1991 Mazda Miata Base Convertible 2-door 1.6l Mx5 on 2040-cars

Auto blog

This is what a 1,200-hp twin-turbo 4-rotor looks like in a Miata

We've seen the diminutive Mazda MX-5 Miata swallow plenty of big engines, but New Zealand drifting ace "Mad Mike" Whiddett is roaring into where-no-man-has-gone-before territory. Wanting to replace his 515-horsepower "MADBUL" RX-7 and its twin-turbocharged, three-rotor 20B engine, his new ride is an NC-series Miata with four rotors and twin Garrett turbochargers courtesy of Pulse Performance Race Engineering. It is called "RADBUL," and expected power at standard boost is 1,200 hp, but the builders at Pulse Performance think it will get up to 1,500 hp at full boost. And yes, that exhaust exits through the hood. Four-rotor engines are actually popular - builds are detailed on forums like this one from 2007 and this one from 2008, this UK company or this Canadian company will sell you one complete - but they're usually being prepped for an RX-7. Mad Mike's choice of a Miata for this enterprise makes this about as extreme as you can get, short of throwing it into a Mazda R360. You can watch Mad Mike tell the story of the build in the video, and check out the first and second installments about the build on the Red Bull site.

Crossovers help Mazda post its best January sales in 24 years

Mazda's 2017 ended on a bit of a flat note. It wrapped up the year with 2.8 percent fewer U.S. sales than 2016, and 8 of the 12 months lower month-over-month. But 2018 is off to a much brighter start with the company having its best January sales month since 1994, with just under 25,000 cars sold. Besides that headline statistic, the higher sales also mean this January exceeded 2017's sales by 15 percent or about 3,300 cars and put it ahead of January in that healthy 2016 year. Compared with this past December, though, sales are down about 2,000 cars. The gains are entirely due to the success of Mazda's crossover SUVs. The CX-5 was the best of the best with a month-over-month gain of over 66 percent. In actual numbers it sold about 13,500 copies compared with about 8,000 last January. The big three-row CX-9 had a big jump going from 1,600 units sold last January to about 2,300 for a gain of almost 47 percent. Even the little CX-3 saw a small gain between the two Januarys, going from about 1,200 to 1,350 sales. View 14 Photos Mazda's January would've been even better if its conventional cars hadn't dropped so much. Both Mazda Miata and Mazda6 sales dropped by just over half. The Mazda dropped from 3,300 sales to just under 1,600, and the Miata dropped from a little over 900 to a little over 400. Mazda3 held on a little better with just a 12 percent drop from last January going from about 6,600 to 5,800 sales. The lopsidedness of these sales isn't all that surprising. Crossovers have been a boon to loads of manufacturers. For example, Mitsubishi had an 2017 full of sales improvements, with the company finally breaking 100,000 units for the first time in years, and it was all because of improving crossover sales. January's sales also continue an unfortunate downward trend for Mazda's cars, with both the Mazda6 and Mazda3 having month-over-month declines every single month since February. It will be interesting to see if the new turbocharged engine option on the Mazda6 will improve sales of the sedan later this year. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Refreshed 2017 Mazda 3 and 6 get G-Vectoring Control

Back in June, we told you about Mazda's G-Vectoring Control system, which is an additional layer of unobtrusive cornering assistance to help maintain traction at the limits of adhesion. It's subtle to the point of being hard for a human being to detect, even a Mazda engineer, as we found out driving a G-VC equipped Mazda 6 around Mazda Raceway Laguna Seca. We knew then that the G-VC system would make it to the 2017 Mazda 3 and 6, but now all the details of both mildly refreshed cars are available. Let's start with the Mazda 3, which has a few more changes than its larger stablemate. As is standard industry practice, a mild facelift includes available LED headlights and taillights, a new grille, and a monochrome rear bumper. Inside, the slightly recontoured steering wheel now has available heating and the manual handbrake has been replaced by an electronic one. Fans of handbrake turns will frown, but those handles take up an immense amount of room (relatively speaking) inside the center console. The redesigned center storage bin takes better advantage of that newly freed-up space. Lastly, Mazda claims the 3 is quieter thanks to improved insulation and weatherstripping. The Mazda 6 was just refreshed last year, so the list of changes is even shorter. The larger sedan benefits from similar sound-reducing tweaks as the 3, and the entry-level 6 with a manual transmission now comes with the Mazda Connect infotainment system, a real upgrade from the older non-touchscreen system. One thing that both share is an available full color head-up display, which replaces a functional but ancient-looking monochrome unit. If you've been in a Mazda currently on sale with this old-looking system, you'll really appreciate the way this new one looks. We can't wait to try it out. Both new Mazdas go on sale in September. Pricing isn't available at this time. Related Video: Featured Gallery 2017 Mazda3 Unveiling View 15 Photos Related Gallery 2017 Mazda6 Unveiling View 14 Photos Related Gallery 2017 Mazda3 View 36 Photos Related Gallery 2017 Mazda 6 View 33 Photos Image Credit: Live photos copyright 2016 Drew Phillips / Autoblog.com Mazda Hatchback Sedan mazda 3