2013 Mazda 3 Speed,only 1k Miles,loaded,clean Carfax,like New,hurry N Get It!!!! on 2040-cars

Auto blog

2014 Mazda CX-5 with 2.5-liter Skyactiv engine

Back in October, we compared the relative merits of two new and very good small crossovers: the 2013 Ford Escape and 2013 Mazda CX-5. The CX-5 we tested then had Mazda's 2.0-liter Skyactiv-G engine under its hood, and it managed to just edge out the EcoBoosted Ford despite being down by some 23 horsepower and 34 pound-feet of torque. Had it been available, the 2.5-liter Skyactiv engine that we recently had the opportunity to try out in the 2014 Mazda CX-5, it may have made that comparison even easier to call in the Japanese CUV's favor.
Clearly, if you're in the market for a reasonably sized crossover, the CX-5 should, at the very least, be on your test-drive list. The new engine offering will let buyers opt for a stronger powerplant, with 184 hp and 185 lb-ft on tap. On our second day in Austin's Hill Country - the first was spent quick-spinning the 2014 Mazda6 i Sport, you'll recall - we covered a couple of hundred miles and put the new CX-5 through its paces; here's what we turned up.
Driving Notes

Mazda6 diesel is coming, too, Mazda promises (again)

As we noted our piece earlier today about the CX-5 diesel, we've been waiting for Mazda to bring its Skyactiv-D engines to market for years. Tripped up by an emissions certification nightmare that caused delays and resulted in lackluster power and fuel economy numbers, they're late to the party. In the CX-5 diesel, it's also a questionable proposition at almost $4,000 more than the much more powerful CX-5 Turbo. But today, Mazda's U.S. president confirmed to Autoblog that the diesel engine would make its way into the 6. Like the CX-5, it'll only be offered with all-wheel drive and only on the top Signature trim level. Unlike the CX-5 diesel, which goes on sale in July, we don't know when the Skyactiv-D-powered 6 will go on sale. But it seems like later this year is a good bet. How much longer can Mazda wait, really, once the CX-5 diesel is on sale? The diesel Mazda6 will use the same 2.2-liter engine as the CX-5. It'll probably offer the same power figures – 168 horsepower at 4,000 rpm and 290 pound-feet of torque from a low 2,000 rpm, with a 5,500-rpm redline. The fuel economy bonus for choosing a diesel over the turbocharged gas engine should roughly parallel the difference in the CX-5: about 5 mpg in the city and 3 mph on the highway. That said, we don't know the 6's EPA fuel economy numbers yet. We expect the price premium to roughly parallel the CX-5 as well, so the diesel will likely be several thousand dollars more than the gas turbo engine in the same Signature trim. These are educated guesses, of course, and when we have firmer numbers or solid estimates from Mazda we'll let you know.

Mazda's Tokyo concept foretells of rotary revival

Mazda has long been rumored to be planning a revival of its rotary-powered sports car. Some of those rumors may have come down to wishful thinking as much as concrete information. But now, on the eve of the Tokyo Motor Show, new details have come to light. The Japanese automaker is slated to unveil a two-door sports car concept, previewed in the teaser image above. Little in the way of firm information has been made available prior to the show car's debut, but sources are now citing senior company officials as confirming it has a rotary engine. "It is a two-door, two-seater, Mazda CEO Masamichi Kogai told Autocar. "It is a pure sports car design. We have MX-5 and another icon is a rotary sports car. We haven't talked about market reach but this would be in that segment." R&D chief Kiyoshi Fujiwara added: "People think rotary can not meet modern eco demands. The SkyActiv engineers worked on rotary and gave it cutting-edge tech. It is an essential part of our DNA and it [will] just be passed onto future engineers. It is synonymous with the brand. Some time in the future it will return and be called SkyActiv-R." The last time Mazda produced a rotary-powered model, of course, was with the RX-8, which ended production in 2012. That was preceded by three generations of RX-7, the first of which will be celebrating its 40th anniversary in 2018. If it manages to get the Wankel technology up to modern standards, that could provide just the right opportunity for Mazda to launch a new model. Reached for comment, Mazda spokesman Jacob Brown told Autoblog: "While we can confirm that Mazda continues to develop rotary engines, we cannot confirm production of a rotary at this point. Rotaries are one of the signature engineering technologies that define Mazda, and we will continue exploring them to see where they may fit for production applications." Related Video: