1984 Mazda Rx-7 Gs Coupe 2-door 1.1l Rotory on 2040-cars

Auto blog

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

Mazda planning not one but two new crossovers for U.S.

Mazda has already announced plans to unveil a brand new crossover at the Geneva Motor Show, but it turns out there's another one in the pipeline set to satiate the appetites of a crossover-mad U.S. market. Speaking at the Chicago Auto Show, Mazda North America CEO Masahiro Moro told reporters the brand has another model planned for production at the $1.6 billion plant under construction with joint-venture partner Toyota in Huntsville, Ala. It'll be "a new crossover SUV which is exclusively designed for the North American market," Automotive News quoted Moro as saying. While it'll be a different product from the one debuting next month in Geneva, the two vehicles will share some architecture. The company is reportedly still finalizing the concept for it. Currently, Mazda sells three crossovers in the U.S.: the subcompact CX-3, the compact CX-5 and the larger CX-9. Together, the three vehicles, which constitute half of the tiny automaker's vehicle lineup, posted sales of 195,778 for 2018, up 15.8 percent from 2017. They accounted for nearly two-thirds of the brand's total vehicle sales of 300,325. Production is expected to start at the new Alabama plant in mid-2021, Moro said, and add capacity for 150,000 units of crossovers. The plant is expected to employ up to 4,000 workers with a total capacity of 300,000 vehicles a year. Toyota plans to build the Corolla there alongside Mazda's crossovers. Mazda last week released the teaser pic shown above of its forthcoming new crossover headed for Geneva. It could be the next and slightly larger version of the CX-3, which will use the Skyactiv Vehicle Architecture that also supports the new Mazda3. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Electric Miata smokes Tesla Model S at the track

Yes, folks, you read that headline right. A souped up battery-electric version of a Mazda Miata took down a Tesla Model S on a quarter-mile drag strip. And it wasn't even close. Road Test TV was kind enough to post a video of a forest-green Miata (and its very stoked driver) doing a quarter-mile run in a rather brisk 9.27 seconds, beating the Model S sedan by a whopping 3.5 seconds in the process. And the Mazda crossed the finish line moving at 142 miles per hour, or 40 miles per hour faster than the Tesla was going when it finished the race. It's a good thing for the Tesla owner that they weren't racing for pink slips. Granted, the comparison is probably an unfair one because the Tesla was a stock, production vehicle (the P85 Performance model, but still), whereas who knows how the Miata was juiced up and how much cash it took to do the job. It's sort of like putting, say, an automotive writer against Usain Bolt because we ate the same breakfast and share 99 percent of our DNA. Still, the video does lend a certain credence to the idea that a battery-electric, super-light, rear-wheel-drive Miata would be a lot of fun, or at least a heck of lot more fun than any other Mazda out there. We're just sayin'. Check out the 100-second video below, and remember not to blink. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.