2012 Sedan Used Gas I4 2.5l/152 6-speed Manual Fwd Blue Save on 2040-cars

Auto blog

Mazda still has a team working on rotary engines

The flame still burns within Mazda to stage a rotary engine revival. Before you start getting excited, it's way too soon to start saving money for the fabled, next-gen RX-7 or RX-8. Still, company boss Masamichi Kogai confirmed to Autocar that the Japanese automaker has an engineering team dedicated to improving the Wankel. This development group has the hard task of trying to make the rotary stack up to modern internal combustion engines in terms of emissions and fuel-economy standards. Neither factor were ever exactly Wankel's strong suits. Kogai described them as working "very enthusiastically" to Autocar. The boss didn't discuss any future RX-vehicles or the size of the team, however, a report from last year indicated that there were 30 engineers in partnership with universities to update the engine's design. After problems keeping up with emissions and fuel economy, Mazda built it's last rotary for an RX-8 in June 2012. Since then, there have been intermittent rumors of a return. One possible solution was a design called the 16X that was supposed to offer more torque and better fuel economy. Another possibility was a small-displacement unit as a range-extender in an electric Mazda2. Rumors of a new RX-7 have been heard for years. In 2013, Kogai clearly said that it wasn't happening. When asked again last year, he reiterated the same point.

Mazda shows lightweight MX-5 Spyder and Speedster at SEMA

Ever since Mazda dropped the first teaser on us last week, we've been looking forward to seeing what it had in store for us at SEMA this year. Now we've seen it what Mazda has dubbed the MX-5 Spyder and MX-5 Speedster, and they were worth the wait. The Spyder goes vintage with a silver paintjob and a brown top stretched overhead. It also has an aero kit, grille, and tonneau cover done up in carbon fiber, rides on 17-inch wheels, and features a natural leather interior. The blue Speedster, meanwhile, goes for the stripped-down, wind-in-your-hair experience. It has no roof or windshield, just a tiny deflector at the front of the dashboard. It's dropped an inch closer to the ground on an adjustable coilover suspension with 16-inch alloys, and features a center-exit exhaust. Carbon fiber helps trim 250 pounds from the curb weight, along with a stripped out interior trimmed in Alcantara. Both look pretty slick, and disappoint only in so far as they (like so many of their predecessor concepts) won't be heading for production. If they were, we'd be hard pressed to choose between the two. Which would you go for? Mazda Reveals Extreme Lightweight Design Concepts at 2015 SEMA MX-5 Concepts Display Two Different Takes on Staying True to Pure, Lightweight Sports Car Philosophy LAS VEGAS (November 3, 2015) – Mazda revealed two design concepts today at the SEMA Show in Las Vegas, based on its all-new 2016 MX-5 Miata—MX-5 Spyder and MX-5 Speedster—demonstrating two vastly different takes on lightweight, open-air performance. Lightweight. Fun-to-drive. Roadster. Those three tenets have served as the foundation for the Mazda MX-5 Miata since its 1989 introduction and continue to serve the new fourth-generation model. Focused, lightweight engineering is a guiding principle of every Mazda vehicle made with SKYACTIV Technology, allowing for greater efficiency, improved performance and agile handling dynamics. But what if that sense of lightweight performance were taken to the extreme? What if Mazda's North American designers harkened back to vintage roadsters to create thoroughly modern, bespoke concepts for what a lightweight performance car should be The results would be the MX-5 Spyder and MX-5 Speedster concepts. "Both MX-5 Spyder and MX-5 Speedster are uncompromising designs that highlight the core strengths of MX-5," said Ken Saward, design manager, Mazda North American Operations.

Huet Brothers working on new Miata-based retro coupe

Does the name Huet ring a bell? The Dutch brothers started out doing classic car tours in Europe before they started designed and building their own retro sports cars. The first was called the Huet Brothers Special. It was based on an old Triumph TR6 and surfaced back in 2009. But a few years later they started showing designs for a new coupe that called for a straight-six engine under a long bonnet with a fastback roofline, and started taking orders. Over the past two and a half years we didn't see anything materialize out of the Huet Brothers' plans, but word out of the Netherlands has it that the design is back on the table.
According to the Autovisie section of Dutch newspaper De Telegraaf, Tino and Paul Huet were planning on building their coupe on the base of the MX-5 Miata. But now that Mazda is preparing to launch an all-new model, the Huets have decided to wait until next year and build their dream car on the new Skyactiv roadster chassis.
Rather than trying to shoehorn in a bigger engine (or the subsequent diesel model that was set to follow), the Huets are reportedly prepared to stick with Mazda's four-pot, offering it in stock form and various states of upgraded tune.