2010 Mazda Awd 4dr Touring on 2040-cars

Auto blog

Mazda says Skyactiv-X will come to the U.S, but not when

Mazda executives say the new 2.0-liter Skyactiv-X powerplant will still take some time to arrive to the North American market. The Skyactiv-X is a high-compression gasoline engine, and its 16:1 compression ratio is comparable to that of a diesel engine. "We have a lot of technology. And we are introducing each technology in each region when the time is right," said Mazda North America CEO Masahiro Moro at the SAE International WCX Conference, according to Automotive News. Moro stated that while the Skyactiv-X can indeed pass EPA emissions regulations, it's not in the immediate pipeline for U.S-bound Mazdas; the slightly less hardcore Skyactiv-G will be amended first. The launch-spec 2.5-liter Skyactiv-G engine in the new Mazda 3 will reportedly be supplemented by a 2.0-liter Skyactiv-G, which also has a bold compression ratio: according to Mazda, its ratio of 14:1 is the highest of any production gasoline engine. However, Moro didn't state the exact timeline for that Skyactiv-G's arrival, either. The compression ratio of the 2.5-liter "big block" available now is 13:1. In the 2019 model-year Miata roadster, the 2.0-liter Skyactiv-G makes 181 horsepower, and an earlier Slovakian Euro-spec leak mentioned the 2.0-liter 3's power figure at 164hp. The bottom line is thermal efficiency through being able to extract more energy out of gasoline, and moving from G to X would improve fuel economy by 20-30 percent while giving more power. If the Slovakian specifications are to be believed, the Skyactiv-X would make 178h p and 164 lb-ft in the Mazda3.

Latest Forza Motorsport 5 car pack leaves us scratching our head (in a good way) [w/video]

As we scrolled down the roster of the latest car pack for Forza Motorsport 5, the Hot Wheels Car Pack, our expression became bemused over the strange mix of vehicles that we now have at our disposal. This is quite unlike any of the other sets of DLC Turn 10 Studios has offered. Sure, there are the typical headliner cars – the Lamborghini Veneno and 2015 Audi S3 – that will appeal to the mainstream racing fan or auto enthusiast. But this latest car pack is so jammed full of nuggets of automotive weirdness that it's hard not to get excited. The Hot Wheels pack has no shortage of racers, with a particular focus on historical offerings. A 1939 Auto Union Type D covers the pre-war era of Formula One, while a 1967 Lotus 49 and a 1952 Ferrari 375 represent post-war racing. For a modern twist, a Mazda USF2000 car slots in below the Indy Lights car from the Nurburgring booster pack. From here, things get vintage and weird. There are a pair of delightfully offbeat coupes, in the form of a 1974 Toyota Celica GT and a 1973 Ford XB Falcon GT (here's hoping we get a vintage Holden Monaro in the future). Those two are joined by a 1956 Ford F-100, which your author already plans on converting into a dragster with vinyl flames down the side (because that's what all vintage pickups should be). The new ride we're most excited about, though, is the 1983 GMC Vandura G-1500. Yes, that's the van from The A-Team, and we're sure it will prove to be an excellent canvas for the artists of FM5 to cover with airbrushed, fire-breathing unicorns and mystical, gray-haired wizards (or just poorly painted letters that read "Free Candy"). This latest car pack is the final monthly car pack for FM5, although Turn 10 is quick to point out that while the monthly updates are over, there will still be new batches of cars made available to gamers. As for the Hot Wheels pack, it's available now on Xbox Live for $9.99. Scroll down for the press release from Turn 10 Studios, as well as a video of the newest additions to Forza Motorsport 5's vehicle roster. Forza Motorsport 5 Hot Wheels Car Pack Now Available Turn 10 Studios is bringing the Hot Wheels® Car Pack to "Forza Motorsport 5," available for download today. The pack features a collection of vehicles built from the ground up for the new generation that car fans can collect and customize while putting their virtual driving skills to the test.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.