2013 Mazda Mazda6 S Grand Touring Sunroof Nav Rear Cam! Texas Direct Auto on 2040-cars

Auto blog

Mazda expands scope of vehicles affected by Takata airbag recall to 330k

Earlier this week a Reuters report indicated that Mazda was considering a nationwide expansion of its recall for vehicles equipped with Takata airbag inflators. The company has now confirmed said expansion, with the vehicle count jumping from 86,770 to 330,000 affected in the US. As before, the affected vehicles are Mazda6 and RX-8 cars from the 2004 to 2008 model years. Mazda reports that Takata has tested a "large number of inflators removed from Mazda vehicles" and not found any to be "non-compliant" as of yet. With that said, the company also reports in its statement that one 2005 Mazda6, located in Florida, has been identified as having had an "abnormal" deployment of the driver's side airbag. For what it's worth, though the company's statement references the Takata inflator issue as a proper recall, it is calling its own program of notification a "Safety Improvement Campaign" for the moment. Find the full, if brief, Mazda press release in the form below. UPDATED MAZDA STATEMENT REGARDING TAKATA AIRBAGS Dec 11, 2014 WASHINGTON, DC (December 11, 2014) – In addition to the actions announced on December 4, 2014, as discussed in a separate document, Mazda today announced the following steps in the Takata recall: Mazda will institute a nationwide Safety Improvement Campaign of 2004-2008 model-year Mazda6 and RX-8 models equipped with certain Takata airbag inflators. The nationwide Safety Improvement Campaign will cover the driver's-side airbag inflator, as Mazda has not made a safety defect determination at this time. This action will support us to gather additional parts for examination and to promote customer satisfaction and safety. There are approximately 330,000 vehicles included in this Safety Improvement Campaign in the United States So far, Takata has tested a large number of inflators removed from Mazda vehicles, and NONE have been found to be non-compliant at this time One vehicle – a 2005 Mazda6 located in Florida – has been identified as having experienced an abnormal driver's-side airbag deployment. Mazda has worked closely with NHTSA on this situation Mazda will participate in the independent, industry-wide joint testing program for Takata airbag inflators For history, on December 4, 2014, Mazda announced: It would expand the area of the high-temperature, high-humidity region recall to include the Gulf Coast states.

2016 Mazda CX-3 First Drive

If there's any doubt in your mind about the importance of B-segment crossovers, consider this: our review of the 2016 Mazda CX-3 arrives on your screen less than 24 hours after our first test of the 2016 Honda HR-V. Both of these vehicles are hugely important entries for their respective automakers. And while they take a similar shape and will compete head to head, the truth is, they're very different products. The HR-V is a knockout because of its excellent packaging and added versatility over Honda's own Fit and Civic. It's a wholly competent product, and we imagine it'll be one of, if not the best-selling vehicle in the class. In terms of being desirable for customers, it checks all the necessary boxes: frugal, functional, efficient, and affordable. Mazda takes a similar approach, but focuses instead on its key strength of offering cars that are great to drive, and look damn good. What's more, the CX-3 won't have to share showroom space as the HR-V does with the Fit – the all-new Mazda2 isn't slated for the US right now. Instead, the new CUV will serve as an entry point into the brand. Because of this, Mazda is betting big on the CX-3. That all starts with a product that's appealing to the eye. Design director Derek Jenkins says Mazda "didn't want to do the funky route" with its compact CUV – a nudge to the Nissan Juke and Fiat 500X, right there. Instead, the CX-3 uses the Kodo design language that Mazda has perfected since its production debut on the CX-5 in 2012. Across the board, the company's products look incredible, and the CX-3 is right at home amongst Mazda's latest beauties. Notice the long hood with a flowing character line that runs over the front fender and down the body side, chiseled off at the end with tight rear proportions and a small overhang. Huge arches draw focus to the premium 18-inch wheels found on our Grand Touring CX-3, but swallow up the 16-inch rollers used on lesser models. The glass area is kept to a minimum, but visibility from inside is still quite good. Details like the LED accents in the head- and taillamps look premium and aggressive. From all angles, this is an attractive crossover. It's a bold, dynamic entry in a class filled with cutesy, oddball, and bland designs. Underneath the CX-3 is the Skyactiv chassis found in the new Mazda2. At 168.3 inches long, 69.6 inches wide, and 60.7 inches tall, the CX-3 is smaller than the Mazda3 in every dimension except height.

Japanese students turning Mazda CX-5 into Dakar Rally-ready off-roader

Students at Japan's Nihon Automobile College (NATS) are transforming a first-generation Mazda CX-5 into a full-blown off-roader that looks ready to compete in the Dakar Rally. Named CX-Runner, the one-of-a-kind model will make its debut at the Tokyo Auto Salon opening its doors in January 2020. The Tokyo Auto Salon is the Japanese equivalent of the annual SEMA show, so anything goes under the bright lights. NATS students began the CX-Runner project with a used 2012 CX-5 and seemingly set out to leave as few original parts as possible. While the project isn't finished yet, a sketch released by the school suggests the crossover will receive wheel arch extensions, an external roll cage, a beefier suspension, and a shorter front bumper that increases the approach angle.  Photos published on the school's official Facebook page show the project is moving along nicely. The body extensions are made with a composite material that looks like Kevlar, and fitting the rear wheel arches required sealing the back doors, which is fine; the CX-Runner will be a two-seater. We don't know if students are planning to make changes to the CX-5's powertrain yet, but a thick skid plate will protect whatever is under the hood from expensive impacts with obstacles encountered off-road. nats-mazda-cx-runner-project-1 View 3 Photos The Tokyo Auto Salon will open its doors on January 10, so the students have time to finish the custom-made body kit, install the suspension, paint the CX-Runner, and fit the roll cage. They're not just doing this for fun, though. NATS began offering a customizing class in 1998, and building a tuner car is one of the requirements aspiring builders need to fulfill in order to graduate. With that in mind, it's no surprise that NATS will again have a big presence during the 2020 edition of the Tokyo Auto Salon. In addition to the CX-5 off-roader, its students are building six custom cars including a Nissan 370Z roadster wearing front and rear fascias sourced from a GT-R, a Toyota 2000GT-inspired convertible based on the Suzuki Cappuccino kei car from the 1990s, and a four-door, five-seater Toyota 86 built on Camry bones but powered by the coupe's flat-four engine. Relate Video: