2008 Mazda 6 Sedan Silver 4 Door Clean on 2040-cars

Auto blog

Mazda CX-30 crossover will have its U.S. debut at L.A. Auto Show

After debuting at the Geneva Motor Show earlier this year, the Mazda CX-30 is ready to relocate to the U.S., and is now preparing to meet its future compatriots at the LA Auto Show. The small crossover — whose name is a workaround due to the Chinese-market CX-4 crossover — is five inches longer than the new Mazda3 hatchback and five inches shorter than the CX-5 crossover. Its appeal is intended to be a mix of high maneuverability and roominess for occupants and cargo, not to mention being the second vehicle in the lineup to adopt the evolved Kodo design language first expressed on the latest Mazda3.  In Europe, the CX-30 offers buyers a range of engines from a Skyactiv-D 1.8-liter diesel to the new Skyactiv-X engine with gasoline compression ignition. Last month, Motor Trend dug up a California Air Resources Board document listing the two engines and two transmissions for the North American market. Our continent gets the 2.0-liter four-cylinder mated to a six-speed manual or a six-speed automatic, and a 2.5-liter four-cylinder mated solely to a six-speed auto. The smaller engine and manual transmission are expected to be reserved for Canadian and Mexican buyers. The U.S. likely gets the 2.5-liter, the engine that makes 186 horsepower and 186 pound-feet of torque in the Mazda3 and 187 hp in the CX-5.  Mazda's i-Activ all-wheel drive is predicted from launch, and safety features should include front cross-traffic alert, adaptive cruise control, and driver monitoring linked to a Smart Brake Support system that cuts the reaction time to issue a the driver a brake warning. The CX-30 will share the Mazda stand with the 2019 Mazda MX-5/Miata RF, refreshed 2020 CX-5 and 2020 CX-9 crossovers, the 2020 Mazda 3, and Mazda3 TCR racer. Anyone with some free time at 1:20 p.m. Pacific Time on November 11 is welcome to stream the press conference at Mazda's YouTube channel.

Mazda's rotary engine may live on as a range extender (UPDATE)

Update: We received a response from Mazda that confirmed plans for a 2019 electric car available in battery-only and range-extended models, but there was no comment on any other details. The text has been updated to reflect this. It may be time for rotary fans to start getting their hopes up a little for a return of the spinning triangle engine. Automotive News spoke with Mitsuo Hitomi, the man in charge of Mazda powertrains, who said there's a very good chance the next implementation of the rotary engine will be as an electric car range extender. The news source also suggests that such a vehicle could be just around the corner, since Akira Kyomen, Mazda's vehicle development program manager, confirmed to Automotive News that the company will have an EV out in 2019 in both pure electric and range-extended versions. We reached out to Mazda for more information, and a representative confirmed both the pure electric and range-extended models for 2019, but couldn't comment on anything else regarding those vehicles. Looking back, we have reason to believe that this really might happen. As far back as 2013, Mazda was working on a rotary-engine range-extended electric car in the form of the Mazda2 RE Range Extender. It had a total range of 250 miles, half of which came from its battery, the other half from a 330 cc rotary engine generator fueled by a 2.6-gallon gas tank. More recently, Mazda has also teased rotary power with the RX-Vision concept at the 2015 Tokyo Motor Show and another rumored rotary concept at this year's show, which could be the design concept teased recently. But most convincing is the patent we found from Mazda that described a range-extended electric car that would specifically use a rotary engine. The powertrain layout looks just like the one used in that Mazda2 concept. There's also the fact that, as we've previously pointed out, and as Hitomi mentioned to Automotive News, the rotary could be a good range-extender due to its compact size and smoothness. Of course it also isn't known for being the most efficient engine, but if it isn't required to provide all the forward propulsion, it could be made small enough that it's frugal, and the added space and weight savings would be important for making the vehicle more practical, adding more batteries, or simply keeping the car lighter. This news might not excite rotary die-hards who have been waiting for an RX-7 and RX-8 successor, but they shouldn't quite abandon hope yet.

Mazda RX-7 could return in 2020

We like writing about the next Mazda RX-7 because it's like writing about the Chupacabra, Slenderman, or the Florida Skunkape, all of which are imaginary creatures seen by someone who knew someone who had an uncle whose dead great-grandfather's sister took a picture of it, invariably at night, while she was drunk, with her 1933 Kodak Brownie. Autocar is the latest with an RX-7 revival, saying it could come as soon as 2020 to celebrate Mazda's 100th anniversary. Before we get to that, let's take a brief look at RX-7 rumors. In 2009 there was speculation we'd get a concept RX-7 at the Tokyo Motor Show. That same year it was predicted the RX-8 would die to make room for a new RX-7 in 2012. In 2010 Mazda was developing a 300-horsepower rotary for the RX-7 that could run on gasoline or diesel and had better fuel economy and less oil consumption. Then Autocar said we could get the new RX-7 by 2013, a rumor that turned into a new RX-9 based on the Mazda MX-5 Miata platform. In 2012 the potential arrival date had become 2017. In 2013 the company CEO Masamichi Kogai said the equivalent of "Not gonna happen," and he said it again last year, just 90 days ago. It should be clear by now that this car is Mazda's version of the Lotus Esprit. Whew. Now that we're clear on all that, what does Autocar say? That a follow-up to the extinct RX-8 is coming that will sit on the new MX-5 Miata platform, and Mazda's vice president of European R&D said there are still 30 engineers working on rotary engines in partnership with universities. The successor will be front-engined and rear-wheel drive, have either two seats or 2+2 seating, and could be called RX-6, RX-7, or RX-9. That sounds like three distinct statements, only one of which is definitely true, that could possibly just maybe add up to a new RX-7, but could even more likely add up to a rotary-engined concept car that never sees production. We've only got five more years to wait, and since we've been begging at the RX-7 doors this long... Related Video: News Source: Autocar Rumormill Mazda Coupe Performance rotary rotary engine mazda rx-7