2010 Mazda Rx-8 Grand Touring Non Smoker Leather Sirius Radio Bose Sound Aux Abs on 2040-cars

Auto blog

2016 Mazda CX-5 recalled to address failing DRLs

Mazda announced Tuesday that it will recall more than 35,000 examples of the 2016 CX-5 crossover to address an issue that may lead to deterioration or failure of its LED daytime running lights.  In affected models, the gasket used to seal the wiring harness to the LED module was not manufactured to Mazda's specification. As it degrades over time, it can release sulfur, which in turn can potentially corrode the LED control circuit, causing the LEDs themselves to flicker, illuminate poorly or even fail outright.  Per Mazda, there is no alert for this condition, so drivers can potentially lose daytime running light function without realizing it, leaving them tougher to spot in poor light.  The campaign will cover 36,761 CX-5s sold in the U.S. and U.S. territories. Mazda says no accidents or injuries related to the issue have so far been reported.  This new campaign has not yet been published in the National Highway Transportation Safety Administration (NHTSA) recall database, and Mazda's statement did not include details of the proper remedy for the issue or when customers can expect to be contacted to arrange for service.  We expect that all 2016 CX-5s with LED DRLs will receive new harness gaskets and that those showing signs of LED module corrosion will have those replaced as well.  The 2016 CX-5 has been the subject of four other recall campaigns — including one for an improperly torqued steering knuckle bolt and another for a defective fuel filler pipe — but this is the first  new campaign for that model year since 2016.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

2019 Mazda Miata officially announced with 181 horsepower

It turns out the rumors and leaks are true. The 2019 Mazda MX-5 Miata will indeed get a slight performance increase. This fall, the car's naturally aspirated 2.0-liter inline-four will make 181 horsepower and 151 pound-feet of torque. That's a 26 horsepower and 3 pound-feet bump over the 2018 model. It may not sound like a lot on paper, but consider the fact that it's a nearly 17 percent increase in power in a car that weighs just 2,332 lbs. When the current ND generation debuted a few years back, the Miata actually took a slight hit to power. It was offset by a sizable weight loss program, but it didn't stop people from making a fuss. These days, it's not often that a newer model actually loses power compared to the outgoing car. The new car now makes roughly the same power as the old turbocharged Mazdaspeed MX-5 from 2004. Peak power for the 2019 model comes at 7,000 rpm while peak torque arrives at 4,000 rpm. That's 1,000 more and 600 fewer revs respectively. The Miata's redline is now 7,500 rpm, up from 6,800. It should make the car feel more lively through the rev range and should drop the car's 0-60 mph time back under 7 seconds. The 2019 model only weighs 7-pounds more than the outgoing model, so it's essentially a non-issue. In order to get the extra juice, Mazda engineers did some significant work to the engine's internals. Piston mass has been reduced 27 grams while the connecting rods are down 41 grams. The exhaust system and inner exhaust manifold have been modified to reduce pumping losses by 30 percent. The intake and fuel injectors have been changed, too. A new dual-mass flywheel replaces the single-mass unit. This should help better manage engine vibrations and responsiveness. Lastly, the final drive ratio has been increased from 3.454 to 3.583. Other gear ratios remain unchanged. There are other minor but welcome changes for 2019. The steering wheel now telescopes, a boon for drivers with long legs. The doors are easier to open and feature revised door stops. The cupholders and seat levers have both been updated. Finally, there are new 17-inch wheels and a new brown canvas soft top. How all these changes will affect the car remain to be seen. While many people have been clamoring for more power, some of us here at Autoblog feel the Miata may lose some of its current character with such a significant shift in power and torque. Either way, we're as excited as ever to get behind the wheel. Related Video:

Leaked images show digital gauge cluster for Mazda3

Most everything divulged about the 2019 Mazda3 so far has focused on the trick Spark Controlled Compression Ignition (SPCCI) Skyactiv-X engine. If a series of photos posted on a Chinese website are accurate, it looks like Mazda has novel plans for the cockpit as well. The three images show a three-color, all-digital gauge cluster in two different configurations. The first configuration places a three-digit speedo in the center of a blue-ringed tachometer, with gear indicator and water temp displays on the left, fuel range calculator and what appears to be a funky clock on the right. The second configuration splits the tachometer to the left and the speedo to the right. In between them is what looks like a road surface display for automatic cruise control. Trip info lies just under the blue-banded road, while water temp, fuel gauge, gear indicator and range info line up across the bottom. A swath of empty space on the left could be where Mazda's relocated the current car's passel of warning signals. Of note: Everything around the digital gauges appears to come straight from the current Mazda3. The instrument panel surround, the steering wheel and buttons, the stalks, all of it is lifted from today's car. If the photos are what's headed our way on some trim of the 2019 Mazda3, though, they show a clean, handsome evolution of the no-nonsense cluster in the current compact hatch. Mazda's worked up a head of good press on the run-up to the Mazda3 launch for both the engine and the dynamics. We're told we'll get between 10 and 30 percent more torque from the 2.0-liter SPCCI Skyactiv-X, and about 25 percent better fuel economy compared to today's 2.0-liter Skyactiv-G. Handling-wise, the jinba ittai philosophy — horse and rider as one — has led to engineers reworking everything from tire sidewall stiffness to multi-contoured torsion elements and the mounting and shape of the seats. The hatchback's torsional stiffness climbs by 30 percent, any excess rigidity countered by 7.5 meters of "matrix resin material" applied in 16 places on the body "to absorb vibration and dissipate it as heat." The point has been to eliminate dynamic static between the driver and the road, and then to give the driver the best natural seating position to take advantage of the body's reflexes to dynamic input. At the same time, this digital gauge cluster might also give that driver something tasty to look at. Related Video: