One Owner - 5 Speed Manual on 2040-cars

Auto blog

Mazda still really wants to bring diesels to America

Mazda's Skyactiv program has delivered much of what it promised for the brand's latest crop of products, namely great fuel economy and excellent driving dynamics. However, the Skyactiv diesel engine has yet to reach our shores. It's been promised ever since the new Mazda6 showed up here for the 2014 model year. According to a new report from Automotive News, Mazda's CEO Masamichi Kogai said that the Mazda Skyactiv D diesel powertrain is still set to make an American appearance. He told Automotive News that there is an internal timeline to get it to the States, and while he didn't reveal the timeline, he said he wants it to come here before he steps down as CEO. The powertrain is offered elsewhere, so it fits in the company's current vehicles, but the US has specific regulatory hurdles, and the engine's extra cost has to make sense from a sales and volume perspective. We doubt VW's diesel scandal helped the engine's sales pitch, either. Automotive News also reports that the next generation of Skyactiv designs and engines are also on their way and will advance and improve on the current generation's strengths. Engineers revealed to Automotive News that they expect a 30 percent improvement in efficiency and are developing an engine with the sky-high compression ratio of 18:1. This impressive ratio could be a further indication of Mazda's pursuit of homogenous charge compression ignition (HCCI) engines. Mazda has had plenty of success with its strategy of making very efficient internal-combustion engines, but there are some concerns that the company can only improve so much. The main worry comes from the company's lack of investment in hybrid and electric powertrains. Even Mazda's North American CEO Masahiro Moro expressed concern about meeting a 54.5 mpg mandate for 2025. That mandate will no longer take effect, but increasing fuel economy requirements will always be an issue. Related Video:

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.

2019 Mazda3 pricing starts at over $20,000, 2.5-liter engine standard

Pricing for the 2019 Mazda3 hatchback and sedan has been announced, and the base price has gone up by about $3,000. The new cheapest model is a front-drive, automatic Mazda3 sedan, and it starts at $21,895. The base Mazda3 now has the 186-horsepower 2.5-liter 4-cylinder as the standard engine, whereas the old model came with a 155-horsepower 2.0-liter engine and manual transmission as standard. Compared like-to-like, a 2018 Mazda3 in a similar spec would be slightly more expensive ($22,035) than the 2019 model. Opting for the hatchback on the base trim adds an additional level of equipment, with 18-inch wheels instead of 16-inch ones, Apple CarPlay and Android Auto, dual automatic climate control, leather wrapped steering wheel and shift knob. It also gets more safety equipment including blind-spot monitoring, automatic emergency braking, radar cruise control, automatic high-beams, automatic wipers and lane-departure warning with lane-keep assist. That all adds up to a $2,600 price increase over a base sedan. These features are available on the sedan for an extra $1,600 in the form of the Select package. For all other trims, opting for the hatchback adds $1,000. Higher trim levels add features such as better sound systems, real leather, a sunroof, heads-up display and power heated seats. In addition to pricing, Mazda revealed drivetrain options for the Mazda3, and they're not great for fans of manual transmissions. The Mazda3 hatchback with front-wheel drive and Premium trim is the only manual offering, and it starts at $28,395. On the upside, at least Mazda isn't relegating manual transmissions to the stripped out versions, but on the downside, there isn't a cheap manual option for those on a budget. And of course, if you want the sedan or all-wheel drive, the six-speed automatic is your only choice. Mazda has told us that it could match a manual with all-wheel drive, but clearly it doesn't see a market for that in the U.S. But like with the addition of the turbocharged Mazda6 and CX-5, if there's demand, such a combination could become available, but keep in mind the odds will still be slim. You can see the full breakdown of trims and prices below. The 2019 Mazda3 will be available in March.