2004 S 3.0l Auto Gray on 2040-cars

Auto blog

Mazda CX-5 diesel gets EPA fuel economy ratings

Mazda has been promising that it will bring the Skyactiv-D diesel engine to the United States pretty much since the last Mazda6 redesign for the 2014 model year. And even in the wake of delay after delay, the company has insisted it will happen. Well, it looks like we may not be far from the fulfillment of this promise, since the EPA and DOT's FuelEconomy.gov website now has numbers for the diesel-powered Mazda CX-5. What's surprising, besides the existence of hard numbers, is that those numbers aren't actually that big of an improvement over the gas engine. In fact, highway numbers are the same as the gasoline versions. The front-drive CX-5 diesel gets 31 mpg on the highway, and the all-wheel-drive one gets 30 on the highway. The diesel does see improvements in the city. The front-drive model gets 28 mpg versus 25 for the gas equivalent. The all-wheel-drive model gets 27 mpg rather than 24 for the gasoline version. Also concerning is the fact that the CX-5 diesel isn't the only diesel in the segment. The Chevy Equinox is available with a diesel, too, and while city mpg is about the same, it can hit 38 mpg with all-wheel-drive and 39 with front-drive on the highway. With this in mind, Mazda will probably market the engine as more of a performance upgrade, and maybe something with a bit of extra towing capacity. This is because the engine is expected to make a bit over 170 horsepower and 310 pound-feet of torque. The power number is a smidge below that of the 187 from the 2.5-liter naturally aspirated gas engine, but the torque number is much higher than the gas engine's 186 pound-feet. We've also reached out to Mazda for comment on this development. A representative offered no further comment beyond the company staying committed to diesels. Related Video:

Ever wonder how to really pronounce Japanese automaker names?

People tend to get very set in their ways when it comes to the pronunciation of words. Just look at the endless debates over whether or not to say the final 'e' in Porsche (which you should in terms of correct German enunciation). Or the argument about whether to follow the British convention and give the 'u' in Jaguar a special delivery or to say the 'ua' diphthong as more of a 'w' sound, as usually happens in the US.
This short video doesn't answer either of those automotive questions, but it does allow a native Japanese speaker to demonstrate the accepted pronunciations for several, major automakers from the country. One benefit is that it clears up the occasional debate over whether Nissan should be said with a long or short 'i' sound. Also, listen closely to how the female host says Mazda as Matsuda, the way it's actually said in the language. Even if this doesn't change the way you enunciate these brands, at least now you know the accurate way in Japanese.

Perk up your Mazda Miata with BBR's new 248-horsepower turbo kit

For three decades, enthusiasts have argued whether the Mazda MX-5 Miata needs more power. For its part, Mazda seems fine with leaving the Miata as is, even reducing the horsepower from the third- to fourth-generation models, though the car lost a little weight. That's where tuners like BBR in the UK and Flyin' Miata here in the US step in, offering aftermarket solutions for those that crave a little more grunt. BBR announced today that its new 248-horsepower Stage 1 turbo kit is ready and waiting for the new 2.0-liter-powered ND Miatas, including the new Miata RF. BBR's first Miata turbo kit was released all the way back in 1990. Since then, the shop has been tuning and honing its craft, releasing ever-more potent variations its comprehensive power kit. This new version, like the previous ones, focuses not only on adding more power but maintaining the level of drivability and refinement you expect from all Miatas. The Mazda electronic safety features are retained, and the team is working on CARB emissions approval. That said, with BBR tune an ND Miata will hit 60 mph in just 5.0 seconds, roughly two seconds quicker than stock. To get the peak 248 horsepower and 236 lb-ft of torque, BBR does more than simply slap on a big turbo. In 2014, BBR began using a Mazda3 as a development vehicle in preparation for the new Miata's launch. A twin-scroll turbocharger is mounted onto a custom cast-iron manifold. A front-mounted aluminum intercooler keep things cool and doesn't require cutting up the bodywork. The engine breathes in through a K&N air filter and exhales through a stainless steel downpipe. The whole thing is controlled by BBR's Starchip / EcuTek RaceRom ECU software package. Other upgrades include silicone turbo pipes, an aluminum battery tray, a recirculating piston type dump valve, a carbon-fiber heat shield, and stainless steel oil and water lines. BBR is offering extended warranties from 12 to 36 months. In the US, the sole distributor is Flyin' Miata in Colorado. At $5,695, it's not a cheap proposition, but it is less expensive than one of Flyin' Miata's V8 swap kits. Less expensive (and less potent) performance kits are also available. Related Video: News Source: BBR Aftermarket Mazda Convertible Performance turbo tuner tuning