4dr Sdn Auto S Grand Touring Mazda Mazda3 Sedan S Grand Touring New Automatic Ga on 2040-cars

Auto blog

Rumored Mazda CX-3 may not be for US

Mazda has used its Kodo design language to make some of the most attractive, affordable cars in the world right now, with the Mazda3, Mazda6 and CX-5 (pictured above), but it still lacks a crossover in the smaller class, which are becoming popular on the world market. It seems like a natural fit then, that the Japanese company would shrink its CUV design even smaller for a CX-3 to fill the gap. However, a rumor suggests that the compact might not make it to these shores.
The Mazda2-based crossover is due later this summer in Japan and is launching in Europe and emerging markets later, according to Automotive News citing a report in Japan's Nikkei newspaper. The little CUV would cost between 1.5 million yen and 2.0 million yen ($14,700-$19,500) in Japan and be available with diesel and petrol engine options. However, the report made no mention of selling it in North America. There is a glimmer of a chance for the CX-3 here. Mazda is upgrading its Mexican factory to 230,000 annual unit capacity by 2016, which gives it the room to add the new vehicle.
While the midsize CUVs are hugely popular in the US, compacts like the Buick Encore are still a small portion of things. If Mazda could time the CX-3's launch right here, it could take advantage of the lack of competition.

Mazda files patents for a sequential twin-turbo setup

Mazda has a history of interesting engine technologies, from yesterday's rotary engine to tomorrow's compression ignition engine, and new patents show it still may have some internal combustion tricks up its sleeve. The one on display in these patents isn't especially new in concept, though. A sequential twin-turbocharger setup is something Mazda itself used on the third-generation RX-7. But it's something we haven't seen much of lately. It looks like it could have some possible advantages over older sequential systems, and it has some potential advantages for enthusiasts. First a quick and dirty primer for what makes a sequential twin-turbo system distinct from other twin-turbo systems. In many twin-turbo engines, there are simply two turbos that work together as one bigger turbo. They're the same size, and they spool up at the same time. With a sequential setup, at low rpm, a smaller turbocharger is spooled up first at low-rpm for quicker throttle response, and as the rpm and exhaust pressure increases, a valve opens up that allows a larger turbocharger to also spool up and provide high-rpm boost. That's basically how the Mazda design shown above functions. A big flap blocks off the larger turbocharger exhaust inlet, channeling all the exhaust to the smaller turbo. When more exhaust is available at high rpm, it looks like that flap opens up to spool up the big turbo, too. What's interesting here is that the way the turbochargers are packaged takes up less space than past systems. It looks like both turbos are contained in one unit that shares the same exhaust outlet, meaning the exhaust manifold could be kept simple and compact. In fact, the piping for compressed intake air could also be shared, reducing the amount of piping, which would further decrease the amount of materials and possible failure points. There are a number advantages of making this system smaller. The potential applications of the system are much greater, since it could fit in smaller cars with smaller engine bays. Making the system smaller also means that there won't be as much weight, which is important from both fuel economy and performance standpoints. Finally, the smaller setup likely uses fewer materials, which could make the system cheaper and thus easier to offer on a wider range of vehicles, or at least more profitable for Mazda.

Crash test videos show how rust compromises safety

These recently released Swedish videos serve as a reminder that rust isn't just a cosmetic flaw, when it comes to cars. The insurance company Folksam and the homeowner organization Villaagarnas Riksforbund gathered examples of two relatively popular, but by now rusty cars, and then performed crash tests with them at the Thatcham Research facility in Britain. The results are sobering. The rustier cars chosen for the tests were first-generation Mazda6s, cars that have a reputation for early-onset rust in salty surroundings, such as the Nordic countries in Europe or the Salt Belt in the U.S. The cars in the other end of the spectrum were fifth-generation Volkswagen Golfs, which thanks to their body treatment only really start to show rust at over ten years old. But rust isn't just on the surface, it goes bone deep. While the Mazda did decently well in Euro NCAP testing as a new car, there's now a 20 percent higher risk of death in the 2003-2008 Mazda due to the degradation of its bodyshell. In the rusty car, the chassis rail separates from the floor, the footwell ruptures, the sill gives way, the seat mountings move and the dummy's head hits the B-pillar; all important failures, despite Thatcham saying the cars actually performed better in the crashes than they expected with all the rust. But still, the corroded structure isn't able to transmit loads in the way it was originally designed to do. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The Golf does significantly better — despite rust flakes flying when the Golf hits the wall — as the years have only caused it to lose a single point. An important thing to remember is that the cars aren't tested in comparison to corresponding new, 2018 cars: the tests are in reference to the crashworthiness standards in place when they were new. The cars' airbags inflate like they were supposed to, but on the Mazda the dummy's head bottoms out the airbag due to the car's structure failing, meaning the airbag cannot perform as designed. Driven cautiously, an older car is still mostly fine for driving around. But tests like these remind us that it's not enough that a car runs and drives, if the body has turned into Swedish knackebrod. And if you repair the visible rust and the structure underneath remains as compromised as ever, there's an ugly truth under all the bondo. Perhaps it isn't such a bad idea to have yearly roadworthiness inspections.