2010 Mazda Cx-9 Awd Touring Leather 7 Seater 14k Miles on 2040-cars

Auto blog

2014 Mazda6 recalled due to fuel overfill fire risk

Mazda is recalling 19,000 Mazda6 sedans from model year 2014, over concerns that the fuel tanks can be filled up too much. What is it with Mazda and fuel tanks?
The big concern is, obviously, spillage when filling up. There's also a risk that a radical temperature swing could cause the fuel volume to expand, causing a full tank to spill over without the driver knowing about it. According to the National Highway Traffic Safety Administration bulletin, if the fuel spills over, it could end up in something called the charcoal canister, which helps with the car's emissions. If it fills up the canister, it could leak out onto the road. None of this is really desirable.
The affected vehicles were all built between October 25, 2012 and May 9, 2013. It's unclear if there have been any fires due to this problem. Dealers should have been notified by now, while owners should begin receiving official recall notifications very soon.

Mazda Vision Coupe | Tokyo Motor Show's big, sensuous 4-door

Mazda has been making a lot of noise recently about not giving up on the rotary engine. Enough that we started to think it might show a new epitrochoid-engined concept at this year's Tokyo Motor Show. But the brand is nothing if not surprising. Have you driven a CX-5 or a CX-9? Have you noted the real-world fuel economy in a Mazda3? Have you looked at a Miata RF? So instead of trotting out the latest in Wankel weirdness, today in its home market, the Mazda folks pulled the silk off of a stunning full-size four-door design concept, the somewhat inaptly named Vision Coupe. Known mainly for sporty and affordable small(ish) vehicles, Mazda hasn't really had an entry in this category since ... ever. Well, save for the staid and short-lived 929 of the '90s (and the rotary-powered, 7/8-scale Olds Cutlass, JDM-only Roadpacer of the '70s.) As customers flock to crossovers, it's not exactly a category brimming with vitality, at least in the American market — sales of the existing Mazda 6 are down in the States by nearly 25 percent this year, double the market average for cars. And this thing is bigger than that. But the decision is intentional and strategic in Mazda's mission to head upscale and focus on clean design — differentiators from its mass-market Japanese peers. "A big sedan has always been the symbol of a brand going premium. It's the icon of a brand," says Julien Montousse, Mazda North America's director of design. "It tells that Mazda is becoming serious in reaching that goal." Breaking even more conventions, while Mazdas generally are cohesive and well-rendered in their design, you would be hard-pressed to find one quite this sensuous. The Vision Coupe looks like an Aston Martin Rapide that has been placed in a sauna until its body-mass index has whittled down to marathoner levels, and then scalloped and stripped of any unnecessary ornamentation, save for a kind of fingerprinted whorl in its side cove. It is elemental, at once planar and burnished, with the lovely long-hood/short-deck proportions of a classic front-engine, rear-wheel-drive grand tourer. Its interior is similarly edited, doing away with the proliferating screens of other vehicles in the category, utilizing instead a digital analog instrument panel and a sophisticated heads-up display that keeps a driver focused on the road and shows just what is deemed necessary, and nothing else.

Mazda files patents for a sequential twin-turbo setup

Mazda has a history of interesting engine technologies, from yesterday's rotary engine to tomorrow's compression ignition engine, and new patents show it still may have some internal combustion tricks up its sleeve. The one on display in these patents isn't especially new in concept, though. A sequential twin-turbocharger setup is something Mazda itself used on the third-generation RX-7. But it's something we haven't seen much of lately. It looks like it could have some possible advantages over older sequential systems, and it has some potential advantages for enthusiasts. First a quick and dirty primer for what makes a sequential twin-turbo system distinct from other twin-turbo systems. In many twin-turbo engines, there are simply two turbos that work together as one bigger turbo. They're the same size, and they spool up at the same time. With a sequential setup, at low rpm, a smaller turbocharger is spooled up first at low-rpm for quicker throttle response, and as the rpm and exhaust pressure increases, a valve opens up that allows a larger turbocharger to also spool up and provide high-rpm boost. That's basically how the Mazda design shown above functions. A big flap blocks off the larger turbocharger exhaust inlet, channeling all the exhaust to the smaller turbo. When more exhaust is available at high rpm, it looks like that flap opens up to spool up the big turbo, too. What's interesting here is that the way the turbochargers are packaged takes up less space than past systems. It looks like both turbos are contained in one unit that shares the same exhaust outlet, meaning the exhaust manifold could be kept simple and compact. In fact, the piping for compressed intake air could also be shared, reducing the amount of piping, which would further decrease the amount of materials and possible failure points. There are a number advantages of making this system smaller. The potential applications of the system are much greater, since it could fit in smaller cars with smaller engine bays. Making the system smaller also means that there won't be as much weight, which is important from both fuel economy and performance standpoints. Finally, the smaller setup likely uses fewer materials, which could make the system cheaper and thus easier to offer on a wider range of vehicles, or at least more profitable for Mazda.