Mazda Low-rider on 2040-cars

Auto blog

Mazda2 successor to ride atop shortened CX-5 platform

Mazda, looking to make the most of its new, lightweight Skyactiv vehicle architecture, will allegedly use a version of the CX-5 crossover's platform to underpin its next-generation Mazda2 hatchback, according to a report from Just-Auto.com. Of course, the Mazda2 is a much smaller vehicle than its larger CUV stablemate, so some serious chopping will no doubt be in order when it comes time to engineer the replacement for the company's smallest hatch.
Currently, the CX-5 and the sleek new Mazda6 share many of the same platform components, and this architecture will already be scaled down to support the next-generation Mazda3 sedan and hatchback, which will debut later this year. Just-Auto.com states that all of Mazda's remaining front-wheel-drive vehicles will eventually switch to reworked versions of this Skyactiv platform, including the replacement for the larger CX-9 crossover.
Also of note, Mazda will reportedly be switching to shorter, four-year lifecycles for its vehicles. This means that the newly launched Mazda6 will be replaced for the 2016 calendar year, with a refresh coming sometime in 2014. That said, vehicles with platforms supplied by other automakers (like the upcoming MX-5 Miata replacement that will share its underpinnings with an Alfa Romeo product) will not necessarily follow this four-year rule.

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.

Mazda planning not one but two new crossovers for U.S.

Mazda has already announced plans to unveil a brand new crossover at the Geneva Motor Show, but it turns out there's another one in the pipeline set to satiate the appetites of a crossover-mad U.S. market. Speaking at the Chicago Auto Show, Mazda North America CEO Masahiro Moro told reporters the brand has another model planned for production at the $1.6 billion plant under construction with joint-venture partner Toyota in Huntsville, Ala. It'll be "a new crossover SUV which is exclusively designed for the North American market," Automotive News quoted Moro as saying. While it'll be a different product from the one debuting next month in Geneva, the two vehicles will share some architecture. The company is reportedly still finalizing the concept for it. Currently, Mazda sells three crossovers in the U.S.: the subcompact CX-3, the compact CX-5 and the larger CX-9. Together, the three vehicles, which constitute half of the tiny automaker's vehicle lineup, posted sales of 195,778 for 2018, up 15.8 percent from 2017. They accounted for nearly two-thirds of the brand's total vehicle sales of 300,325. Production is expected to start at the new Alabama plant in mid-2021, Moro said, and add capacity for 150,000 units of crossovers. The plant is expected to employ up to 4,000 workers with a total capacity of 300,000 vehicles a year. Toyota plans to build the Corolla there alongside Mazda's crossovers. Mazda last week released the teaser pic shown above of its forthcoming new crossover headed for Geneva. It could be the next and slightly larger version of the CX-3, which will use the Skyactiv Vehicle Architecture that also supports the new Mazda3. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.