2010 Mazda 3 S-sport 4-door (6-speed Manual) on 2040-cars
Madison, Wisconsin, United States
I am selling my 2010 Mazda 3 S-Sport. I absolutely love this car, but I now need a vehicle that can pull a trailer.
I bought this car brand new from Don Miller Mazda in Madison, and made sure it was loaded with every feature available for this model in 2010 (listed below). I have a short commute and ride a motorcycle in the summer, so the car has very low miles. I took it in last week for an oil change and inspection of the brakes, wheels, and clutch. All are in like-new condition. I took immaculate care of this car and it shows: there are absolutely no mechanical issues and the interior is in perfect condition. The exterior is also in excellent condition except for 1 dent in the rear bumper. Someone bumped into it in a parking lot a few weeks ago, denting the rear bumper on the passenger side. Since it is in the plastic directly behind the wheel well it should actually be pretty easy to push out, I just didn't get around to it once the weather got cold. The Mazda 3 is the best car in its class, and you are not going to find one in this condition with these features and low mileage anywhere else. Installed Packages: Moonroof & Bose package:
Tech package:
|
Mazda Mazda3 for Sale
2008 mazda 3 mazdaspeed hatchback 4-door 2.3l(US $13,295.00)
2010 mazda 3 s hatchback 4-door 2.5l
2010 i sport used 2l i4 16v manual fwd sedan
2008 mazda 3 mazdaspeed hatchback 4-door 2.3l(US $12,800.00)
2011 mazda3 hatchback with bose stereo and sunroof(US $15,500.00)
2.5l s model moonroof bluetooth steering wheel audio cruise controls 1 owner
Auto Services in Wisconsin
Wrench`s Repair ★★★★★
Superior Automotive ★★★★★
Southside Tire Co Inc ★★★★★
Shawano Service ★★★★★
Sedlak Chevrolet Buick ★★★★★
Quince Auto Sales ★★★★★
Auto blog
2019 Mazda3 Hatchback AWD Premium Second Drive | Gushing about an exceptional car
Mon, Aug 12 2019The 2019 Mazda3 Hatchback is quite simply one of the best cars I've ever driven. During my week with one, specifically a range-topping Premium package version for $31,335, I struggled to come up with bad things to say apart from elements like rear visibility and back seat headroom that are directly related to its distinctive, avant garde design. That's an acceptable tradeoff in my book. So many of the new 3's elements can serve as a measuring stick for other cars. Not just its specific compact hatchback/sedan class, but all other cars, period. I had the Mercedes CLS 450 at the exact time, a car I deeply appreciate and that cost $69,000 more, and yet it was a struggle to decide which I wanted to drive. Perhaps not surprising given the 3's history, but the measuring stick is set first by the handling. It dances between corners with composure and feedback that you just don't get in cars any more ͖ let alone at this price point. This is a car you feel through your butt, your heels on the floor and your hands on the wheel. Everything is just so right. And it should be noted that I came to this conclusion before remembering that Mazda switched to a cheaper, less sophisticated torsion beam rear suspension for this latest model. Perhaps you can tell the difference driving 10/10ths at a test track, but in the real world, I certainly didn't notice or log a complaint. Grip is superb. Even when the tires gave way a bit on my mountain road evaluation route, there was only a bit of squealing and it resolutely whipped itself through hairpins with shockingly little understeer for a front-drive-based car, helped no doubt by its all-wheel drive system. It would be interesting to see how much understeer the front-drive versions allow, and whether AWD is mitigating torque steer given the 3's not-insignificant power. As it is, the 3's standard 2.5-liter four-cylinder produces 186 horsepower and 186 pound-feet of torque, which is substantially better than virtually every other base engine in the segment. Its throttle response should be copied by everyone, as should the steering. OK, maybe not Porsche, which I keep finding myself drawing comparisons to whenever experiencing a new Mazda. Take that as the compliment it seems to be. I'd also like to note that the 3 has a six-speed automatic transmission rather than an easily confused eight-, nine- or eleventy-speed unit. Or a damn CVT.
Mazda just restored the 787B's forgotten older brother
Fri, Aug 12 2016Among Mazda's many racecars, none is as famous as the 787B, and for good reason. The 787B remains the only Japanese car and the only rotary-powered car to win overall at the 24 Hours of Le Mans. It wasn't Mazda's only successful endurance racer, though. Before the 787B, there was the 767B. Mazda's 767B racecars competed in the IMSA GTP class at endurance races throughout 1989. They featured 630-horsepower four-rotor engines and were very successful in their class. This newly restored car took first and second place class finishes in five of the six races it participated in, and each finish was in the overall top ten. The one exception was a DNF in which the transmission failed. Twenty-five years after the 767B's glory days, Mazda initiated a complete teardown and restoration of the aged car. The work was done by Downing Atlanta and supervised by former Mazda racers Rick Engman and Jim Downing. (Fun fact: Downing was one of the designers of the HANS device.) The shop has also restored other racecars for Mazda, including one of the 787Bs. The car went through a two-year rehab and will make its track re-debut at the Monterey Motorsports Reunion. The event takes place next weekend at Mazda Raceway Laguna Seca where the track will once again feature the angry shriek of a competition-grade rotary engine. Related Video: Image Credit: Mazda North American Operations Motorsports Mazda Automotive History Racing Vehicles Pebble Beach
Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel
Mon, Jun 11 2018Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.