1980 Mazda Rx7 46k Miles 44phh Mikuni Sidedraft Old Enkei Hugger Tires Rare Find on 2040-cars

Auto blog

100k Mazda6 sedans recalled over tire-monitoring systems

A tire pressure monitoring system (TPMS) is, as you might have guessed, designed to monitor the air pressure in the tires, and alert the driver if pressure drops. But a problem found in the Mazda6 could keep the system from doing its job. According to the recall notice issued by the National Highway Traffic Safety Administration, the TPMS in the Mazda6 might not recognize a loss in tire pressure if all the tires slowly deflate at the same time. Under-inflated tires, it goes without saying, could increase the risk of a crash. As a result, Mazda is recalling 99,711 examples of the 2014-2015 Mazda6 to have the system's software updated. RECALL Subject : Tire Pressure Monitoring System/FMVSS 138 Report Receipt Date: OCT 27, 2014 NHTSA Campaign Number: 14V675000 Component(s): TIRES Potential Number of Units Affected: 99,711 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2014-2015 Mazda6 vehicles manufactured October 25, 2012, to October 10, 2014. If the pressures of four of the tires on an affected vehicle gradually drop at the same time, the tire pressure monitoring system (TPMS) may not warn the driver of the drop in pressure. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) No. 138, "Tire Pressure Monitoring System." CONSEQUENCE: A vehicle that is driven with under inflated tires may experience a sudden tire failure, increasing the risk of a crash. REMEDY: Mazda will notify owners, and dealers will update the TPMS software, free of charge. The recall is expected to begin on December 10, 2014. Owners may contact Mazda customer service at 1-800-222-5500. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

What a 181-horsepower 2019 Mazda MX-5 Miata means for us, and you

Last month, we reported on a VIN filing dug up by Road & Track that showed that the 2019 Mazda MX-5 Miata's 2.0-liter Skyactiv-G engine would get a power bump, from 155 to 181 net horsepower. As for how the 2019 Miata would make that extra power, we heard rumors it'd utilize a new cylinder head allowing higher revs, accounting for that extra power. Now we have what appears to be a leaked document from Mazda Canada showing exactly where that extra power comes from. According to the document posted at Miata.net (registration required to see the image), Mazda will alter camshaft lift and valve size on both the intake and exhaust side, fit freer-flowing exhaust, and smooth and enlarge the piping on the air intake side. There are also internal engine modifications: lighter pistons with lower crowns for better swirl in the combustion chamber, lighter connecting rods, and a crankshaft balanced for higher-RPM operation. All those extra revs mean extra vibration and noise, so Mazda will ditch the single-mass flywheel for a "low-inertia" dual-mass flywheel – which will attempt to find a nice balance between DMF damping action and SMF directness. Overall, it's a pretty serious engine revision with some driveline changes that will heavily affect the driving characteristics of a fantastic driver's car. Contributing Editor James Riswick and Senior Editor Alex Kierstein, both well versed in Miatas past and present, are here to analyze what this could mean for the little roadster. James Riswick: I don't know much about them lighter crank combustion rods, but I for one welcome the news of more power to the Miata. The jump from 155 to 181 seems like a very prudent Mazda-like thing to do, accomplishing that task through various aforementioned technical wizardry as opposed to slapping on a turbocharger, exclaiming "yee-hah" and calling it a day. Alex Kierstein: That's true. I'm wary of additional power, but you do make a good point that at least this is the right way to do it. Going all-motor will keep the bright responsiveness of the engine intact. But higher revs might make power delivery peakier. Frankly, I'd be ok with moving the torque and horsepower peaks up a bit in the rev range, making it a bit more work to access the engine's sweet spot. The dual-mass flywheel should also help if low-end torque suffers, so less stalling in traffic. JR: Did wonders in the 911 and 718s.

More 2019 Mazda MX-5 Miata 30th Anniversary editions are heading to America

The 2019 Mazda MX-5 Miata 30th Anniversary edition made its debut a few months back at this year's Chicago Auto Show. The special model was limited to just 3,000 units worldwide, with just 500 heading to the U.S. Miata enthusiasts were so excited by the car that the entire allotment sold out within four hours. To help satisfy demand for this limited edition model, Mazda is allocating another 143 cars for the American market, bringing the total number of cars heading to the U.S. to 643. Note, Mazda is still only building 3,000 cars total. The 30th Anniversary Miata is available as both a roadster and the retractable hardtop Miata RF. All of them will be painted Racing Orange and will be fitted with RAYS ZE40 17-inch forged alloy wheels, orange Brembo brake calipers and Recaro seats. The cars also come with a Bose audio system, Apple CarPlay and Android Auto. The cars still retain the 2019 Miata's updated 2.0-liter inline-four making 181 horsepower and 151 pound-feet of torque. Cars equipped with the manual transmission get a limited-slip differential, Bilstein shocks and a front shock tower brace. This special edition isn't cheap. The manual soft top starts at $35,915, and the manual RF starts at $38,515. Adding an automatic ups the price by $499 on the soft top and $400 on the RF. That's up from $27,080 for a base roadster and $32,945 for a base Miata RF.