1987 Mazda Rx-7 Base Coupe 2-door 1.3l on 2040-cars

Auto blog

Mazda3 versus BMW 1 Series and Audi A3 in Euro diesel showdown

It's not exactly a Tesla Model S taking on a Ferrari, but for us green enthusiasts, a drag race and comparison between reasonably priced diesel hatchbacks does hold interest, and UK's Auto Express was kind enough to do the deed. When raced, the diesels actually laid a little rubber coming off the line, though the track was covered in rain. Did we mention it was in the UK? The comparison was between diesel hatchbacks priced at less than 22,000 British pounds (about $34,500 US), and Auto Express pitted a Mazda3, a BMW 1-Series and an Audi A3 against each other. The results are revealed in the 11-minute video you can watch below. In short, one car smoked the others. In order to set the tone, you should know that the Mazda's 150 horsepower is about 35 more than the other two entrants. The Mazda also earned points for its quiet motor (it sounds more like a petrol engine, the host says), standard equipment that would add about $4,000 to the other two cars if included and relative roominess in front and in back. The Audi gained points for its storage space, while the BMW had the only rear-wheel-drive car in the hunt. See for yourself how the competition stacks up. News Source: Auto Express via YouTube Green Audi BMW Mazda Diesel Vehicles bmw 1-series Auto Express

Mazda files patents for a sequential twin-turbo setup

Mazda has a history of interesting engine technologies, from yesterday's rotary engine to tomorrow's compression ignition engine, and new patents show it still may have some internal combustion tricks up its sleeve. The one on display in these patents isn't especially new in concept, though. A sequential twin-turbocharger setup is something Mazda itself used on the third-generation RX-7. But it's something we haven't seen much of lately. It looks like it could have some possible advantages over older sequential systems, and it has some potential advantages for enthusiasts. First a quick and dirty primer for what makes a sequential twin-turbo system distinct from other twin-turbo systems. In many twin-turbo engines, there are simply two turbos that work together as one bigger turbo. They're the same size, and they spool up at the same time. With a sequential setup, at low rpm, a smaller turbocharger is spooled up first at low-rpm for quicker throttle response, and as the rpm and exhaust pressure increases, a valve opens up that allows a larger turbocharger to also spool up and provide high-rpm boost. That's basically how the Mazda design shown above functions. A big flap blocks off the larger turbocharger exhaust inlet, channeling all the exhaust to the smaller turbo. When more exhaust is available at high rpm, it looks like that flap opens up to spool up the big turbo, too. What's interesting here is that the way the turbochargers are packaged takes up less space than past systems. It looks like both turbos are contained in one unit that shares the same exhaust outlet, meaning the exhaust manifold could be kept simple and compact. In fact, the piping for compressed intake air could also be shared, reducing the amount of piping, which would further decrease the amount of materials and possible failure points. There are a number advantages of making this system smaller. The potential applications of the system are much greater, since it could fit in smaller cars with smaller engine bays. Making the system smaller also means that there won't be as much weight, which is important from both fuel economy and performance standpoints. Finally, the smaller setup likely uses fewer materials, which could make the system cheaper and thus easier to offer on a wider range of vehicles, or at least more profitable for Mazda.

Fiat 124 spied with top down

With fall officially here, the days are rapidly running out for much of the country to put the top down and enjoy a convertible. Fiat apparently wants to take advantage of the good weather while it lasts, given these fresh spy shots of the 124 Spider testing with the roof down. In terms of styling, these photos show the droptop with an extremely similar look to the ones from July. The roadster still appears to have rounded headlights and a wide grille up front, which the kidney-shaped cladding does nothing to hide. The hood bulge continues to be there, too, and so is the spiderweb-pattern camouflage. However, these new shots let us check out the roll hoops that are visible with the top out of the way, and we even get to see the manual roof in operation. Also, note there are now dual exhausts at the rear, rather than the quad tips from before. Underneath all this camo and cladding, we know that the 124 Spider shares underpinnings with the new Mazda MX-5 Miata. The engine remains a mystery, but competing rumors suggest the 1.4-liter turbocharged four-cylinder from the current 500 Abarth or the 1.7-liter turbo four from the Alfa Romeo 4C. Thankfully, an answer might not be too far away because the roadster is mooted to debut this year, possibly at the Los Angeles Auto Show in November. With the latest Miata receiving high praise from critics, the motoring world soon gets to find out whether Fiat can find any room for improvement. Related Video: