Leather! Sunroof! Bluetooth! Heated Seats! Dual Climate! Ipod Ready! Loaded!!!!! on 2040-cars

Auto blog

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

Aussie Mazda MX-5 Miata specs leak suggests power loss

Mazda's 2016 MX-5 Miata reveal didn't include much in the way of specifications, but the car's debut seems to have blown the lid off of the rumormill, with the latest word out of Australia including fresh claims of curb weight and engine output.
Before delving into the findings from Motoring.com, we're going to take a moment to find a few grains of salt. It's not that we don't trust the Oz publication, it's just that we wouldn't be surprised to learn their car's specifications will vary from that of our eventual North American car.
Of course, we don't expect the footprint of the new ND model to itself to differ much - it will still be the most compact Miata ever - overall length is expected to check in at just over 154 inches - that's about 1.4 inches shorter than the original NA Miata and over 4 inches shorter than today's NC generation, yet it'll ride atop a longer wheelbase and be slightly wider while sitting lower to the ground.

2002 Mazda MX-5 Miata powered by a Jaguar-sourced V6 for sale

Cars & Bids, a relatively new site that specializes in auctioning modern enthusiast cars, is selling a 2002 Mazda MX-5 Miata. While that's hardly unusual, this example lost its four-cylinder engine and gained a Jaguar-sourced V6. Pulling a 3.0-liter six out of a 2000 S-Type and dropping it into an unsuspecting Miata is apparently easier than it sounds. England-based Rocketeer offers a kit that makes the swap reasonably straightforward, though the listing notes the factory air conditioning system is not compatible with the new engine. Cold air aside, the installation is done so neatly that it looks like Mazda envisioned the Miata with a bigger engine. Jag's V6 inevitably adds weight to a roadster praised globally for its nimble handling, but it also brings a whole lot of horsepower to the table. Left stock, a 2002 Miata is powered by a 1.8-liter four-cylinder that makes 142 horsepower and 125 pound-feet of torque. The example listed on Cars & Bids puts 220 horsepower and 221 pound-feet of torque under the driver's right foot, figures that easily offset the weight gain. And, somewhat surprisingly, the six spins the rear wheels through a stock five-speed manual transmission. Flyin' Miata sway bars and Koni shocks improve handling. Close the hood, and this Jagazda looks like a run-of-the-mill 18-year-old Miata. The seller made no modifications to the body, it's still painted in its original shade of silver, and he kept the stock 15-inch wheels. The dual exhaust tips hint at the V6, but they're subtle enough to surprise more than a few racers at the next autocross event. The auction is live now, and bidding stands at $4,250 as of writing with about three days left before the hammer drops. If you miss your chance to bag it, several shops sell kits that let skilled shade-tree mechanics shoehorn Mazda's K-Series V6 (which powered the MX-6 and the Ford Probe, among other cars) into an older Miata. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.     Featured Gallery 2002 Mazda MX-5 Miata with Jaguar V6 View 14 Photos Aftermarket Jaguar Mazda Convertible