2004 Mazda Rx-8 ***** Low Miles****6-speed on 2040-cars

Auto blog

Mazda plans to launch an EV in 2020, plug-in hybrid by 2022

Thanks to an interview Automotive News Europe conducted with Mazda president and CEO Akira Marumoto, we have more insight on Mazda's plans to lower its vehicle emissions in Europe. This will undoubtedly bring changes to the U.S. lineup, too, but The Continent sees the first fruits in part because Mazda is well over the European Union's fleet CO2 emissions target for 2021 of 95 g/km. In response to how Mazda plans to achieve the necessary reduction, Marumoto said the carmaker will launch its first EV in 2020 and have a plug-in hybrid on the road in 2021 or 2022. First, some clarification on the emissions numbers and timeline. The 95g/km figure is based on the New European Driving Cycle (NEDC) emissions schedule being phased out next year; the AN piece cites JATO Dynamics findings that Mazda Europe's fleet CO2 average is 135.2 g/km. The new Worldwide Harmonised Light Vehicle Test Procedure (WLTP) schedule comes into full effect in 2020, the fleet CO2 target under that methodology translating to 114.9 g/km. The rules dictate that 90 percent of an automaker's range needs to meet the cap number by the end of 2020, the rest of the lineup must come into compliance by the end of 2021. Failure means enormous fines. Industry analyst IHS Markit estimates "average fines for those not complying could reach ˆ624 ($707) per vehicle at the end of 2020, with a further ˆ190 ($215) increase in 2021." The penalties quickly grow so large that Fiat will reportedly pay Tesla hundreds of millions of euros to pool their fleets and avoid an even larger bill. Mazda's most popular vehicle in Europe is the CX-5 with CO2 emissions ranging from 128 g/km to 150 g/km. On top of that, for a small automaker, the size of potential fines has material effect on the R&D budgets necessary to develop the technologies that will lower emissions, and whatever EV Mazda launches in 2020 needs to sway legions of customers into purchases to be of practical use. This will be challenging. A line in the IHS Markit summary about the industry in general states, "Once in 2021 and subject to full WLTP regulatory monitoring, only a seismic shift (over the baseline) in consumer demand for BEV ('Electric-Plug-In') and PHEV ('Hybrid-Full Plug-In) will result in the full mitigation of EU28 fleet level excess emissions premiums." Mazda hooked up with Toyota and Denso in 2017 on a joint venture called EV Common Architecture Spirit Co Ltd to develop EV technology.

Mazda's rotary engine may live on as a range extender (UPDATE)

Update: We received a response from Mazda that confirmed plans for a 2019 electric car available in battery-only and range-extended models, but there was no comment on any other details. The text has been updated to reflect this. It may be time for rotary fans to start getting their hopes up a little for a return of the spinning triangle engine. Automotive News spoke with Mitsuo Hitomi, the man in charge of Mazda powertrains, who said there's a very good chance the next implementation of the rotary engine will be as an electric car range extender. The news source also suggests that such a vehicle could be just around the corner, since Akira Kyomen, Mazda's vehicle development program manager, confirmed to Automotive News that the company will have an EV out in 2019 in both pure electric and range-extended versions. We reached out to Mazda for more information, and a representative confirmed both the pure electric and range-extended models for 2019, but couldn't comment on anything else regarding those vehicles. Looking back, we have reason to believe that this really might happen. As far back as 2013, Mazda was working on a rotary-engine range-extended electric car in the form of the Mazda2 RE Range Extender. It had a total range of 250 miles, half of which came from its battery, the other half from a 330 cc rotary engine generator fueled by a 2.6-gallon gas tank. More recently, Mazda has also teased rotary power with the RX-Vision concept at the 2015 Tokyo Motor Show and another rumored rotary concept at this year's show, which could be the design concept teased recently. But most convincing is the patent we found from Mazda that described a range-extended electric car that would specifically use a rotary engine. The powertrain layout looks just like the one used in that Mazda2 concept. There's also the fact that, as we've previously pointed out, and as Hitomi mentioned to Automotive News, the rotary could be a good range-extender due to its compact size and smoothness. Of course it also isn't known for being the most efficient engine, but if it isn't required to provide all the forward propulsion, it could be made small enough that it's frugal, and the added space and weight savings would be important for making the vehicle more practical, adding more batteries, or simply keeping the car lighter. This news might not excite rotary die-hards who have been waiting for an RX-7 and RX-8 successor, but they shouldn't quite abandon hope yet.

The 2020 Mazda CX-30 will start at $22,945 with 2.5L power

We saw the CX-30 debut in Geneva earlier this year, and now Mazda has made its U.S. specification and pricing official. To get right down to it, the new crossover that splits the small end of the company’s crossover lineup will start at $22,945. We also have some solid information about spec and trim levels for our market, with some notable differences to how it can be equipped in Europe in particular. For one, like the latest Mazda3, it can only be equipped with a 186 horsepower 2.5-liter engine (naturally-aspirated, to be clear). Europeans can get a range of engines, and our neighbors in Canada and Mexico can get a 2.0-liter gas engine. A six-speed automatic is similarly our only transmission choice. All trims are available with front- or all-wheel drive. No word on whether the (somewhat underwhelming) Skyactiv-D diesel or (rather incredible) Skyactiv-X compression-ignition engines will be available. The materials Mazda provided us ahead of the CX-30Â’s U.S. debut focus heavily on the vehicleÂ’s standard equipment, including the now standard Mazda Connected Services — offering a variety of remote functionality and monitoring via the MyMazda app. Nothing you wouldnÂ’t expect from this sort of connectivity feature, including remote start and lock/unlock, as well as a WiFi hotspot (via Verizon, which is the parent company of Autoblog) and emergency assistance calls. Note that itÂ’s a three-year free trial; after that it becomes a subscription service, with a price weÂ’ll share with you once we learn it. There are four trims for the CX-30. The base model has some decent standard equipment: an 8.8-inch infotainment display, automatic headlights and the standard i-Activsense safety suite including driver inattention alert, radar cruiser control, lane departure warning with lane keeping assist, emergency braking assist and automatic high beams. Notably, blind spot monitoring is not available in the base model; buyers will have to step up to the next trim, Select, to get that safety feature. WeÂ’re disappointed that itÂ’s not standard across the board. So too with Apple CarPlay and Android Auto, also only available on Select and above. The Select trim is $24,945, and provides those features mentioned above as well as leatherette seats, keyless entry and 18-inch wheels. The Preferred trim ($27,245) provides upgraded audio, heated front seats, a power driver seat, a black gloss grille and a SiriusXM trial.