'84 Mazda Rx-7 Scca Racecar Ita Its Midwest Council on 2040-cars

Auto blog

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7

2018 Mazda6 refresh takes the car further upmarket

The 2018 Mazda6 is, on the surface, a very mild refresh. The front grille has been given more depth, and the fascia is generally cleaned up a bit, putting the design inline with the new CX-5 and future Mazda products. The interior has been given the same treatment: cleaned up and modernized. But throughout the car, some important updates under the skin make the 6 a more compelling product, and one that continues the company's push upmarket. The biggest change has already been partly revealed, and that's the addition of Mazda's turbocharged 2.5-liter four-cylinder. It's the same engine found in the CX-9, and Mazda has now revealed it will make the same 250 horsepower and 310 pound-feet of torque with premium fuel. The engine will also happily accept 87-octane, in which case the engine will make 227 horsepower. Though the addition of this engine is welcome, we're a bit disappointed to learn that it will only be available with a six-speed automatic transmission. If we're lucky, we might see Mazda add a manual option, since when Mazda launched the current Mazda3, the larger 2.5-liter engine was initially only available with an automatic. But try not to get your hopes up too high, either. The good news is that Mazda will continue to offer a manual transmission as well as an automatic with the base, naturally aspirated 2.5-liter four-cylinder. This engine will now feature cylinder deactivation, as will the 2018 Mazda CX-5. This system will shut off the cylinders on each end at cruising speed to improve fuel economy. Official fuel economy ratings for both engines have yet to be released. Aside from the powertrain, Mazda says it has made a few other mechanical improvements. The suspension has been retuned, and the steering rack rigidly mounted to the chassis to improve handling. Thicker sheet metal for the rear wheel wells, thicker trailing arms, and a bevy of braces have also been added in order to reduce noise for a more refined driving experience. The interior has also been updated for more refinement, particularly on the new Signature trim model. The sleeker interior design on all Mazda6s is joined by redesigned seats Mazda says are more comfortable. Those seats are now available with optional ventilation. A windshield-projected heads-up display, adaptive cruise control that can bring the car to a stop and resume accelerating, as well as an instrument panel with a configurable 7-inch screen are other options.

2016 Mazda MX-5 Miata 2.0L First Drive [w/video]

The 2016 Mazda MX-5 Miata is easy to comprehend. It is an enthusiast roadster in its purest form. There's no need for any sort of sales pitch. You don't have to ramp up in order to get people excited about it. Say the words "new Miata" to anyone who cares about cars, and you've immediately got their attention. And now that I have yours, I'll to cut right to the chase. It's brilliant. That's a fact I've known for a while. I drove the Japanese-spec ND Miata in Spain earlier this year, with the 130-horsepower, 1.5-liter engine that we aren't getting in the United States. The new Miata is a modern day reincarnation of the original NA that stole our hearts in 1989. It's smaller and lighter than the outgoing NC, yet boasts more interior room. It's comfortable. It looks great. And it drives like a Miata should. In other words, it's perfect. So what about this US-spec car, then? It's got more power – 155 horsepower and 148 pound-feet of torque from Mazda's 2.0-liter Skyactiv four-cylinder engine. But it's also heavier. Our car weighs 2,332 pounds, compared to the roughly 2,200 pounds of the 1.5-liter car. Yes, the ND Miata loses 12 hp compared to the outgoing NC, but it's up 8 lb-ft of torque. Plus, according to Mazda, because of the improved powerband, anytime you're under 5,700 rpm the new Skyactiv engine is stronger than the old MZR mill. It's more efficient, too. With the manual transmission, the Miata is estimated to achieve 27 miles per gallon in the city and 34 mpg highway. That a jump of six mpg in both categories compared to the old six-speed. Consider this: The Japanese-spec car uses a 130-hp engine, which I found to be perfectly adequate. The increase in power for the US-spec car mostly just balances out the extra weight, but it also improves performance on the highway. Hit the throttle in sixth gear with the 1.5 and nothing happens. Do the same with the 2.0, and there's movement. Low-end power is far more important in the US than it is in other markets, and that's why our car has the larger engine. "North America is why the two-liter car exists," engineer Dave Coleman told me. Plus, 155 hp power means you eke out the Miata's dynamics at legal speeds. 45 miles per hour in an MX-5 is a far more exhilarating experience than that same speed in any supercar. So yeah, it's not powerful. But to paraphrase Jay-Z, the MX-5 is a super car, not a supercar.