1985 Mazda Rx7 Gsl-se on 2040-cars

Auto blog

2019 Mazda CX-9 improves its IIHS rating to Top Safety Pick +

The 2019 Mazda CX-9 three-row crossover has managed to improve its overall safety rating from the Insurance Institute for Highway Safety from an already respectable Top Safety Pick to the higher Top Safety Pick +. The area it needed to improve was in the headlight department, and now the crossover features a set of headlights that gets the highest "Good" rating, a prerequisite for the Top Safety Pick + award. The headlight improvement does have caveats. The top-rated headlights are only available on Signature and Grand Touring trims built after June 2019. Headlights on other trims and older models range from "Poor" to "Acceptable." All versions of the CX-9 have top scores in crash tests, though. Mazda's optional forward collision prevention system also earns full marks, stopping the crossover before hitting a car at speeds up to 25 mph. Child seat LATCH anchor access is rated as "Acceptable." Four other similarly sized and priced crossovers earn the Top Safety Pick + designation: the Hyundai Palisade, Hyundai Santa Fe, Subaru Ascent and Kia Telluride. And of those, only the Pallisade, Ascent and Telluride offer three rows of seating.

More head-up displays are coming to a dashboard near you

With the exception of Apple products — $1,000 for a freakin' smartphone? — one great thing about tech is you typically get more for your money with each passing year. This is particularly true with automotive tech: Features like driver assists and surround-view cameras that were once exclusively available in luxury vehicles now come standard even on some economy cars. The same thing is slowly happening with head-up displays (HUD). For example, the 10-inch HUD in the 2018 Toyota Camry is one of the largest and best HUDs I've seen in any car. And a big improvement on the much smaller HUD in the latest Toyota Prius. Mazda is another mainstream brand that offers HUDs in several of its vehicles. But instead of embedding expensive components in the dash and using a special windshield, the HUDs in the Mazda3 and Mazda6 use a thin plastic lens that folds down when not in use. MINI has a similar solution, but this low-cost approach has limits in terms of size and position of the images compared to traditional HUDs that use the windshield as a screen. We're also starting to see similar lens-based aftermarket options that can be added to any car. Last year I tested a portable HUD called Navdy that taps into a car's OBD-II port to provide info on speed and RPM and uses built-in GPS and Google Maps to show the surrounding area, display speed limits and route you to your destination. Navdy also connects to an Android or iOS smartphone via Bluetooth to display data from phone calls, texts and music playing on a connected device, and it's simple to use and easily visible in almost any lighting condition. While Navdy is still available online, late last year the company ran into financial difficulties, and product support has been halted. I recently tested a new portable HUD called Hudly that's not quite fully baked and falls short of Navdy because it doesn't tap into an OBD-II port. Since a companion smartphone app for Hudly isn't scheduled to launch until next month, for now it only mirrors what's on a smartphone. So it can be used for nav and other apps, and its features are very limited. Between automakers adding HUDs in more reasonably priced cars and the aftermarket filling in the gaps for existing vehicle owners with add-ons, the technology is becoming more prevalent and affordable. And it's also getting better.

Mazda RT24-P brings KODO style to the Rolex 24 at Daytona

In addition to its new CX-5 crossover, Mazda revealed its new racecar, the RT24-P, at the Los Angeles Auto Show. The car has been designed for the Daytona Prototype international (DPi) class in IMSA's WeatherTech SportsCar Championship and will make its racing debut at the Rolex 24 at Daytona. It was designed using Mazda's KODO design language, which the brand has so successfully applied to its road-going cars. The racer's relation to Mazda's production cars is made obvious by the small five-point grille at the tip of the RT24-P's nose. While plenty of credit needs to go to the stylists and aerodynamicists at Mazda and Multimatic, one of the companies Mazda partnered with on the car, some of the credit needs to go to IMSA's new DPi rules for 2017. The new DPi class is very similar to the LMP2 class that it competes with in the WeatherTech series, with some noteworthy differences. The DPi class allows manufacturers to create unique bodies and engine packages for one of the four chassis available. The LMP2 class requires competitors to use the chassis companies' bodies, and are restricted to one engine package. View 14 Photos As for the powertrain, the Mazda RT24-P uses a turbocharged 2.0-liter four-cylinder that puts out roughly 600 horsepower. Mazda used the same engine in its P2-class race car last season. Mazda's body and engine will ride atop a chassis developed by Riley Technologies and Multimatic. You may remember that latter company as the one that developed the awesome spool valve shocks on the Chevrolet Colorado ZR2. The RT24-P will be campaigned by Speedsource, a company that has been racing Mazdas in American endurance racing for years, including last year's P2 cars. Considering Mazda's success in making such a cool race car, we're excited to see what other manufacturers do with the extra design freedom of the DPi class. Both Chevrolet and Ford competed last year in the WeatherTech prototype class with Daytona Prototype-style cars, and Honda competed with an LMP-style racer. Depending on what other makes decide, this year's WeatherTech line-up could have some nifty designs. Related Video: Related Gallery 2017 Mazda RT24-P race car View 9 Photos News Source: Mazda, IMSAImage Credit: Live photos copyright 2016 Drew Phillips / Autoblog Motorsports LA Auto Show Mazda Racing Vehicles Videos Original Video 2016 LA Auto Show