Mazda Rx-8 on 2040-cars

Auto blog

2016 Mazda2 won't come to the US

Hoping to get your hands on the new Mazda2? Don't get your hopes up too high, because the latest word has it that the new hatchback won't be available in the United States. According to the report from Automotive News, Mazda's US office has decided against bringing the new Mazda2 to American showrooms. This despite it being made just south of the border in Salamanca, Mexico. The reasons are apparently two-fold. For starters, Mazda sales offices around the world have been clamoring for larger allotments of the new 2, and the company can only supply so many. "We could have had it, but we would have had a number that didn't make much sense with 600 dealers and with the marketing it takes to launch a new car," Robert Davis, Mazda's senior VP of US sales operations, told AN. For another, Mazda is apparently not convinced the new supermini would resonate with US buyers, who are increasingly migrating towards crossovers. So Mazda is focusing instead on "products that make us and our dealers considerably more profit than a Mazda2 does." That doesn't mean the latest Mazda2 will be entirely out of our reach forever, though. The company's agreement with Toyota will see a sedan version sold in the US as the Scion iA. Mazda is also certifying it to US safety and environmental standards so that it can sell the 2 in Puerto Rico, which means that it wouldn't take much to change course and bring the hatchback into the US in the future: "It'll always be there if we need it," Davis told AN. Reached for comment, a spokesman for Mazda's North American operations told Autoblog that "The Mazda2 launch in the U.S. market is on hold in order to evaluate the B-Car segment and enable us the opportunity to focus on the launches of the refreshed Mazda6 and CX-5, and the all-new MX-5 roadster and CX-3 subcompact crossover SUV." That leaves the aforementioned CX-3 - which is, incidentally, based on the same architecture as the Mazda2 - as the smallest mainstream model that Mazda will offer Stateside.

2019 Mazda MX-5 Miata First Drive Review | More power is the icing on top

SAN DIEGO — When Mazda announced that the 2019 Mazda MX-5 Miata was getting a serious increase in power, I was both excited and nervous. I was excited because more power is always exciting, and it was no insubstantial increase. At 181 horsepower, it's the most powerful production Miata ever offered, beating out turbocharged Mazdaspeed Miata's 178 horsepower. Plus it has more revs to play with. But what had me worried was whether this power would mess up the friendly, playful character of the Miata. The 155-horsepower 2.0-liter engine is just about perfect, almost universally loved by the Autoblog staff and other reviewers, with good midrange torque and short gearing that always made it feel quick in nearly every rev range. It felt like the right amount of power for the chassis, too. There was just enough to get it loose without working too hard, but it wouldn't spin you around unexpectedly. I could imagine a couple of ways the new engine could affect that sweet balance, too. A bit too much power could risk some of the Miata's accessibility and predictability. It might become more serious and less fun-loving. I also feared that in pursuit of a higher redline and more horsepower, the low-end of the rev range might become painfully slow. Honda owners know this feeling whenever their VTEC-equipped screamers drop out of the aggressive cam profile, and the Toyota 86 and BRZ suffer from an awful lack of torque right in the mid-range that doesn't recover until nearly redline. All of this was on my mind when the assembled reviewers were briefed by Mazda engineers about the car. It started out like most presentations, with a brief rundown of the goals of the car and what Mazda has done with the model so far. Then came a chart showing the power curves of the NC, current ND, and the 2019 model, and my fear of a loss of low-end grunt dissipated. The amount of power and torque over engine speed is nearly identical between the old and new ND Miatas right up to around 4,500 rpm. And then from there, the 2019 continues making more power all the way to its 181-horse peak at 7,000 rpm, 500 rpm higher than the previous model's redline. This was a good sign. Mazda managed to get these gains with no sacrifices through many small upgrades. The throttle body is wider with a slimmer throttle plate, the intake manifold has longer runners and dual paths, and the intake ports are larger.

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.