1990 Mazda Miata Base Convertible 2-door 1.6l on 2040-cars

Auto blog

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.

Mazda explains the thinking behind the MX-30's small battery pack

Mazda's first production-bound electric car, the MX-30, relies on a 35.5-kilowatt-hour lithium-ion battery pack for power. That's relatively small, but the Japanese firm argued it's exactly what the model needs to let motorists drive electric while keeping their environmental footprint in check. Christian Schultze, head of Mazda's European research and development center, told Automotive News Europe the MX-30's battery is responsibly-sized. He explained engineers took a variety of factors into account when debating kilowatt-hours, including how much energy is required to build the pack, how much electricity is needed for a full charge, and the environmental impact of replacing the battery, which Mazda expects could be necessary after the MX-30 has covered about 100,000 miles. Sticking with a smaller pack yields total CO2 emissions on par with a turbodiesel-powered Mazda3. In contrast, using a 95-kilowatt-hour battery (which is close to what Tesla's bigger models use) would have increased the MX-30's life-long CO2 output considerably by requiring more energy to build, and needing far more electricity to achieve a 100% charge. We're not quite sure that math or battery longevity assumption hold up under scrutiny. In any case, small is the direction Mazda decided to go. The trade-off is that the MX-30 (pictured) is expected to drive for about 124 miles between charges, and that figure was achieved on the hugely optimistic WLTP testing cycle; real-world mileage will be lower. That's hardly a jaw-dropping number, and the crossover doesn't qualify for the coveted long-range label, but Schultze told British magazine Autocar it's more than enough to cover the daily transportation requirements of the average European motorist, which stands at a total of 31 miles. That's significant, because Europe will be one of the MX-30's key markets. Deliveries are scheduled to begin in early 2021. Mazda hasn't announced whether it will sell the MX-30 in the United States, or if it will wait until it has a longer-range electric car to enter the segment.

Flyin' Miata's 525-hp V8-powered ND finally hits the streets

Flyin' Miata, in its valiant quest to turn Mazda's roadsters into small, Japanese Corvettes, has finally finished its first V8-powered ND Miata. The company has been slowly teasing us with images and videos for months, but it wasn't until this week that the car finally made it to the streets. As soon as the current ND generation Miata was released, Flyin' Miata started the work to shoehorn a GM LS3 under the hood. The company has a history of building brutish, V8-powered Miatas. It sells everything from minor parts to full V8 conversion kits. For those with the cash that prefer to avoid the hassle, Flyin' Miata will sell you a complete, turn-key car. The price hasn't been finalized, but customers should expect to pay about $50,000 plus the cost of the MX-5. The new car has a worked-over LS3 that sends 525 horsepower to the rear wheels through a Tremec T56 transmission. Flyin' Miata says the rear differential comes from a V8 Camaro. Other new bits include exhaust, suspension, brakes, and a roll cage. Flyin' Miata tells us that the V8-swapped ND will weigh 2,592 lbs, a little more than 200 lbs more than the porkiest stock Miata. Despite twice as many cylinders and more than three times the displacement of the stock four banger, the LS3 V8 is a relatively small and lightweight engine. The finished car has a 53:47 front to rear weight distribution. Final touches are being finished, but cars and kits should be available soon. This article has been updated with some info straight from Flyin' Miata. Thanks, Keith! Related Video: News Source: Road & Track, Flyin' Miata Mazda Convertible Performance flyin miata