Like New 2004 Mazda Rx8 Le 93k on 2040-cars

Auto blog

Mazda planning more powerful MX-5?

The new Mazda MX-5 will be available with a 1.5-liter four with 129 horsepower or 2.0-liter with 155. And while either engine may seem a tad on the small side for a sports car, they keep perfectly in line with what the Miata is all about. That doesn't mean, however, that more powerful options aren't under consideration. Speaking with Motoring.com.au at the launch of the new MX-5, Mazda's global PR chief Kudo Hidetoshi revealed that two options are under consideration. One would be a larger engine, and the other a turbocharged version of the existing 2.0. The former option would deliver the extra punch while keeping things naturally aspirated and free from turbo lag, but could throw off the weight balance Mazda has worked so hard to preserve. The more likely option, then, would be the turbocharged route that would allow the Zoom-Zoom brand to keep the roadster light and nimble, while still delivering an extra boost. Neither would be without its challenges, but if overcome, the resulting high-performance model could be sold as a Mazdaspeed model in some markets and as an MPS version in others. And, even if such a performance roadster were to get the go-ahead for production in some markets, there's no guarantee that it will be sold in the United States. Here's hoping. Related Video:

Sweating the small stuff | 2017 Mazda CX-5 First Drive

The 2017 Mazda CX-5's door handles got their own design study. They got their own graphs, maths, and a team of people scientifically analyzing how humans interact with them. There was a whole to-do. And yet, you look at them back-to-back with their predecessors, a Spockian eyebrow reaching to the stars, and wonder what all the fuss was about. But apparently they're better. They're also perfectly illustrative of the entire effort to re-engineer and improve Mazda's best-selling model. At first, the 2017 Mazda CX-5 seems like a sensible evolution of its well-loved predecessor – there's sexier styling, a more premium cabin, and additional features, but the dimensions and engine specs look awfully similar. It certainly looks like one of those "the old car's great, let's not overthink the new one" redesigns. Except it isn't. Dig deeper and you'll see just how much meticulous work – from the door handles to the throttle response – went into making the new CX-5 a crossover that thoroughly trounces the majority of its competition. Take the efforts to make it quieter. According to Mazda's internal measurements, the sound-quelling improvements made for the CX-5's 2016 refresh already made it one of the quietest compact SUVs on the market. That apparently wasn't good enough. To what seems like an absurd degree, Mazda's engineers obsessively examined every nook, cranny, corner, and crevice to sniff out noise and eliminate it. Gaps were filled, insulation was injected, seals were added, air was redirected, glass was double glazed, and carpet replaced plastic coverings. It would seem that the Society of Persnickety Engineers is well represented at Mazda HQ. "I'm not sure how they found some of these," said Mazda vehicle development engineer Dave Coleman with a shake of his head, almost amused by the obsession and dedication of his colleagues across the proverbial hall in the sound-deadening department. (He goes over many of their enhancements in the video below.) And it worked. The new CX-5 is indeed incredibly quiet, even on San Diego's notoriously loud corrugated concrete freeways. It is quiet for a Mazda – a brand previously known for the exact opposite – and the entire segment. Even the fairly quiet 2017 Honda CR-V we drove on the same freeways on the way to San Diego couldn't match it. Actually, much of the driving experience can't be matched by a competitor.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.