2005 Mazda Mazda3 - Only 82k Low Miles, Sunroof, Automatic, Sporty Gas Saver! on 2040-cars

Auto blog

Japan plans real-world diesel emissions test after companies fail

Japan's transport ministry plans to start real-world diesel emissions tests after an experiment found four models from Toyota, Nissan, and Mitsubishi that produced more nitrogen oxide (NOx) emissions than the nation's rules allow, according to The Japan Times. Regulators there usually only perform emissions checks in the lab. The VW diesel scandal has everyone double-checking their figures. Diesel versions of the Toyota Hiace van, Land Cruiser Prado, and Nissan X-Trail produced up to 10 times more NOx than allowed. The Mitsubishi Delica D:5 was up to five times over the limit, The Wall Street Journal reports. There was no evidence of defeat devices in the vehicles. Mazda performed well in the experiment, though. The CX-5 passed with nearly the same results on the road and in the lab. The Demio, better known as the Mazda2, did nearly as well with only slighter higher figures in the real world than in the controlled setting. The experimenters theorized the reason for the excessive emissions was that cold weather caused the engines' software to shut off the exhaust gas recirculation to prevent damage, according to the WSJ. However, this behavior also increased NOx production. Toyota, Nissan, and Mitsubishi don't have to worry about punishment from the transport ministry because this check was just an experiment. Their models already passed the mandated lab tests, which was the only requirement, according to The Japan Times. As governments begin greater real-world emissions tests, the results suggests diesels aren't very clean. A recent check in France found models from Ford, Renault, and Mercedes-Benz that didn't perform up to the standards. Regulators in India conducted similar evaluations and ordered VW to recall over 300,000 vehicles. Related Video:

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.

Mazda2 refreshed for 2020 with new style and tech

The North American market Toyota Yaris is a badge engineered version of the Mazda 2. Now, the Mazda underneath the Toyota badging has received some updates in its home market of Japan, and it will be interesting to see if or when the U.S. counterpart will be refreshed with any of these updates. The 2020 Mazda 2, now indeed called "Mazda 2" instead of the older Demio name on the Japanese market, has received new front end styling to bring it in line with bigger Mazda models. The grille and bumper are new, as are the headlights with adaptive LED technology and LED daytime running lights. Apparently the headlights are constructed out of 20 individually controlled LED blocks to optimize light output and direction, which sounds awfully interesting for this class of vehicle. The front end design, just like the new 16-inch alloy wheels, is Mazda-specific and the Yarisized version is unlikely to benefit from them, especially since the headlights are also different on the Toyota. Cabin materials have also been updated, and the driver’s seat is available with six-way power adjustability for 2020. The MZD Connect infotainment has Apple Carplay and Android Auto support, like the Yaris setup. In addition, cabin comfort is said to have been improved with better soundproofing, which is sometimes sorely needed in this class of cars. Safety and convenience features include adaptive cruise control, which is impressive on a city car, and the Mazda 2 also has the G-Vectoring Control Plus system for high-speed stability. Both the diesel and gasoline versions will get Mazda's i-Eloop brake energy regeneration system. The Japanese market also gets an all-wheel-drive version, which is surely a hoot despite only being available with the automatic transmission. CarAdvice says the Australian market will receive the redesigned Mazda 2 early next year, which is probably in line with the rest of the global market that gets it as a Mazda instead of a Toyota; Mazda says Japan market pre-orders have started today and official sales will begin on September 12th. It pays to remember that the base car dates back to 2014, and that the 2020 refresh is a facelift instead of a ground-up redesign. Assuming the usually expected shelf-life for the facelifted edition, the 2 will have racked up respectable mileage from the “DJ” generation bodyshell.