2008 Mazda 6 I Sedan 4-door 2.3l Silver Rear Spoiler on 2040-cars

Auto blog

2019 Mazda3 fuel economy announced for AWD, hatchback models

Although Mazda engineers gave us fuel economy numbers for one configuration of 2019 Mazda3 at the car's Los Angeles debut, there were still a few versions left out. Now Mazda has released the data for every body style, drivetrain and transmission configuration. That includes the all-new all-wheel-drive iteration, which we will have a full review of this week. Discerning these numbers is a tad tricky since there are three powertrain combinations for each 2019 Mazda3 bodystyle, and they all get slightly different fuel economy. We've listed the different combinations in a chart below: There are a few key takeaways, the first being that the sedan is always the most efficient version of the Mazda3, likely because of better aerodynamics compared to the hatchback. Second, all-wheel drive will cost you fuel economy due to the extra weight of the axles and differential, and the added drag on the engine. Third, the most efficient versions of each body have the same fuel economy numbers as the outgoing Mazda3. The manual transmission-equipped Mazda3 has actually improved fuel economy over the old version by 2 mpg on the highway, and 1 in combined driving. Also worth noting is that only one trim level of the sedan is available with cylinder deactivation and front-wheel drive, and that's the top-level Premium trim. Opting for all-wheel drive on any trim or body style will come with an engine with cylinder deactivation. The hatchback is also the only Mazda3 available with a manual transmission, and it's only offered on the front-drive version.

Miata is always the answer, but not always the best one

The Mazda MX-5 Miata is a surprisingly versatile car. Not only is it hilariously fun on back roads and closed courses, it can also be a decent daily driver thanks to its solid gas mileage and usable trunk. But, it doesn't excel in every driving situation. Specifically long trips at high speeds, and those involving canine companions. This weekend, I did a roughly 500-mile round trip to my parents' home in Indiana to pick up my recently adopted dog. The trip was 90-percent highways, and I heard every single mile. Our MX-5 Miata Club has the minimally insulated top also found on the base level trim, and at highway speeds the wind and road noise fills the cabin with a loud, steady roar. This likely won't be a problem for fans of white noise, and it can be overcome by the stereo. However, over a few hundred miles, it starts to get old. The suspension, while superb for carving corners, also gets tiresome. On rough Rust Belt highways, it would become a bit overwhelmed, and the whole car would shiver and shake. On the plus side, nothing squeaked, rattled, or fell off in these instances. There are a few other quirks that show up on long trips. The small pedal box and floor-mounted throttle means that there isn't a particularly comfortable place to rest your right foot when the cruise control is set. Neither the door nor the center console have much padding either, so leaning your knees against them for long periods of time isn't advisable. The good news is that the seat itself was surprisingly comfortable, and never once was I feeling any back pain. Plus, when not using the cruise control, the seating position is great, allowing me to stretch out and relax. When I picked up my four-legged compatriot (a 7-year-old mix of unknown breeds named Ruby, pictured above), things became a tad tight. Standing up, she thoroughly filled the passenger compartment. For reference, she's a little over 50 pounds and stands a little more than 2 feet tall. Much bigger dogs, like my family's coonhound and German shepherd mix, won't really fit. This also made her prone to nearly face-planting on the dashboard anytime the car slowed down. She eventually figured out that simply curling up on the seat bottom was the best choice, and then slept for most of the trip. So it worked out, but I think I may have found the limit of a Miata's dog capacity. Would any of this make me want a Miata less? Certainly not. That is if I had a second car.

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.