2005 Mazda Zoom Zoom 1.3l Rotorary Motor Rx8 Cpe Great on 2040-cars

Auto blog

Mazda files patents for a sequential twin-turbo setup

Mazda has a history of interesting engine technologies, from yesterday's rotary engine to tomorrow's compression ignition engine, and new patents show it still may have some internal combustion tricks up its sleeve. The one on display in these patents isn't especially new in concept, though. A sequential twin-turbocharger setup is something Mazda itself used on the third-generation RX-7. But it's something we haven't seen much of lately. It looks like it could have some possible advantages over older sequential systems, and it has some potential advantages for enthusiasts. First a quick and dirty primer for what makes a sequential twin-turbo system distinct from other twin-turbo systems. In many twin-turbo engines, there are simply two turbos that work together as one bigger turbo. They're the same size, and they spool up at the same time. With a sequential setup, at low rpm, a smaller turbocharger is spooled up first at low-rpm for quicker throttle response, and as the rpm and exhaust pressure increases, a valve opens up that allows a larger turbocharger to also spool up and provide high-rpm boost. That's basically how the Mazda design shown above functions. A big flap blocks off the larger turbocharger exhaust inlet, channeling all the exhaust to the smaller turbo. When more exhaust is available at high rpm, it looks like that flap opens up to spool up the big turbo, too. What's interesting here is that the way the turbochargers are packaged takes up less space than past systems. It looks like both turbos are contained in one unit that shares the same exhaust outlet, meaning the exhaust manifold could be kept simple and compact. In fact, the piping for compressed intake air could also be shared, reducing the amount of piping, which would further decrease the amount of materials and possible failure points. There are a number advantages of making this system smaller. The potential applications of the system are much greater, since it could fit in smaller cars with smaller engine bays. Making the system smaller also means that there won't be as much weight, which is important from both fuel economy and performance standpoints. Finally, the smaller setup likely uses fewer materials, which could make the system cheaper and thus easier to offer on a wider range of vehicles, or at least more profitable for Mazda.

Mazda's new turbo four fits in both the 6 and the 3

Despite the size differences, the Mazda CX-9 shares a lot with its smaller car-based siblings, the Mazda6 and Mazda3. That could allow Mazda to slot its full-sizer's new 2.5-liter, turbocharged four-cylinder engine under the hood of its smaller offerings. Pardon us while we do a happy dance. "[The 2.5-liter turbo] fits in a lot of our cars, and where we're actually going to put it is another question," Mazda North America vehicle development engineer Dave Coleman told Australia's Car Advice. Coleman specified that the turbocharged engine will fit in all the same applications that can accommodate the company's 2.5-liter gas and diesel engines. "Basically, that big space we used for the bundle of snakes exhaust manifold, the turbo is in that space too. They're all packaged to occupy the same space. It's exactly the same clearance as the exhaust manifold of the other engines." This kind of logic – if Engine A is the same size as Engine B, then both should fit in Car C – is what's lead us to imagine a turbocharged Mazda6 since the new engine was announced. In short, it's great news. Mazda's 2.5-liter turbo is a hell of an engine in the CX-9, and it's hard to imagine it'd be worse in a lighter vehicle. But just because it works from an engineering standpoint doesn't mean it's going to happen. At least, not soon. "It fits. I'm not a product planner so I don't get to make that call," Coleman told Car Advice. "It's up to the product planners to decide what they're going to put it in." The most obvious application for a turbocharged engine in the 3 or 6 is as a reborn Mazdaspeed model. But don't get too excited – Coleman said Mazda hasn't even gotten as far as building an engineering prototype with this engine. We're still firmly at the theoretical stage. And that's bad news, because it gels with what we've been reporting – that Mazda will wait a generation for future Mazdaspeed models. We just stopped doing our happy dance. Related Video:

Fiat version of Mazda MX-5 Miata to be called 124 Spider

Fiat has a definite use for its recent US trademark on the 124 Spider name, and it's something that should make many performance fans quite happy. FCA CEO Sergio Marchionne confirmed to Auto Express that the Italian brand's future roadster would bear the classic name. Auto Express reportedly asked Marchionne directly about the convertible at the 2015 Geneva Motor Show. The CEO said: "Do we want to do it now?" After another executive verified the name, Marchionne responded: "There you go – a world class premiere right in this room!" Autoblog reached out to Fiat Brand communications boss in the US Ariel Gavilan for more information, and he verified the story. Gavilan said that brand head Olivier Francois confirmed the 124 Spider name to international media during a briefing in Geneva. FCA isn't going quite so far as officially confirming that the 124 Spider shares a platform with the latest Mazda MX-5 Miata, but that's almost a certainty. The two automakers jointly developed the chassis, and the original plan was for it to underpin an Alfa Romeo. However, Marchionne didn't want an Alfa assembled outside of Italy. Fiat even hinted at this possible change as far back as the corporation's five-year plan last summer. Insiders tell Auto Express that the 124 Spider reportedly carries retro-inspired style, and hopefully, that means the roadster evokes the look of the original 124 Sport Spider (pictured above) by Pininfarina. Fiat allegedly is also aiming for a weight less than 2,205 pounds, and the engine range is likely comprised of versions of the brand's 1.4-liter turbo. The mill already pumps out 160 horsepower and 183 pound-feet of torque in the Fiat 500 Abarth in the US. According to Auto Express, Fiat and Mazda have an agreement to launch the Miata in 2015 and the 124 Spider in 2016. A hotter Abarth version could come along eventually, too. Related Video: