2040-cars

Auto blog

50 engineers kept the rotary alive at Mazda for 8 years

The Mazda RX-Vision concept is one of the standouts at this year's Tokyo Motor Show thanks to a drop-dead gorgeous design and a revival of the Wankel engine. The fact that the rotary is still in development at Mazda is thanks to a dedicated group of 50 engineers. According to Automotive News, their dream for the last eight years has been to bring this storied engine design back to the street. It won't be easy. Because of its design, the rotary suffers from poor fuel economy and high emissions. Making the challenge even harder, Mazda reportedly only gives them a small budget, but they continue to chip away at the problem. "These 50 engineers want to develop the rotary engine, therefore they joined Mazda," company research and development boss Kiyoshi Fujiwara told AN. "If I stop the rotary engine, probably they want to leave." For the Skyactiv-R under the RX-Vision's svelte hood, the team reportedly started from the 16X rotary project. Dating back to 2007, that 1.6-liter engine was supposed to improve torque and fuel economy thanks in part to direct injection. After additional development, insiders even suggested that the engineers might have finally solved the powerplant's issues. However, Mazda never put the mill into production, and the RX-8 remains the company's last Wankel-powered model to be offered in showrooms. "We have a dream that one day, this design with a rotary engine will achieve a level that customers will accept," CEO Masamichi Kogai said to AN. Mazda is quite clear that the RX-Vision might never go on sale without a suitable rotary. Although if it does see production, the coupe would likely use a stiffened version of the Miata's chassis, AN reports. Before anyone can place an order, these 50 determined engineers still have a lot of work ahead of them. Related Video:

Mazda halts Mazda3 sales for fuel tank problem

Mazda is issuing a stop sale and recall on 14,406 examples of the 2015-2016 Mazda3 in the US with build dates between May 21, 2015, and August 24, 2015, due to a possible fuel leak. There are no reports or accidents or injuries from this problem. According to the company, a defective fuel shut-off valve can allow gasoline to move from the tank and fill the charcoal emissions canister. If it gets too full, there can be a leak, which obviously carries the risk of a possible fire. The engine might stall, as well. Affected owners will be notified to bring their Mazda3 in "as soon as possible." Dealers will inspect the vehicles, and if a problem is found, the fuel tank and charcoal emissions canister will be replaced. During the downtime, customers will get a free rental or loaner car, as well. Those who are particularly concerned can also call Mazda roadside assistance to have their vehicle delivered for the check and possible repair. Related Video: Mazda Issues Stop Sale and Stop Delivery for Mazda3 Fuel Tank Recall WASHINGTON, DC (October 2, 2015) – Mazda Motor Corporation will conduct a Safety and Emission Recall Campaign for certain 2015-2016 Mazda3 vehicles (built from May 21, 2015 through August 24, 2015), which could have a safety-related problem. A defect in the fuel shut-off valve may allow fuel to flow from the fuel tank into the charcoal emissions canister. With this condition, the check engine light may illuminate, and if the fuel exceeds the canister capacity, fuel leakage could occur, increasing the risk of a fire and/or engine stalling. Approximately 14,270 vehicles in the U.S. and 136 vehicles in Puerto Rico are affected. Owners of subject vehicles will be notified by mail in early October. They will be informed to bring their vehicle to the nearest Mazda dealer as soon as possible. Dealers will inspect the fuel tank to determine if the defect exists on the vehicle. If the defect exists, the dealer will replace the fuel tank and charcoal canister at no cost to the customer. A rental or loaner vehicle will be provided at no cost to the owner, until the vehicle is repaired for this concern. If there are no concerns, the vehicle will be returned to the customer. Should a customer not want to drive the vehicle to the dealership, they may contact Mazda's 24-hour Roadside Assistance service at 800-866-1998 and have the vehicle picked up and delivered to the dealership. There have been no reports of accidents or injury related to this issue.

Mazda is developing gas and diesel inline-six engines

Once the favored engine configuration for luxury and high-performance cars, the inline-six suffered a bit when the transverse (east-west) engine configuration became popular during the shift to front-wheel drive cars. The packaging benefits are obvious – no driveshaft or transmission intruding on passenger space or rear differential on cargo volume, plus turning the engine 90 degrees meant the front of the car could be shorter. But the inline-six is slowly, slowly crawling out of near-obsolescence, notably in BMW, Jaguar-Land Rover and Mercedes-Benz products. Add Mazda to that mix: An investor report first spotted by Jalopnik and confirmed by Mazda reveals that the company is developing a Skyactiv-X and Skyactiv-D inline-six that will be installed longitudinally (north-south) in a new "Large Architecture" platform. Before reading any further, let's catch up on the Skyactiv-X and -D technologies. The former basically burns gasoline like diesel, providing some benefits and advantages of both types of combustion - here's an explainer on how that all works. We drove a prototype 2.0-liter Skyactiv-X 4-cylinder engine in a Mazda3 mule, too. And the Skyactiv-D series of engines is a comparatively typical turbodiesel. Mazda has a 2.2-liter turbodiesel inline-4 that has had a long and convoluted development and certification process, but is finally showing up in the 2019 CX-5. Since Mazda has implemented these technologies in existing four-cylinder engines, we would assume that the new Skyactiv engines will be "modular" – that is to say, they'll essentially be the existing engines with two extra cylinders, rather than an entirely new design. Jaguar-Land Rover is doing a similar thing with its Ingenium engine family. Assuming the Mazda engines will be modular would mean they'll be roughly 3.0-liter units, which is a common displacement for modern inline-sixes. And as we mentioned eariler, they'll be arranged longitudinally, unlike any other Mazda save the MX-5 Miata (and the long-departed rotaries), in a new vehicle architecture. As part of a medium-term plan over the next six years, Mazda will develop some unspecified vehicles on what it calls the "Large Architecture". These vehicles will have 48V mild hybrid and PHEV capabilities, and be able to use a version of Mazda's i-Activ AWD system. Why do this at all?