on 2040-cars

Auto blog

Mazda's Skyactiv-X power and efficiency ratings released in Europe

Mazda's long-awaited Skyactiv-X engine is finally headed for production, though not yet for the United States. The Japanese automaker says "various European countries" will get access to the unique engine in the Mazda3 starting this fall. Still, the announcement is relevant to the rest of us because we now have official power levels and fuel efficiency numbers that we can use to compare the Skyactiv-X with other engines offered in the compact Mazda. First, the power. According to Mazda, the 2.0-liter Skyactiv-X makes 178 horsepower and 165 pound-feet of torque. By way of comparison, the 2.5-liter Skyactiv-G engine currently used in the Mazda3 here in the States makes 186 hp and 186 lb-ft of torque. Sure, it's a little less powerful, but note that the displacements don't match and remember that the real reason the Skyactiv-X exists is to reduce fuel consumption. And that brings us to the Skyactiv-X's combined rating of around 53.5 miles per gallon (converted from liters per 100 kilometers). That's around 8 mpg better than the 2.0-liter engine that comes standard in Europe. Before we go any further, it's important to note that these numbers represent official figures for the European NEDC combined cycle, which means they are not directly comparable to the ratings we'll get from the United States EPA. Our official ratings will almost certainly be lower. With that disclaimer out of the way, the 2.5-liter Mazda3 scores a combined 30 mpg here in the States. The obvious unanswered question is when the Skyactiv-X might actually come to America. And the unfortunate answer is that we don't know. Mazda has yet to make an official decision on timing for the U.S market's launch of the engine, but as soon as we know, so will you.

2014 Mazda6 recalled due to fuel overfill fire risk

Mazda is recalling 19,000 Mazda6 sedans from model year 2014, over concerns that the fuel tanks can be filled up too much. What is it with Mazda and fuel tanks?
The big concern is, obviously, spillage when filling up. There's also a risk that a radical temperature swing could cause the fuel volume to expand, causing a full tank to spill over without the driver knowing about it. According to the National Highway Traffic Safety Administration bulletin, if the fuel spills over, it could end up in something called the charcoal canister, which helps with the car's emissions. If it fills up the canister, it could leak out onto the road. None of this is really desirable.
The affected vehicles were all built between October 25, 2012 and May 9, 2013. It's unclear if there have been any fires due to this problem. Dealers should have been notified by now, while owners should begin receiving official recall notifications very soon.

50 engineers kept the rotary alive at Mazda for 8 years

The Mazda RX-Vision concept is one of the standouts at this year's Tokyo Motor Show thanks to a drop-dead gorgeous design and a revival of the Wankel engine. The fact that the rotary is still in development at Mazda is thanks to a dedicated group of 50 engineers. According to Automotive News, their dream for the last eight years has been to bring this storied engine design back to the street. It won't be easy. Because of its design, the rotary suffers from poor fuel economy and high emissions. Making the challenge even harder, Mazda reportedly only gives them a small budget, but they continue to chip away at the problem. "These 50 engineers want to develop the rotary engine, therefore they joined Mazda," company research and development boss Kiyoshi Fujiwara told AN. "If I stop the rotary engine, probably they want to leave." For the Skyactiv-R under the RX-Vision's svelte hood, the team reportedly started from the 16X rotary project. Dating back to 2007, that 1.6-liter engine was supposed to improve torque and fuel economy thanks in part to direct injection. After additional development, insiders even suggested that the engineers might have finally solved the powerplant's issues. However, Mazda never put the mill into production, and the RX-8 remains the company's last Wankel-powered model to be offered in showrooms. "We have a dream that one day, this design with a rotary engine will achieve a level that customers will accept," CEO Masamichi Kogai said to AN. Mazda is quite clear that the RX-Vision might never go on sale without a suitable rotary. Although if it does see production, the coupe would likely use a stiffened version of the Miata's chassis, AN reports. Before anyone can place an order, these 50 determined engineers still have a lot of work ahead of them. Related Video: