2005 Mazda Rx-8 Base on 2040-cars

Auto blog

2020 Mazda CX-30 small crossover lands an IIHS Top Safety Pick rating

The 2020 Mazda CX-30 has come out of the gate swinging on the safety front, earning the Insurance Institute for Highway Safety (IIHS) Top Safety Pick award in its first year on the market.  Mazda's new baby crossover earned a "Good" rating in all six of the Institute's crashworthiness categories (driver-side small overlap front, passenger-side small overlap front, moderate overlap front, side, roof strength and head restraint) and its accident avoidance system was rated "Superior." Sadly, only one set of available headlights was rated "Acceptable" or better, which kept the CX-30 out of the running for the coveted Top Safety Pick+ award. The best-rated lamps available on the CX-30 are actually those that come standard. The curve-adaptive units offered as an optional upgrade were rated "Poor" due to excessive glare. For 2020, IIHS made the guidelines for earning Top Safety Pick and Top Safety Pick+ awards even more stringent. Up until 2019, cars needed only to earn an "Acceptable" rating in the passenger-side small overlap test to qualify for a Top Safety Pick. For 2020, that has been raised to "Good."   The bigger challenge for many OEMs will be headlights. To earn Top Safety Pick+, a vehicle cannot be sold with any headlight configuration that does not earn at least an "Acceptable" rating.    So far, fewer than two dozen 2020-model-year vehicles for sale in the U.S. have met the criteria for Top Safety Pick+; roughly half again as many qualify for the lesser award. In coming years, the Institute is expected to add even more conditions, especially in the realms of accident avoidance and pedestrian safety. 

1993 Mazda RX-7 Retro Review | A '90s hero turns 25

Boom times build interesting cars. In the late 1980s, Japan was flush with capital, and automakers spent like the party was never going to end. Suddenly building the third-generation RX-7 — the world's most advanced twin-turbo rotary sports car — seemed like the most natural thing a small car company hailing from Hiroshima could do. On this side of the Pacific, however, there was no context for the sudden influx of unusually tricked-out Japanese hardware flooding American dealerships. And none of the Japanese sports cars of the era was more unusual than the FD-generation Mazda RX-7, imported from 1993 to 1995 (and continuing on in Japan until 2002). Although the island nation's economy was headed on a downward spiral by the end of 1990, Mazda was in no position to pull back and walk away from the development dollars that had already been spent on its latest RX-7. As a result, Americans were able to briefly bask in the glow of one of the most unique engineering experiments ever unleashed on unsuspecting buyers. For its time, the Mazda RX-7 was a spaceship. With fluid lines that screamed "exotic," it joined the NSX in showing that supercars didn't have to have European blue blood running in their cooling systems to elegantly snag eyeballs. The twin-rotor, 1.3-liter 13B-REW situated behind the RX-7's front axle revved all the way to 8,000 rpm on its quest to produce 255 horsepower and 217 pound-feet of torque, with a pair of sequential turbos handing boost duties back and forth around the 4,500 rpm mark. A five-speed manual gearbox was standard with the FD (a four-speed automatic was optional), as was a curb weight in the neighborhood of 2,800 pounds — nearly 500 lbs less than the contemporary Toyota Supra. Significant figures for the era, to be sure. While they might pale in comparison to the average sports car today, slide into the RX-7's cockpit and drive the car, rather than just crunch the numbers. You'll quickly discover what can be accomplished when the company that engineered the Miata pulls a full John Hammond and "spares no expense" developing a world-beating sports car platform. The 1993 Mazda RX-7 I've been loaned from Mazda's classic collection is an R1 car, which means tighter suspension tuning, a few cosmetic upgrades, and a Competition Yellow paint job.

Alfa Romeo takes Spider in-house, Mazda-Fiat roadster partnership not dead

It's officially off. Following a report in March of this year that the marriage of Mazda and Alfa Romeo to produce a MX-5-based Spider was in trouble, the Italians have confirmed that it will take development in-house. "As far as the Spider goes, the final version is of course no longer the two-seater FCA co-developed with Mazda but a derivative of Project Giorgio," Maserati and Alfa Romeo brand boss Harald Wester told Car. For those not in the know, Project Giorgio is Alfa's codename for the rear-drive platform that will underpin the next-generation Spider, not to mention the replacement for the 159 sedan and a few other products. All is not lost for the Japanese-Italian partnership, though. "The Far East import will probably find a new home with Fiat-Abarth," Wester told Car. Yes, you read that correctly, Mazda is still working with FCA, and the result will eventually end up with Abarth's scorpion badge. If anything, we're more excited over this news than the idea of an Alfa MX-5. But we want to know what you think – would you rather Alfa build a new Spider on the Miata's bones, or does an MX-5 Abarth sound like more fun? Have your say in Comments.